Really appreciated but I'm still waiting for my Pi Zero to be delivered...
I was asking this just to be "prepared" when it arrives.
Many thanks BTW !!
SDR & HDR 1080p/4k capable setup with Hyperion-NG for Media Center
- Awawa
- Erledigt
-
-
-
congratulations very interesting this project, could someone explain to me how to install?
-
-
@sergoo_lbt nope, this version is up to the latest release of Hyperion 2.0.0.8. Later commits are not included.
@Bruno easiest way is to install SD image from the links I provided (link SDR & HDR 1080p/4k capable setup with Hyperion-NG for Media Center), then follow the official guide for Hyperbian https://docs.hyperion-project.org/en/user/HyperBian.html
Basic configuration is here:config
-
I've rebuilt SD card images from v8.2.0.8A2.
They include inside default LUT table now so it should work out of box.
Modifying LUT table is optional if you want to change brightness, tone mapping algorithm et.. -
-
-
Dont know - that screenshot tells me nothing unfortunately. Try desktop browser.
-
Dont know - that screenshot tells me nothing unfortunately. Try desktop browser.
It's the same there. Weird. After a few raspberry reboots, everything just worked. I'm sorry to bother you. -
@sergoo_lbt Delete your Cookies and try again...
-
@sergoo_lbt Delete your Cookies and try again...
Yes. That probably helped. I deleted cookies and rebooted raspberry at the same time. Thank you, friends! -
New support pre-release v8.2.0.8A3
It contains some tune up & fixes from feedback + Hyperion.NG latest commits (up to 9d2e442) as bonus:
- migration to Debian Buster caused that libglvnd0 library is necessary. Already included in deb dependency in previous release and now included in tar/lib Rpi containers.
- I suspect there are some issues with Dispmanx (even disabled in config) on certain Rpi setups with USB grabbers. Till it's clear up the Dispmanx is excluded from build.
- fix for cmake config when building with github Docker images as it disabled custom optimization for Rpi 3/4 systems. Previous releases are affected. -
HyperHDR_8.2.0.8A3 auf Dreambox TWO, Debian Buster.
All 5 instances (WLED) work directly with the USB grabber (MACROSILICON ProdID=2109).
Codegit clone --recursive https://github.com/awawa-dev/HyperHDR.git HyperHDR_v8.2.0.8A3 cd HyperHDR_v8.2.0.8A3 mkdir build && cd build cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_TINKERFORGE=OFF -DENABLE_X11=ON -DCMAKE_BUILD_TYPE=Release .. make -j6 make install/strip
Regards pclin
-
If I have activated signal detection, it stops after a while.
Effects are displayed, after deactivating signal detection everything works fine.Regards pclin
-
Could you post logs in Debug mode? I take a look.
BTW you've set very harsh condition for signal detection on very small area: even black border could trigger no signal. Till now I cant reproduce it on my system but it's still running.
-
I've been using these settings since alpha.6, and these problems only arise from alpha.7.
The error occurred after about 2.5 hours of long psychedelik YouTube videos, in the middle of a video (1:07:57).
gruß pclin
-
I dont know what's your resulution but assume 1024x768 without any cropping/decimation or whatever.
VMin=Hmin=0.01, VMax=Hmax=0.1
So detection area-rectangle start position is X=10 at left and Y=7 from top. It's offset.
Rectangle ends at X=102 and Y=76.
Default size/position for Hyperion is 0.25 and 0.75. It's very fast detecting procedure that exits when the first pixel above the threshold is found so you could try it.
The real quesion is if the grabber resumes at some point after it lost signal? -
The grabber does not come back after losing the signal.
Deactivating signal detection bring it back or restart hyperion.The Hyperion default values do not give me a satisfactory result.
Mainly I use hyperion (classic) and there the colors (details) are much better for me.
With the settings for hyperion-ng I come at least closer.Regards pclin
-
OK, I understand as I'm missing some features from old Hyperion too but these (VMin, Hmin, VMax, Hmax) settings are not correlated with colors. They are used only for signal detection area. Anyway grabber should resume on bright full screen scene.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!