1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + OSMC grabber failing

Discussion in 'Software Support' started by roman-huliak, 20 February 2019.

  1. roman-huliak

    roman-huliak New Member

    Messages:
    1
    Hardware:
    RPi3
    Hi,

    when i start hyperion service, system or grabber failing.

    RP: 3B
    OS: OSMC (latest)
    Power: 5V 10A
    SD-card: 32GB UHS-I
    Led: APA102 (4x50pcs strip)

    dmseg log
    Code:
    [  +0,002842] bcm2835_alsa bcm2835_alsa: card created with 8 channels
    [  +0,050015] media: Linux media interface: v0.10
    [  +0,049957] Linux video capture interface: v2.00
    [  +0,160271] usbtv 1-1.3:1.0: Fushicai USBTV007 Audio-Video Grabber
    [  +0,000260] usbcore: registered new interface driver usbtv
    [  +0,027124] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
    [  +0,000320] usbcore: registered new interface driver brcmfmac
    [  +0,041782] uart-pl011 3f201000.serial: no DMA platform data
    [  +0,132861] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
    [  +0,000943] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14
    ...
    ...
    ...
    
    NOW FAIL INFO:
    
    [feb20 18:32] usb 1-1.3: USB disconnect, device number 4
    [  +0,480954] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
    [  +0,350004] usb 1-1.3: unable to read config index 0 descriptor/start: -71
    [  +0,000016] usb 1-1.3: can't read configurations, error -71
    [  +0,328816] usb 1-1.3: new high-speed USB device number 6 using dwc_otg
    [  +0,131689] usb 1-1.3: unable to read config index 0 descriptor/all
    [  +0,000019] usb 1-1.3: can't read configurations, error -71
    [  +0,000088] usb 1-1-port3: attempt power cycle
    [  +0,658283] usb 1-1.3: new high-speed USB device number 7 using dwc_otg
    [  +0,032202] usb 1-1.3: unable to read config index 0 descriptor/start: -71
    [  +0,000020] usb 1-1.3: can't read configurations, error -71
    [  +0,317744] usb 1-1.3: new high-speed USB device number 8 using dwc_otg
    [  +0,033791] usb 1-1.3: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256
    [  +0,002776] usb 1-1.3: New USB device found, idVendor=1b71, idProduct=3002
    [  +0,000016] usb 1-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=2
    [  +0,000009] usb 1-1.3: Product: usbtv007
    [  +0,000011] usb 1-1.3: Manufacturer: fushicai
    [  +0,000008] usb 1-1.3: SerialNumber: 300000000002
    [  +0,001966] usbtv 1-1.3:1.0: Fushicai USBTV007 Audio-Video Grabber
    [feb20 18:33] usb 1-1.3: USB disconnect, device number 8
    [  +0,563727] usb 1-1.3: new high-speed USB device number 9 using dwc_otg
    [  +0,153370] usb 1-1.3: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256
    [  +0,002694] usb 1-1.3: New USB device found, idVendor=1b71, idProduct=3002
    [  +0,000012] usb 1-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=2
    [  +0,000009] usb 1-1.3: Product: usbtv007
    [  +0,000009] usb 1-1.3: Manufacturer: fushicai
    [  +0,000008] usb 1-1.3: SerialNumber: 300000000002
    [  +0,001970] usbtv 1-1.3:1.0: Fushicai USBTV007 Audio-Video Grabber
    [  +1,312067] random: crng init done
    [  +0,000018] random: 7 urandom warning(s) missed due to ratelimiting
    

    what is incorrect?