Anything Wrong about my stting?

  • Hi guys,


    I installed Hyperion with only "internal grabber" option successfully but could not see Swirl effect at all, so I wanted to share my settings and log here just in case maybe you can see something wrong before I start to thiink if my hardware connection is wrong?


    Currently, only I see 3 led which lights white all the time


    Log

    Code
    SSH Traffic:ssh connectedssh out:     cat /storage/logfiles/hyperion.logssh in:     Hyperion Ambilight Deamon (469)ssh in:         Version   : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388ssh in:         Build Time: Jun  3 2017 02:06:37ssh in:     INFO: Selected configuration file: /storage/.config/hyperion.config.jsonssh in:     HYPERION INFO: ColorTransform 'default' => [0; 246]ssh in:     HYPERION INFO: ColorCorrection 'default' => [0; 246]ssh in:     HYPERION INFO: ColorAdjustment 'default' => [0; 246]ssh in:     LEDDEVICE INFO: configuration:ssh in:     {ssh in:         "colorOrder" : "grb",ssh in:         "name" : "Onur",ssh in:         "output" : "/dev/spidev0.0",ssh in:         "rate" : 1000000,ssh in:         "type" : "apa102"ssh in:     }ssh in:     INFO: Creating linear smoothingssh in:     HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0ssh in:     EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effectsssh in:     EFFECTENGINE INFO: Initializing Python interpreterssh in:     INFO: Hyperion started and initialisedssh in:     INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0ssh in:     BLACKBORDER INFO: threshold set to 0 (0)ssh in:     BLACKBORDER INFO: mode:defaultssh in:     startedssh in:     INFO: Json server created and started on port 19435ssh in:     INFO: Proto server created and started on port 19436ssh in:     DISPMANXGRABBER INFO: Display opened with resolution: 720x480ssh in:     BLACKBORDER INFO: threshold set to 0 (0)ssh in:     BLACKBORDER INFO: mode:defaultssh in:     INFO: Frame grabber created and startedssh in:     BORDER SWITCH REQUIRED!!ssh in:     CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0ssh in:     EFFECTENGINE INFO: effect finished



    hyperion.config.json

  • I will try, thank you so much.


    One small one: Troubleshooting says : "Put a wire between MOSI and MISO"


    My SK9822 4pin LED has got CI/CO and DI/DO at the middle so which one should I understand from MOSI/MISO?

  • I saw below log after giving below test command, any idea


    Given command


    Response:

  • Nope, above I mentioned my LED is 4pin :D


    So below test result mean everything OK, but nothing is changing once I give the command via Putty, so it means command can be sent but LED might be broken or incorrectly wired?

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!