Dein altes Problem dürfte ja nun erledigt zu sein, aber... Boahh... da scheint einiges in deiner Konfiguration nicht zu stimmen.
Geh' die mal von vorne durch, Startpunkt, Anzahl der LEDs, RGB-Reihenfolge usw.
Dein altes Problem dürfte ja nun erledigt zu sein, aber... Boahh... da scheint einiges in deiner Konfiguration nicht zu stimmen.
Geh' die mal von vorne durch, Startpunkt, Anzahl der LEDs, RGB-Reihenfolge usw.
was sagen den die logs?
Hi,
also in den Logs steht nicht so viel, hab mal auf DEBUG gestellt
2021-04-01T17:26:09.944Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Network unreachable'
2021-04-03T14:45:31.826Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Host unreachable'
2021-04-06T18:30:05.038Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.52
2021-04-06T18:30:05.089Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.188.52
2021-04-06T18:30:47.776Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2021-04-06T18:30:49.227Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.188.52
2021-04-06T18:30:49.227Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.188.52' switch to Hyperion instance 0
2021-04-06T18:31:59.024Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.52
Was die Konfig, sowohl WLED und Hyperion angeht, hatte ich auch schonmal im Verdacht, allerdings ist das eigentlich unlogisch, da ich seit Wochen nichts an den Konfigs geändert habe und das neue Problem plötzlich von heute auf morgen da war.
Um die Konfigs trotzdem einmal komplett neu anzulegen, gibt es sowohl in WLED wie auch in Hyperion eine möglichkeit alles auf Werkseinstellungen zurückzustellen?
Ich hab den Eindruck als ob das Hyperion Inputs von Kodi garnicht mehr richtig ankommen, seltsam ist auch das wenn ich in WLED z.b. nur Dunkelblau einstelle, alles Dunkelblau leuchtet, so wie es sein soll, wenn ich aber z.b. rot einstelle, dann leuchtet die rechte Seite(wenn man vorm Fernseher sitzt) konstant rot, die linke wechselt aber immer zwischen weiß und rot...
WLED zeigt folgende Infos
EDIT
gerade bin ich plötzlich ein Stück weitere gekommen, ich hab einfach mal unter Hyperion LED-Hardware die RGB Byte Reihenfolge
von RGB auf BGR geändert und gespeichert und seit dem ist zumindest im Moment das Flackern weg, hab dann wieder auf RGB umgestellt und aktuell sieht es wieder normal aus, so wie es sollte.....
Im Log steht jetzt
2021-04-06T18:40:22.011Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port : 19446
2021-04-06T18:40:22.012Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2021-04-06T18:40:22.012Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2021-04-06T18:40:22.012Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":true}]
2021-04-06T18:40:22.133Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-06T18:40:22.134Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-04-06T18:41:36.349Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:150:powerOff())
2021-04-06T18:41:36.349Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":false}]
2021-04-06T18:41:36.458Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-06T18:41:36.458Z [hyperiond LEDDEVICE] (INFO) Stopped LedDevice 'wled'
2021-04-06T18:41:36.460Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2021-04-06T18:41:36.460Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2021-04-06T18:41:36.460Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2021-04-06T18:41:36.460Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":204,"hardwareLedCount":204,"host":"192.168.188.35","latchTime":0,"type":"wled"}]
2021-04-06T18:41:36.460Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-04-06T18:41:36.460Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2021-04-06T18:41:36.460Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType : wled
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount : 204
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder : rgb
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime : 0
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":204,"hardwareLedCount":204,"host":"192.168.188.35","latchTime":0,"port":19446,"type":"wled"}]
2021-04-06T18:41:36.461Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.188.35 as an IP-address.
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.188.35:19446
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP : 192.168.188.35
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port : 19446
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2021-04-06T18:41:36.462Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2021-04-06T18:41:36.463Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":true}]
2021-04-06T18:41:36.581Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-06T18:41:36.582Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-04-06T18:44:44.024Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.52
2021-04-06T18:44:44.105Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.188.52
2021-04-06T18:47:46.907Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.52
Alles anzeigen
also in den Logs steht nicht so viel, hab mal auf DEBUG gestellt
Außer die Fehlermeldungen, die klar durch ERROR gekennzeichnet sind (auch ohne Debug Mode)
2021-04-01T17:26:09.944Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Network unreachable'
Starte das fehlerhafte Device mal über die Hyperion Fernsteuerung. Also den Schalter für Hardware Device auf an.
Geht es jetzt?
Hab schon eine neue Erkenntnis, wie unter Edit oben geschrieben ging es dann plötzlich, genau bis zur Werbung, dann war es wieder genau wie vorher.
Der Schalter Hardware Device ist immer auf an in hyperion wenn ich mich nicht täusche
Da das Problem immer noch besteht, hat vieleicht noch einer eine idee was es sein kann?
Log bitte, aber das volle...
Ich hab WLED oder das Netzteil in Verdacht.... Wenn ich hyperion deaktiviere dann ist der Stripe komplett aus und geht dann auch nicht mehr an wenn ich hyperion wieder anschalte.Wenn ich dann Wled Neustarte dann hab ich wieder diesen Blink Effekt auf dem halben Streifen.
2021-04-09T06:48:09.109Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Network unreachable'
2021-04-10T14:03:57.071Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:150:powerOff())
2021-04-10T14:03:57.072Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":false}]
2021-04-10T14:03:57.073Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2021-04-10T14:03:57.086Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.188.52
2021-04-10T14:03:57.148Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-10T14:04:01.639Z [hyperiond NETFORWARDER] (INFO) Forwarder change state to disabled
2021-04-10T14:04:03.410Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2021-04-10T14:04:03.410Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":true}]
2021-04-10T14:04:03.410Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-04-10T14:04:03.507Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-10T14:04:12.563Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.52
2021-04-10T14:04:12.604Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.188.52
2021-04-10T14:06:51.500Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:150:powerOff())
2021-04-10T14:06:51.500Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":false}]
2021-04-10T14:06:51.501Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2021-04-10T14:06:51.616Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-10T14:06:52.697Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2021-04-10T14:06:52.698Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":true}]
2021-04-10T14:06:52.699Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-04-10T14:06:52.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-10T14:06:55.649Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:50:handleCompStateChangeRequest()) Disable Hyperion, store current component states
2021-04-10T14:06:55.650Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Hyperion: disabled
2021-04-10T14:06:55.649Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: disabled
2021-04-10T14:06:55.650Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: disabled
2021-04-10T14:06:55.650Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 250
2021-04-10T14:06:55.650Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255
2021-04-10T14:06:55.650Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[250]
2021-04-10T14:06:55.651Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off
2021-04-10T14:06:55.652Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: disabled
2021-04-10T14:06:55.652Z [hyperiond X11] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop()
2021-04-10T14:06:55.652Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:150:powerOff())
2021-04-10T14:06:55.653Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":false}]
2021-04-10T14:06:55.654Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2021-04-10T14:06:55.775Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-10T14:06:59.027Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:67:handleCompStateChangeRequest()) Enable Hyperion, recover previous component states
2021-04-10T14:06:59.028Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Hyperion: enabled
2021-04-10T14:06:59.027Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-04-10T14:06:59.028Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-04-10T14:06:59.028Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2021-04-10T14:06:59.028Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2021-04-10T14:06:59.028Z [hyperiond X11] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-04-10T14:06:59.028Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2021-04-10T14:06:59.029Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.188.35/json/state] [{"on":true}]
2021-04-10T14:06:59.029Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-04-10T14:06:59.105Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2021-04-10T14:06:59.136Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
2021-04-10T14:06:59.136Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
2021-04-10T14:06:59.136Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[255]
2021-04-10T14:06:59.137Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-04-10T14:07:06.732Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.52
Alles anzeigen
Hier mal ein Video was ich meine, die Farbe passen nicht zum Bild und der linke Teil blinkt. Ich hab dann in Wled mal den Android Effekt aktiviert, der auch unten in der Mitte wo der Stripe auch anfängt normal los läuft und wenn er dann links oben ankommt in einem wilden blinken endet bevor er dann plötzlich weiter geht.
wie wird dein esp bestromt? hatte auch diesen effekt mal, lag daran das de esp in die knie gegangen ist weil die spannung nicht stabil war..
Der Strom für den Stripe und den Wemos kommen hier von https://www.btf-lighting.com/p…er?variant=23297001324644
Mein Elektriker meinte auch das die Spannung nicht konstant wäre und die Fehler daher kommen könnten. Hättest du eine Netzteil empfehlung? Dann würde ich das mal testen um die Fehlerquelle auszuschließen.
probier es einfach mal mit einem eigenen usb-netzteil, denk dran aber gnd zu verbinden mit dem netzteil, nur zum testen
Was meinst du mit eigenem USB Netzteil? An den Wemos? Und das aktuelle Netzteil vom Wemos wegnehmen, so das am Netzteil nur der Stripe hängt? Was meinst du mit GND Verbinden?
den strip bestromst du über das große netzteil, für den wemos nutzt du so ein ladestecke für smartphones. dann brauchst du noch von dem wemos pin G ein kabel was du mit dem großen netzteil auf V- verbindest
Hab es jetzt mal mit der USB Stromversorgung versucht, der effekt ist genau der gleiche, danach würde es ja wahrscheinlich eher am Stripe liegen wie am Netzteil.......
Damit scheint es ja am stripe zu liegen... Vieleicht hab ich ihn auch kaputt gelötet.... Ich hab noch so einen wie im anhang hier liegen, der hat aber 4 Kontakte, könnte ich den auch nutzen? Was mach ich mit dem 4 Kontakt?
Coolzero82: Das ist ein anderer LED-Typ. Sieht aus wie normale 12V RGB-LEDs, die nicht einzeln ansprechbar sind. Kannst du von daher für Hyperion-Ambilight leider vergessen.
Bevor du Hyperion oder WLED Effekten testest, solltes du erst in WLED eine feste Farbe einstellen.
Erst Rot, Grün und dann Blau.
Wenn das soweit funktioniert, kann man dann Effekte und Hyperion testen.
Wenn das nicht funktioniert ist entweder der Stripe (LED) defekt, oder deine Verbindungen sind nicht OK.
gruß pclin
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!