WS2812B LEDs don't light up

  • I've been tinkering with hypercon since yesterday, using a Raspberry Pi 3b and WS2812B LEDs.
    I'm running an HDMI splitter to an AV converter to a USB Grabber to the Pi.
    The LED strip is connected to a 5V 20A external power supply, with ground running to the pi as well.
    Finally the Data cable is connected to GPIO 18 of the Pi.


    I'm using a fresh install of Raspbian stretch lite as of right now.


    I successfully tested the LEDs with strandtest.py, they work fine with exactly this setup.
    However, after creating my config.json, sending it to the Pi (seeing if it's there with "
    ls /etc/hyperion") and stopping and starting hyperion, nothing happens.


    This is the config.json : [MEDIA=pastebin]KCSyaYQw[/MEDIA]


    This is the Hyperion log : [MEDIA=pastebin]gRbtZC1i[/MEDIA]


    The thing that seems weird to me is the fact that the Pi had no problem controlling the LEDs with the external library.


    Any help is greatly appreciated.


    EDIT: Also the frame grabber is working withing Hypercon on PC, since i can take screenshots and also corrected the Crop values for the black borders.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!