Hi all,
I am using Hyperion NG V2 Alpha 2 on my Raspberry 1B. I have now successfully configured everything. Sadly I have no colors over the USB grabber, only white. But when I start effects or only some colors it works with the exact color.
Here is a picture what Hyperion is getting over the USB grabber:
I was running the same setup with the old hyperion and it worked with colors before.
Part of my Hyperion NG config (full one is attached):
Code
{
"backgroundEffect": {
"color": [
255,
138,
0
],
"effect": "Warm mood blobs",
"enable": true,
"type": "effect"
},
"blackborderdetector": {
"blurRemoveCnt": 1,
"borderFrameCnt": 50,
"enable": true,
"maxInconsistentCnt": 10,
"mode": "default",
"threshold": 5,
"unknownFrameCnt": 600
},
"boblightServer": {
"enable": false,
"port": 19333,
"priority": 128
},
"color": {
"channelAdjustment": [
{
"backlightColored": false,
"backlightThreshold": 0,
"blue": [
0,
0,
255
],
"brightness": 100,
"brightnessCompensation": 100,
"cyan": [
0,
255,
255
],
"gammaBlue": 1.5,
"gammaGreen": 1.5,
"gammaRed": 1.5,
"green": [
0,
255,
0
],
"id": "default",
"leds": "*",
"magenta": [
255,
0,
255
],
"red": [
255,
0,
0
],
"white": [
255,
255,
255
],
"yellow": [
255,
255,
0
]
}
],
"imageToLedMappingType": "multicolor_mean"
},
"device": {
"colorOrder": "grb",
"dma": 5,
"gpio": 18,
"hardwareLedCount": 1,
"invert": false,
"latchTime": 1,
"leds": 135,
"pwmchannel": 0,
"rewriteTime": 5000,
"rgbw": false,
"type": "ws281x",
"whiteAlgorithm": "subtract_minimum"
},
"effects": {
"disable": [
""
],
"paths": [
"$ROOT/custom-effects"
]
},
"flatbufServer": {
"enable": true,
"port": 19400,
"timeout": 5
},
"foregroundEffect": {
"color": [
0,
0,
255
],
"duration_ms": 3000,
"effect": "Rainbow swirl",
"enable": false,
"type": "effect"
},
"forwarder": {
"enable": false,
"flat": [
"127.0.0.1:19401"
],
"json": [
"127.0.0.1:19446"
]
},
"framegrabber": {
"cropBottom": 0,
"cropLeft": 0,
"cropRight": 0,
"cropTop": 0,
"device": "/dev/fb0",
"frequency_Hz": 30,
"height": 45,
"pixelDecimation": 8,
"type": "framebuffer",
"width": 80
},
"general": {
"name": "TV WS281X",
"showOptHelp": true,
"watchedVersionBranch": "Stable"
},
"grabberV4L2": {
"blueSignalThreshold": 1,
"cropBottom": 0,
"cropLeft": 0,
"cropRight": 0,
"cropTop": 0,
"device": "/dev/video0",
"greenSignalThreshold": 1,
"redSignalThreshold": 1,
"sDHOffsetMax": 0.75,
"sDHOffsetMin": 0.25,
"sDVOffsetMax": 0.75,
"sDVOffsetMin": 0.25,
"signalDetection": true,
"sizeDecimation": 4,
"standard": "PAL"
},
"instCapture": {
"systemEnable": false,
"systemPriority": 250,
"v4lEnable": true,
"v4lPriority": 180
},
"jsonServer": {
"port": 19444
},
"ledConfig": {
"bottom": 0,
"edgegap": 0,
"glength": 0,
"gpos": 0,
"hdepth": 8,
"left": 35,
"overlap": 0,
"position": 100,
"reverse": true,
"right": 35,
"top": 65,
"vdepth": 5
}, [...]
Alles anzeigen
Part of my old hyperion config (full one is attached):
Code
// Automatically generated configuration file for Hyperion ambilight daemon
// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.03.3 (22.10.2017)
{
// DEVICE CONFIGURATION
"device" :
{
"name" : "TV WS281X",
"type" : "ws281x",
"leds" : 135,
"colorOrder" : "grb"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"channelAdjustment" :
[
{
"id" : "default",
"leds" : "*",
"pureRed" :
{
"redChannel" : 255,
"greenChannel" : 0,
"blueChannel" : 0
},
"pureGreen" :
{
"redChannel" : 0,
"greenChannel" : 255,
"blueChannel" : 0
},
"pureBlue" :
{
"redChannel" : 0,
"greenChannel" : 0,
"blueChannel" : 255
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain" : 1.0000,
"luminanceMinimum" : 0.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 25.0000,
"updateDelay" : 0
}
},
// V4L2 GRABBER CONFIG
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "PAL",
"width" : -1,
"height" : -1,
"frameDecimation" : 2,
"sizeDecimation" : 4,
"priority" : 800,
"mode" : "2D",
"cropLeft" : 0,
"cropRight" : 0,
"cropTop" : 0,
"cropBottom" : 0,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.14,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "default"
},
// BOOTEFFECT CONFIG
"bootsequence" :
{
"color" : [0,0,0],
"effect" : "Rainbow swirl fast",
"duration_ms" : 3500,
"priority" : 700
},
// JSON SERVER CONFIG
"jsonServer" :
{
"port" : 19444
},
// PROTO SERVER CONFIG
"protoServer" :
{
"port" : 19445
},
// EFFECT PATH
"effects" :
{
"paths" :
[
"/storage/hyperion/effects",
"/usr/share/hyperion/effects"
]
},
// NO FRAME GRABBER CONFIG
// NO KODI CHECK CONFIG
// NO BOBLIGHT SERVER CONFIG
// NO JSON/PROTO FORWARD CONFIG
Alles anzeigen