I am having difficulty calibrating HyperCon with my setup:
RGB LED WS2812B connected to 5V-15A power supply and Data In connected to Pi Zero W pin 19.
Pi Zero W is connected to USB On the Go cable to Video Grabber UTV007.
Video Grabber is connected to RCA cables to RCA/AV -> HDMI box which is connected to the HDMI Splitter.
HDMI Splitter Input is connected to PS4, one Output to TV, the second to the RCA/AV -> HDMI box.
The LEDs are powered by the power supply from both ends (at first just one end of the strip, then tried both start and finish sections of the strip).
The Pi Zero W was first powered through the Mini USB -> standard 5V 1.8A phone charger.
Then I tried powering the Pi's 5V and Ground pins with the LED strip's 5V and Ground.
Then I tried powering the Pi's 5V and Ground pins into the power supply.
All my efforts have led to the same result:
Once the Hyperion color-wheel starts, it immediately turns white for 5 seconds then begins power cycling.
I have selected the WS281X-SPI driver Type with GRB Byte Order, LED Bottom Right Clockwise with 85, 45, 47 LEDs on the horizontal, left & right.
Blackborder detection is Enabled.
Linear Smoothing is enabled with Update Frequency at 30Hz.
Video Grabber is set to NTSC on HyperCon, and the RCA->HDMI device is set to NTSC.
I tried editing the hyperion.config.json to add the dmanum=10 line under the device block, but it still reacted the same way.
Is this a power issue?
Not sure if this log helps:
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: HYPERION INFO: ColorAdjustment 'default' => [0; 262]
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: LEDDEVICE INFO: configuration:
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: {
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: "colorOrder" : "grb",
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: "name" : "MyHyperionConfig",
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: "type" : "ws2812spi"
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: }
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: INFO: Creating linear smoothing
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: INFO: Hyperion started and initialised
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: started
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: INFO: Json server created and started on port 19444
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: INFO: Proto server created and started on port 19445
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: width=720 height=480
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:09:28 rpiHyperion hyperiond[2435]: INFO: V4L2 grabber created and started
ssh in: Apr 21 22:09:29 rpiHyperion hyperiond[2435]: BORDER SWITCH REQUIRED!!
ssh in: Apr 21 22:09:29 rpiHyperion hyperiond[2435]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 21 22:09:29 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:09:32 rpiHyperion hyperiond[2435]: EFFECTENGINE INFO: effect finished
ssh in: Apr 21 22:09:32 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:09:37 rpiHyperion hyperiond[2435]: INFO: Application closed with code 0
ssh in: Apr 21 22:09:37 rpiHyperion hyperiond[2435]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:09:37 rpiHyperion hyperiond[2435]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 21 22:09:37 rpiHyperion systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 21 22:09:37 rpiHyperion systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 21 22:09:42 rpiHyperion systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: Hyperion Ambilight Deamon (2477)
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: HYPERION INFO: ColorTransform 'default' => [0; 262]
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: HYPERION INFO: ColorCorrection 'default' => [0; 262]
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: HYPERION INFO: ColorAdjustment 'default' => [0; 262]
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: LEDDEVICE INFO: configuration:
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: {
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: "colorOrder" : "grb",
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: "name" : "MyHyperionConfig",
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: "type" : "ws2812spi"
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: }
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: INFO: Creating linear smoothing
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: INFO: Hyperion started and initialised
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: started
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: INFO: Json server created and started on port 19444
ssh in: Apr 21 22:09:42 rpiHyperion hyperiond[2477]: INFO: Proto server created and started on port 19445
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: width=720 height=480
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: INFO: V4L2 grabber created and started
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: BORDER SWITCH REQUIRED!!
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 21 22:09:43 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:09:46 rpiHyperion hyperiond[2477]: EFFECTENGINE INFO: effect finished
ssh in: Apr 21 22:09:46 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:10:51 rpiHyperion systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 21 22:10:51 rpiHyperion hyperiond[2477]: INFO: Application closed with code 0
ssh in: Apr 21 22:10:51 rpiHyperion hyperiond[2477]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:10:51 rpiHyperion hyperiond[2477]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 21 22:10:51 rpiHyperion systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 21 22:10:56 rpiHyperion systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 21 22:10:56 rpiHyperion hyperiond[2555]: Hyperion Ambilight Deamon (2555)
ssh in: Apr 21 22:10:56 rpiHyperion hyperiond[2555]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 21 22:10:56 rpiHyperion hyperiond[2555]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 21 22:10:56 rpiHyperion hyperiond[2555]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: HYPERION INFO: ColorTransform 'default' => [0; 262]
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: HYPERION INFO: ColorCorrection 'default' => [0; 262]
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: HYPERION INFO: ColorAdjustment 'default' => [0; 262]
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: LEDDEVICE INFO: configuration:
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: {
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: "colorOrder" : "grb",
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: "name" : "MyHyperionConfig",
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: "type" : "ws2812spi"
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: }
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: INFO: Creating linear smoothing
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: INFO: Hyperion started and initialised
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: started
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: INFO: Json server created and started on port 19444
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: INFO: Proto server created and started on port 19445
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: V4L2GRABBER INFO: width=720 height=480
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: INFO: V4L2 grabber created and started
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: BORDER SWITCH REQUIRED!!
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 21 22:10:57 rpiHyperion hyperiond[2555]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:10:59 rpiHyperion hyperiond[2555]: INFO: Application closed with code 0
ssh in: Apr 21 22:10:59 rpiHyperion hyperiond[2555]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 21 22:10:59 rpiHyperion systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 21 22:11:00 rpiHyperion systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 21 22:20:07 rpiHyperion systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: Hyperion Ambilight Deamon (2910)
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: HYPERION INFO: ColorTransform 'default' => [0; 262]
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: HYPERION INFO: ColorCorrection 'default' => [0; 262]
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: HYPERION INFO: ColorAdjustment 'default' => [0; 262]
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: LEDDEVICE INFO: configuration:
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: {
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: "colorOrder" : "grb",
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: "name" : "MyHyperionConfig",
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: "type" : "ws2812spi"
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: }
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: Creating linear smoothing
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: Hyperion started and initialised
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: started
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: Json server created and started on port 19444
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: Proto server created and started on port 19445
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: width=720 height=480
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: BLACKBORDER INFO: mode:default
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:20:07 rpiHyperion hyperiond[2910]: INFO: V4L2 grabber created and started
ssh in: Apr 21 22:20:08 rpiHyperion hyperiond[2910]: BORDER SWITCH REQUIRED!!
ssh in: Apr 21 22:20:08 rpiHyperion hyperiond[2910]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 21 22:20:08 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:20:11 rpiHyperion hyperiond[2910]: EFFECTENGINE INFO: effect finished
ssh in: Apr 21 22:20:11 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: started
ssh in: Apr 21 22:21:00 rpiHyperion hyperiond[2910]: INFO: Application closed with code 0
ssh in: Apr 21 22:21:00 rpiHyperion hyperiond[2910]: V4L2GRABBER INFO: stopped
ssh in: Apr 21 22:21:00 rpiHyperion hyperiond[2910]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 21 22:21:00 rpiHyperion systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 21 22:21:00 rpiHyperion systemd[1]: Stopped Hyperion Systemd service.
Alles anzeigen