Hallo Zusammen,
mein HTPC ist über einen 4k AVR (ARC) angeschlossen.
In LibreELEC habe ich die Auflösung auf 1080p gesetzt und die 4k Auflösungen whiteflagged.
Nach dem Einschalten beider Geräte und hochfahren des Rechners, leuchtet leider nur die obere linke Ecke.
Wenn ich dann auf die Hyperion Weboberfläche gehe und unter Capturing Hardware/Platform Capture einmal auf speichern klicke, stimmt die LED Ausgabe. Ich brauche an den Einstellungen nichts verändern. Klick auf speichern reicht.
Folgend das log nach Neustart
Code
2020-10-24T12:35:15.830Z [hyperiond DAEMON] (INFO) CEC handler created
2020-10-24T12:35:15.835Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-10-24T12:35:15.837Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-10-24T12:35:15.837Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /storage/hyperion//custom-effects
2020-10-24T12:35:15.848Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized
2020-10-24T12:35:15.849Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-10-24T12:35:15.849Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-10-24T12:35:15.861Z [hyperiond DAEMON] (INFO) set screen capture device to 'x11'
2020-10-24T12:35:15.861Z [hyperiond X11GRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-10-24T12:35:15.861Z [hyperiond DAEMON] (INFO) X11 grabber created
2020-10-24T12:35:15.861Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-10-24T12:35:15.862Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2020-10-24T12:35:15.862Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled
2020-10-24T12:35:15.862Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2020-10-24T12:35:15.862Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-10-24T12:35:15.862Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:568:handleSettingsUpdate()) V4L2 grabber created
2020-10-24T12:35:15.863Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance
2020-10-24T12:35:15.864Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-10-24T12:35:15.865Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-10-24T12:35:15.865Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-10-24T12:35:15.865Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-10-24T12:35:15.865Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2020-10-24T12:35:15.873Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":108,"hardwareLedCount":1,"host":"192.168.178.41","latchTime":0,"type":"wled"}]
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 0ms
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType : wled
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount : 108
2020-10-24T12:35:15.873Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder : rgb
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime : 0
2020-10-24T12:35:15.873Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2020-10-24T12:35:15.874Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-10-24T12:35:15.874Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2020-10-24T12:35:15.874Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":108,"hardwareLedCount":1,"host":"192.168.178.41","latchTime":0,"port":19446,"type":"wled"}]
2020-10-24T12:35:15.874Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 0ms
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:44:init()) Successfully parsed 192.168.178.41 as an IP-address.
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:74:init()) UDP socket will write to 192.168.178.41:19446
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP : 192.168.178.41
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port : 19446
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-10-24T12:35:15.875Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.41/json/state] [{"on":true}]
2020-10-24T12:35:15.890Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-10-24T12:35:15.890Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-10-24T12:35:15.890Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-10-24T12:35:15.891Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2020-10-24T12:35:15.891Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2020-10-24T12:35:15.892Z [hyperiond X11] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-10-24T12:35:15.891Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-10-24T12:35:15.892Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-10-24T12:35:15.900Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-10-24T12:35:15.900Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-10-24T12:35:15.937Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-10-24T12:35:15.937Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate
2020-10-24T12:35:15.938Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key
2020-10-24T12:35:15.938Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-10-24T12:35:15.937Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-10-24T12:35:15.938Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-10-24T12:35:15.971Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 0 is now active
2020-10-24T12:35:15.971Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
2020-10-24T12:35:15.971Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-10-24T12:35:15.971Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-10-24T12:35:15.972Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-10-24T12:35:15.972Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.41/json/state] [{"on":true}]
2020-10-24T12:35:16.157Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [0x0] to [3840x2160]
2020-10-24T12:35:16.157Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
2020-10-24T12:35:16.157Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [0x0] to [480x270]
2020-10-24T12:35:16.158Z [hyperiond X11GRABBER] (INFO) Capture interface is now enabled
2020-10-24T12:35:16.207Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 250 is now active
2020-10-24T12:35:19.005Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:298:setCurrentTime()) Timeout clear for priority 0
2020-10-24T12:35:19.255Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 250
2020-10-24T12:35:19.256Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[250], previousPriority[0]
2020-10-24T12:35:23.290Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [200]
2020-10-24T12:35:23.293Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-10-24T12:40:52.464Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.51
2020-10-24T12:40:52.465Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.51' switch to Hyperion instance 0
2020-10-24T12:40:56.432Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.51
2020-10-24T12:40:56.450Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.51
2020-10-24T12:42:30.549Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.51
2020-10-24T12:42:30.559Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.51
2020-10-24T12:42:38.079Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.51
Alles anzeigen
Bin mir fast sicher, dass es am AVR liegt, da das Verhalten bei direkt angeschlossenem HTPC an den TV normal ist.
Hat jemand einen Einstellungs-Tipp?
Danke und Grüße