Hi,
I have a project to build a wireless setup controlled by a camera.
The idea is to have a RPi Zero W on a wall, that shot the 60" TV and control LED with wifi using an ESP-32S.
I want a confirmation about the hardware before to buy:
- RPi Zero W + camera (I already have it, everything work)
- ESP-32S
- APA-102 5m 48/m IP30
- Power supply 5V 15A 75W
- Power Plug Adapter
So, here where I need some inputs please:
- For 60", I would need around 4m. APA-120 48/m is 14.4w/m. So for 4m, we will have 57.6w/12A. So the power supply of 5v 15A looks good, does it?
- Do I need a converter 5v to 3.3v for the ESP-32S? If yes, which one please? (15A will not kill it?)
- I am trying to be solder-less. But because my setup run on 12A, I don't find any connector 4pin 12mm (to connect LED strips) that can support 12A (AWG 18 or 19). This doesn't work, does it? Any advise for this please?
- Last question, what part/connectors do I am missing?
Thank you