1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + Other Software Not starting on Boot

Discussion in 'Software Support' started by CoLuxe, 18 April 2018.

  1. CoLuxe

    CoLuxe New Member

    Messages:
    1
    Hardware:
    RPi1/Zero
    Hay,

    my Hyperion is not starting, when I put the RPI Zero on.
    I have to do that manually over Hypercon (First Stop, the Start) or over SSH ("service hyperion restart").
    Im using Raspbian Lite.

    In the Log is only this:

    Code:
    SSH Traffic:
    ssh connected
    ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
    ssh in:     -- No entries --
    
    My Config:
    {
    // DEVICE CONFIGURATION
    "device" :
    {
    "name" : "MyHyperionConfig",
    "type" : "ws2801",
    "output" : "/dev/spidev0.0",
    "rate" : 1000000,
    "colorOrder" : "rbg"
    },

    // COLOR CALIBRATION CONFIG
    "color" :
    {
    "channelAdjustment" :
    [
    {
    "id" : "default",
    "leds" : "*",
    "pureRed" :
    {
    "redChannel" : 180,
    "greenChannel" : 0,
    "blueChannel" : 0
    },
    "pureGreen" :
    {
    "redChannel" : 30,
    "greenChannel" : 255,
    "blueChannel" : 10
    },
    "pureBlue" :
    {
    "redChannel" : 10,
    "greenChannel" : 0,
    "blueChannel" : 200
    }
    }
    ],
    "temperature" :
    [
    {
    "id" : "default",
    "leds" : "*",
    "correctionValues" :
    {
    "red" : 255,
    "green" : 255,
    "blue" : 255
    }
    }
    ],
    "transform" :
    [
    {
    "id" : "default",
    "leds" : "*",
    "hsl" :
    {
    "saturationGain" : 1.0000,
    "luminanceGain" : 1.0000,
    "luminanceMinimum" : 0.3000
    },
    "red" :
    {
    "threshold" : 0.0000,
    "gamma" : 2.7000
    },
    "green" :
    {
    "threshold" : 0.0000,
    "gamma" : 2.5000
    },
    "blue" :
    {
    "threshold" : 0.0000,
    "gamma" : 2.5000
    }
    }
    ],
    // SMOOTHING CONFIG
    "smoothing" :
    {
    "type" : "linear",
    "time_ms" : 100,
    "updateFrequency" : 100.0000,
    "updateDelay" : 0
    }
    },

    // NO V4L2 GRABBER CONFIG
    // BLACKBORDER CONFIG
    "blackborderdetector" :
    {
    "enable" : true,
    "threshold" : 0.0,
    "unknownFrameCnt" : 600,
    "borderFrameCnt" : 50,
    "maxInconsistentCnt" : 10,
    "blurRemoveCnt" : 1,
    "mode" : "default"
    },

    // BOOTEFFECT CONFIG
    "bootsequence" :
    {
    "color" : [0,0,0],
    "effect" : "Rainbow swirl fast",
    "duration_ms" : 3000,
    "priority" : 700
    },

    // JSON SERVER CONFIG
    "jsonServer" :
    {
    "port" : 19444
    },

    // PROTO SERVER CONFIG
    "protoServer" :
    {
    "port" : 19445
    },

    // EFFECT PATH
    "effects" :
    {
    "paths" :
    [
    "/storage/hyperion/effects",
    "/usr/share/hyperion/effects"
    ]
    },

    // NO FRAME GRABBER CONFIG
    // NO KODI CHECK CONFIG
    // NO BOBLIGHT SERVER CONFIG
    // NO JSON/PROTO FORWARD CONFIG

    // LED CONFIGURATION
    "leds" :
    [
    {
    "index" : 0,
    "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 1,
    "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 2,
    "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 3,
    "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 4,
    "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 5,
    "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 6,
    "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 7,
    "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 8,
    "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 9,
    "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 10,
    "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 11,
    "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 12,
    "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 13,
    "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 14,
    "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 15,
    "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 16,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.8889, "maximum" : 1.0000 }
    },
    {
    "index" : 17,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.7778, "maximum" : 0.8889 }
    },
    {
    "index" : 18,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.6667, "maximum" : 0.7778 }
    },
    {
    "index" : 19,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.5556, "maximum" : 0.6667 }
    },
    {
    "index" : 20,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.4444, "maximum" : 0.5556 }
    },
    {
    "index" : 21,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.3333, "maximum" : 0.4444 }
    },
    {
    "index" : 22,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.2222, "maximum" : 0.3333 }
    },
    {
    "index" : 23,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.1111, "maximum" : 0.2222 }
    },
    {
    "index" : 24,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.1111 }
    },
    {
    "index" : 25,
    "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 26,
    "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 27,
    "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 28,
    "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 29,
    "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 30,
    "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 31,
    "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 32,
    "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 33,
    "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 34,
    "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 35,
    "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 36,
    "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 37,
    "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 38,
    "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 39,
    "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 40,
    "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    }
    ],

    "endOfJson" : "endOfJson"
    }

    Thanks for your help!
     
  2. abrenoch

    abrenoch Android Grabber Developer

    Messages:
    84
    Hardware:
    RPi1/Zero, RPi2
    I want to bump this thread... I am having the exact same issue, also running on a pi zero.

    I'm wondering if maybe just delaying the service startup would help with the problem
     
  3. Ryan

    Ryan New Member

    Messages:
    13
    Hardware:
    RPi1/Zero, RPi3
    Same problem here. Have you already found a solution?
     
    Last edited: 6 October 2018
  4. Peadar

    Peadar New Member

    Messages:
    3
    Hardware:
    RPi3
    Same problem but with pi 2
     
  5. Ryan

    Ryan New Member

    Messages:
    13
    Hardware:
    RPi1/Zero, RPi3
    Today i tried using Raspbien Jessie Lite instead of Stretch Lite. On Jessie it works just fine!
     
    • Like Like x 1
  6. rkayd

    rkayd New Member

    Messages:
    2
    This solved my problem. Running a Raspberry Pi Zero W, Hyperion now starts on boot/power up.
     
  7. Berrie Dirks

    Berrie Dirks New Member

    Messages:
    1
    Hardware:
    RPi1/Zero
    I'm having the same problem on a raspberry pi 1b with the newest version of Stretch lite. Installed the latest available version of raspbian Jessie lite http://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2017-07-05/
    This seems to work but it stops working again after I update the system with apt-get update/upgrade. It only works with a non up-to-date install of Jessie.

    When running stretch the hyperion service is running after startup but the LEDs don't turn on until the service is restarted.
    I'm happy to provide more information if needed.
     
  8. Ryan

    Ryan New Member

    Messages:
    13
    Hardware:
    RPi1/Zero, RPi3
    I ended up just using raspbian jessie, which works great for me.