Long story short, about 1 year ago i made my own ambilight with a rpi zero w and apa102 leds and it work fine with a grabber.
After i moved to my new house it just stop worked, so i replaced the rpi zero w with a rpi 3 because my usb hub was gving me problems with the zero.
But now i cant get anything to work, i even made a "dummy" with 4 leds just to get it to light up but i cant get it to work.
Pics of my rpi with just 4 leds,
Di connected to pin 19
CI connected to pin 23
https://photos.app.goo.gl/wqzqjikyCw1c7T7B7
https://photos.app.goo.gl/cPhB9M6m2bhgysgo6
In my normal rig i got a 10A 5V PSU but i think that the rpi shuld be able to handle 4 leds?
What i have done so far:
Flashed open elec (8.04)and get it started on my rpi.
Installed hyperion from Hypercon in Windows 10
Sent config file and restarted my rpi after
Connected to start hyperion but i get no light to show any boot effect and the color picker dont work ether.
Here is my config files:
https://drive.google.com/open?…MpYR1xXNKOPgJcBewIPorIBnm
I really hope that someone can help me here just to get the lights to light up, if i get the 4 led rig to work i will try to get my 150 led rig to work with grabber but that seems to be far away atm.
Best regards Lasse