Hyperion.ng startet nach update auf alpha6 nicht mehr

Paulchen-Panther · 1. Juni 2020

Bin gerade dabei das zu korrigieren.

Paulchen-Panther · 1. Juni 2020

https://github.com/Paulchen-Pa…s/tag/refs%2Fheads%2Ftest

u20p17 · 1. Juni 2020

Hi,
habe nun die neueste Version installiert und den raspbi neu gestartet --> funktioniert wieder nicht.

pi@raspberrypi:~ $ sudo netstat -tanp
Aktive Internetverbindungen (Server und stehende Verbindungen)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN 904/deCONZ
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 904/deCONZ
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 570/sshd
tcp 0 0 127.0.0.1:39078 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39036 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38960 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39118 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:37782 127.0.0.1:32809 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:39024 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39058 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:80 10.0.0.10:41070 VERBUNDEN 904/deCONZ
tcp 0 0 10.0.0.10:8088 10.0.0.15:53169 VERBUNDEN 904/deCONZ
tcp 0 0 127.0.0.1:39048 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39092 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39066 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39112 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39110 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39034 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38986 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39084 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39046 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39072 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39002 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39030 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39012 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39098 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39042 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38998 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38980 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38978 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38988 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39052 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39006 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39056 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39068 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39094 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39028 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:8088 10.0.0.10:47922 VERBUNDEN 904/deCONZ
tcp 0 0 127.0.0.1:39000 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39018 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39106 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38994 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38974 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39114 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39104 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:41070 10.0.0.10:80 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:39100 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39032 127.0.0.1:80 TIME_WAIT -
tcp 0 3104 10.0.0.10:22 10.0.0.15:53184 VERBUNDEN 1880/sshd: pi [priv
tcp 0 0 10.0.0.10:47922 10.0.0.10:8088 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:38958 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39070 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38970 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39050 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39026 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39020 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:51986 172.217.16.116:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39096 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38972 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39116 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38976 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38984 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38982 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39074 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39082 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:49554 35.158.19.84:443 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:38968 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39022 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39060 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39044 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39076 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39108 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39010 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39080 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38996 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38962 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39004 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39102 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39008 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:80 10.0.0.15:53167 VERBUNDEN 904/deCONZ
tcp 0 0 127.0.0.1:39086 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39054 127.0.0.1:80 TIME_WAIT -
tcp6 0 0 :::443 :::* LISTEN 614/domoticz
tcp6 0 0 :::6144 :::* LISTEN 614/domoticz
tcp6 0 0 :::8070 :::* LISTEN 614/domoticz
tcp6 0 0 :::32809 :::* LISTEN 533/homebridge
tcp6 0 0 :::8080 :::* LISTEN 1129/homebridge-con
tcp6 0 0 :::51826 :::* LISTEN 533/homebridge
tcp6 0 0 :::22 :::* LISTEN 570/sshd
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60134 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60206 TIME_WAIT -
tcp6 0 0 127.0.0.1:42411 127.0.0.1:43298 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60182 TIME_WAIT -
tcp6 0 0 127.0.0.1:44347 127.0.0.1:37406 TIME_WAIT -
tcp6 0 0 10.0.0.10:8070 10.0.0.15:53109 VERBUNDEN 614/domoticz
tcp6 0 0 127.0.0.1:37507 127.0.0.1:55882 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60232 TIME_WAIT -
tcp6 0 0 127.0.0.1:45377 127.0.0.1:57556 TIME_WAIT -
tcp6 0 0 127.0.0.1:32809 127.0.0.1:37782 VERBUNDEN 533/homebridge
tcp6 0 0 10.0.0.10:51826 10.0.0.6:62680 VERBUNDEN 533/homebridge
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60158 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60108 TIME_WAIT -
tcp6 0 0 10.0.0.10:8080 10.0.0.15:53140 VERBUNDEN 1129/homebridge-con
tcp6 0 0 127.0.0.1:43919 127.0.0.1:52562 TIME_WAIT -
tcp6 0 0 127.0.0.1:45833 127.0.0.1:38264 TIME_WAIT -

"hyperiond -d"

pi@raspberrypi:~ $ hyperiond -d
[hyperiond MAIN] <INFO> Set user data path to '/home/pi/.hyperion'
[hyperiond DAEMON] <DEBUG> <PythonInit.cpp:45:PythonInit()> Initializing Python interpreter
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond EFFECTFILES] <INFO> 39 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] <INFO> 22 effect schemas loaded from directory :/effects /schema/
[hyperiond EFFECTFILES] <INFO> 0 effects loaded from directory /home/pi/.hyperio n/custom-effects
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond BLACKBORDER] <DEBUG> <BlackBorderProcessor.cpp:65:handleSettingsUpdat e()> Set mode to: default
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentS tate()> Blackborder detector: enabled
[hyperiond DAEMON] <INFO> set screen capture device to 'dispmanx'
[hyperiond DAEMON] <ERROR> The dispmanx framegrabber can not be instantiated, be cause it has been left out from the build
[hyperiond V4L2:auto] <DEBUG> <Grabber.cpp:34:setVideoMode()> Set videomode to 0
[hyperiond V4L2:auto] <INFO> Signal threshold set to: {12, 12, 12}
[hyperiond V4L2:auto] <INFO> Signal detection is now disabled
[hyperiond V4L2:auto] <INFO> Signal detection area set to: 0.250000,0.250000 x 0 .750000,0.750000
[hyperiond DAEMON] <DEBUG> <hyperiond.cpp:484:handleSettingsUpdate()> V4L2 grabb er created
[hyperiond LEDDEVICE] <INFO> LedDevice 'apa102' found.
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:55:open()> _baudRate_Hz [1000000] , _latchTime_ms [0]
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:56:open()> _spiDataInvert [0], _s piMode [0]
[hyperiond JSONSERVER] <DEBUG> <JsonServer.cpp:27:JsonServer()> Created instance
[hyperiond FLATBUFCONNECTION] <INFO> Connecting to Hyperion: 127.0.0.1:19401
[hyperiond JSONSERVER] <INFO> Started on port 19444
[hyperiond EFFECTENGINE] <INFO> Run effect "Rainbow swirl fast" on channel 0
[hyperiond FLATBUFSERVER] <INFO> Started on port 19400
[hyperiond PROTOSERVER] <INFO> Started on port 19445
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:33:initServer()> Initialize Webserv er
[hyperiond WEBSERVER] <DEBUG> Previous line repeats 1 times
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Rainbow swirl fast], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register ne w input 'System/EFFECT' with priority 0 as inactive
[hyperiond HYPERION] <INFO> Initial foreground effect 'Rainbow swirl fast' start ed
[hyperiond EFFECTENGINE] <INFO> Run effect "Warm mood blobs" on channel 254
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Warm mood blobs], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register ne w input 'System/EFFECT' with priority 254 as inactive
[hyperiond HYPERION] <INFO> Inital background effect 'Warm mood blobs' started
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register ne w input 'System/GRABBER' with priority 250 as inactive
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentS tate()> Framegrabber: enabled
[hyperiond BOBLIGHT] <DEBUG> <BoblightServer.cpp:28:BoblightServer()> Instance c reated
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentS tate()> LED device: enabled
[hyperiond HYPERION] <INFO> Hyperion instance 'First LED Hardware instance' has been started
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:91:handleSettingsUpdate()> Apply We bserver settings
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:109:handleSettingsUpdate()> Set doc ument root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:91:handleSettingsUpdate()> Apply We bserver settings
[hyperiond WEBSERVER] <INFO> Started on port 8090 name 'Hyperion Webserver'
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:109:handleSettingsUpdate()> Set doc ument root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:175:handleSettingsUpdate()> Setup S SL certificate
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:191:handleSettingsUpdate()> Setup p rivate SSL key
[hyperiond WEBSERVER] <INFO> Started on port 8092 name 'Hyperion Webserver'
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:198:setInput()> Priority 254 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visibl e priority to 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:238:setInputImage()> Priority 0 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:298:setCurrentTime()> Timeout cl ear for priority 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visibl e priority to 254
[hyperiond WEBSOCKET] <DEBUG> <WebSocketClient.cpp:30:WebSocketClient()> New connection from ::ffff:10.0.0.15
[hyperiond WEBSOCKET] <DEBUG> <JsonAPI.cpp:102:handleInstanceSwitch()> Client '::ffff:10.0.0.15' switch to Hyperion instance 0
[hyperiond WEBSOCKET] <DEBUG> <WebSocketClient.cpp:204:sendClose()> send close: 1000

Nach dem hyperiond -d komm ich wieder auf die weboberfläche.

LG

Paulchen-Panther · 1. Juni 2020

Dann werde ich es für heute sein lassen. Ich meld mich wieder bei dir.
Danke für dein Verständnis.

Paulchen-Panther · 2. Juni 2020

Hallo @u20p17

Verwende am besten die deb Datei aus meinem Repo.
Nachdem du die .deb installiert hast führe folgenden Befehl im Terminal aus um den DIenst korrekt zu registrieren

Code

sudo systemctl enable hyperiond@pi.service --now

Ach ja. Der Fehler warum die WebUI nicht erreichtbar war ist, ein neu hinzugefügter V4L2 Treiber (BCM2835 ISP) im Linux Kernel.

Viel Spaß mit Alpha 6.

Grüße Paulchen

u20p17 · 2. Juni 2020

Danke, funktioniert wieder einwandfrei

Paulchen-Panther · 2. Juni 2020

Sollten Fragen aufkommen (die nicht mit der Farbkalibrierung der LEDs zu tun haben) immer raus damit.

Paulchen-Panther · 3. Juni 2020

Habe hier eine deb für dich, die den Dienst korrekt registriert bei installieren.
https://github.com/Paulchen-Pa…-alpha.6-Linux-armv7l.deb

Jetzt mitmachen!