Raspberry 1 Model B Grabber

Multiplexer02 · 31. Oktober 2020

Hab Hyperion samt Grabber auf einem Raspberry 3 laufen. Wollte jetzt einen Raspberry 1 Model B nutzen da ich ihn hier noch rum liegen habe. Software und Webinterface laufen. Farben werden auch korrekt angesteuert. Grabber wird erkennt zeigt aber kein Bild. Woran kann das liegen?Auf dem Rasp3 geht alles.

Paulchen-Panther · 31. Oktober 2020

Nicht gleich so viele Details über dein Setup. Weiß ja gar nicht wo ich anfangen soll zu lesen

Multiplexer02 · 1. November 2020

Mm
Ich vermute es wird wohl mit der Erkennung des Grabbers am Raspberry 1 liegen.

Raspberry 3
Grabber : USB Grabber UTVF007
Hyperion aktuelle Version.
Funktioniert

Raspberry 1 Model B
Grabber : USB Grabber UTVF007
Hyperion aktuelle Version.
Funktioniert nicht.

Paulchen-Panther · 1. November 2020

Keine Setup Details = Keine Hilfe.

Multiplexer02 · 1. November 2020

Was genau meinst du?
Hilft das?

Hyperion Server:
- Build: (HEAD detached at 08909b8a) (Paulchen-Panther-75963ca9/08909b8a-1600115237)
- Build time: Sep 14 2020 21:05:54
- Git Remote: https://github.com/hyperion-project/hyperion.ng
- Version: 2.0.0-alpha.8
- UI Lang: auto (BrowserLang: de-DE)
- UI Access: expert
- Avail Capt: dispmanx,v4l2,framebuffer,qt

Hyperion Server OS:
- Distribution: HyperBian GNU/Linux 10 (buster)
- Arch: arm
- Kernel: linux (5.4.51+ (WS: 32))
- Browser: Mozilla/5.0 (Android 10;

Paulchen-Panther · 1. November 2020

Nein

Multiplexer02 · 1. November 2020

Was brauchst du denn für eine Info?
Software, Hardware habe ich genannt?

TPmodding · 2. November 2020

Der log wäre hilfreicher, da dort steht was passiert

Multiplexer02 · 2. November 2020

Hier mal ein Auszug meiner Log nach dem Neustart.
So ein Button für den Neustart fehlt noch irgendwie im WebInterface

Es wird nichts angezeigt. Auch bei der LED Visualisierung passiert nichts. Keine Zahlen mit den LEDS oder LiveVideo geht auch nicht. Bisher hat er mir auch nur das interne GrabberBild angezeigt wenn es mal ging.

2020-09-19T21:17:35.239Z [hyperiond DAEMON] (INFO) CEC handler created
2020-09-19T21:17:35.428Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-09-19T21:17:35.502Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-09-19T21:17:35.527Z [hyperiond EFFECTFILES] (INFO) 1 effects loaded from directory //.hyperion/custom-effects
2020-09-19T21:17:36.232Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized
2020-09-19T21:17:36.274Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-09-19T21:17:36.280Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-09-19T21:17:36.425Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-09-19T21:17:36.453Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-09-19T21:17:36.473Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480
2020-09-19T21:17:36.481Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-09-19T21:17:36.493Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-09-19T21:17:36.516Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-09-19T21:17:36.665Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2020-09-19T21:17:36.673Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2020-09-19T21:17:36.677Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2020-09-19T21:17:36.682Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-09-19T21:17:36.690Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:568:handleSettingsUpdate()) V4L2 grabber created
2020-09-19T21:17:36.697Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance
2020-09-19T21:17:36.714Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-09-19T21:17:36.497Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'ws2801'.
2020-09-19T21:17:36.504Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":119,"hardwareLedCount":119,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":1e+06,"rewriteTime":1000,"type":"ws2801"}]
2020-09-19T21:17:36.513Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms
2020-09-19T21:17:36.481Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-09-19T21:17:36.542Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-09-19T21:17:36.546Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-09-19T21:17:36.563Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [1000000], _latchTime_ms [0]
2020-09-19T21:17:36.573Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0]
2020-09-19T21:17:36.588Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-09-19T21:17:36.612Z [hyperiond EFFECTENGINE] (INFO) Run effect "Breath" on channel 0
2020-09-19T21:17:36.712Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Breath], smoothCfg [2]
2020-09-19T21:17:36.733Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-09-19T21:17:36.734Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Breath' started
2020-09-19T21:17:36.737Z [hyperiond EFFECTENGINE] (INFO) Run effect "X-Mas" on channel 254
2020-09-19T21:17:36.738Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [X-Mas], smoothCfg [2]
2020-09-19T21:17:36.739Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2020-09-19T21:17:36.740Z [hyperiond HYPERION] (INFO) Inital background effect 'X-Mas' started
2020-09-19T21:17:36.804Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-09-19T21:17:36.809Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-09-19T21:17:36.833Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/V4L' with priority 253 as inactive
2020-09-19T21:17:36.839Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-09-19T21:17:37.000Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2020-09-19T21:17:37.018Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
2020-09-19T21:17:37.046Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480
2020-09-19T21:17:37.084Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
2020-09-19T21:17:37.093Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-09-19T21:17:37.265Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2020-09-19T21:17:37.329Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-09-19T21:17:36.837Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-09-19T21:17:36.838Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-09-19T21:17:36.861Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2020-09-19T21:17:36.872Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2020-09-19T21:17:37.366Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-09-19T21:17:36.894Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-09-19T21:17:37.428Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-09-19T21:17:36.927Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-09-19T21:17:37.189Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
2020-09-19T21:17:37.196Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-09-19T21:17:37.202Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-09-19T21:17:37.531Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 250 is now active
2020-09-19T21:17:39.826Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-09-19T21:17:39.859Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-09-19T21:17:39.893Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-09-19T21:17:39.925Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-09-19T21:17:39.870Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-09-19T21:17:43.581Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:198:setInput()) Priority 254 is now active
2020-09-19T21:17:48.869Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.20
2020-09-19T21:17:48.922Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.20' switch to Hyperion instance 0
2020-09-19T21:17:51.868Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate
2020-09-19T21:17:51.889Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key
2020-09-19T21:17:51.898Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-09-19T21:19:26.161Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20
2020-09-19T21:19:26.246Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.20
2020-09-19T21:19:52.743Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20
2020-09-19T21:19:52.825Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.20
2020-09-19T21:21:00.087Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:50:handleCompStateChangeRequest()) Disable Hyperion, store current component states
2020-09-19T21:21:00.095Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Hyperion: disabled
2020-09-19T21:21:00.103Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: disabled
2020-09-19T21:21:00.115Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: disabled
2020-09-19T21:21:00.120Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:255:clearInput()) Removed source priority 250
2020-09-19T21:21:00.128Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: disabled
2020-09-19T21:21:00.145Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop()
2020-09-19T21:21:00.139Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:255:clearInput()) Removed source priority 253
2020-09-19T21:21:00.155Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: disabled
2020-09-19T21:21:00.178Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped
2020-09-19T21:21:00.181Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop()
2020-09-19T21:21:00.167Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2020-09-19T21:21:01.357Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:63:handleCompStateChangeRequest()) Enable Hyperion, recover previous component states
2020-09-19T21:21:01.364Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Hyperion: enabled
2020-09-19T21:21:01.368Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-09-19T21:21:01.369Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-09-19T21:21:01.370Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2020-09-19T21:21:01.371Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2020-09-19T21:21:01.386Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-09-19T21:21:01.387Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/V4L' with priority 253 as inactive
2020-09-19T21:21:01.396Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-09-19T21:21:01.419Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2020-09-19T21:21:01.423Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
2020-09-19T21:21:01.429Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480
2020-09-19T21:21:01.435Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
2020-09-19T21:21:01.438Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-09-19T21:21:01.452Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2020-09-19T21:21:01.459Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-09-19T21:21:01.412Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-09-19T21:21:01.500Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 250 is now active
2020-09-19T21:21:03.402Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20
2020-09-19T21:21:03.610Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.20
2020-09-19T21:22:05.520Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20
2020-09-19T21:22:05.640Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.20
2020-09-19T21:22:54.065Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2020-09-19T21:22:55.499Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.20
2020-09-19T21:22:55.515Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.20' switch to Hyperion instance 0
2020-09-19T21:23:09.087Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20
2020-09-19T21:23:09.224Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.20
2020-09-19T21:24:03.886Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20

TPmodding · 2. November 2020

wenn du effekte etc setzt dann funktioniert die ansteuerung der leds? nur über den grabber kommt nichts rein, richtig?

Multiplexer02 · 2. November 2020

Genau, wie ich es im ersten Post schrieb.

Awawa · 2. November 2020

Code

2020-09-19T21:21:01.370Z... Register new input 'System/GRABBER' with priority 250 as inactive
2020-09-19T21:21:01.387Z ....Register new input 'System/V4L' with priority 253 as inactive
2020-09-19T21:21:01.500Z ... Priority 250 is now active

250 < 253

Multiplexer02 · 3. November 2020

Immer noch kein Bild. Bild vom internen Grabber wird angezeigt und LED leuchten danach...Habe internen jetzt deaktiviert aber USB Grabber geht nich.

Code

2020-09-14T22:48:15.489Z [hyperiond DAEMON] (INFO) CEC handler created
2020-09-14T22:48:15.594Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-09-14T22:48:15.632Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-09-14T22:48:15.637Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory //.hyperion/custom-effects
2020-09-14T22:48:15.980Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized
2020-09-14T22:48:16.000Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: classic
2020-09-14T22:48:16.004Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-09-14T22:48:16.097Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-09-14T22:48:16.101Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-09-14T22:48:16.111Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480
2020-09-14T22:48:16.115Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-09-14T22:48:16.119Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-09-14T22:48:16.136Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-09-14T22:48:16.254Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2020-09-14T22:48:16.260Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled
2020-09-14T22:48:16.263Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2020-09-14T22:48:16.268Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-09-14T22:48:16.272Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:568:handleSettingsUpdate()) V4L2 grabber created
2020-09-14T22:48:16.279Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance
2020-09-14T22:48:16.285Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-09-14T22:48:16.150Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-09-14T22:48:16.154Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'ws2801'.
2020-09-14T22:48:16.165Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":119,"hardwareLedCount":119,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":1e+06,"rewriteTime":1000,"type":"ws2801"}]
2020-09-14T22:48:16.169Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms
2020-09-14T22:48:16.173Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-09-14T22:48:16.177Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-09-14T22:48:16.181Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [1000000], _latchTime_ms [0]
2020-09-14T22:48:16.182Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0]
2020-09-14T22:48:16.205Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-09-14T22:48:16.230Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-09-14T22:48:16.313Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-09-14T22:48:16.320Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-09-14T22:48:16.309Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-09-14T22:48:16.324Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-09-14T22:48:16.328Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-09-14T22:48:16.314Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-09-14T22:48:16.331Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
2020-09-14T22:48:16.356Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
2020-09-14T22:48:16.365Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2020-09-14T22:48:16.364Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-09-14T22:48:16.371Z [hyperiond HYPERION] (INFO) Inital background effect 'Warm mood blobs' started
2020-09-14T22:48:16.387Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/V4L' with priority 250 as inactive
2020-09-14T22:48:16.408Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-09-14T22:48:16.453Z [hyperiond V4L2:AUTO] (INFO) available V4L2 devices:
    /dev/video0    AV TO USB2.0
    /dev/video14    bcm2835-isp-capture0
    /dev/video15    bcm2835-isp-capture1


2020-09-14T22:48:16.466Z [hyperiond V4L2:AUTO] (INFO) search for usable video devices
2020-09-14T22:48:16.504Z [hyperiond V4L2:AUTO] (INFO) test v4l device: /dev/video0
2020-09-14T22:48:16.520Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480
2020-09-14T22:48:16.532Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
2020-09-14T22:48:16.538Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-09-14T22:48:16.573Z [hyperiond V4L2:AUTO] (INFO) found usable v4l2 device: /dev/video0 (AV TO USB2.0)
2020-09-14T22:48:16.598Z [hyperiond V4L2:AUTO] (INFO) Started
2020-09-14T22:48:16.612Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-09-14T22:48:16.429Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-09-14T22:48:16.627Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-09-14T22:48:16.434Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-09-14T22:48:16.697Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
2020-09-14T22:48:16.703Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-09-14T22:48:16.709Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-09-14T22:48:17.234Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-09-14T22:48:17.240Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-09-14T22:48:17.252Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-09-14T22:48:17.262Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-09-14T22:48:17.260Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-09-14T22:48:21.783Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:198:setInput()) Priority 254 is now active
2020-09-14T22:48:22.558Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate
2020-09-14T22:48:22.582Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key
2020-09-14T22:48:22.593Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-09-14T22:48:39.889Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.20
2020-09-14T22:48:39.913Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.20' switch to Hyperion instance 0
2020-09-14T22:48:41.782Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20
2020-09-14T22:48:41.927Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.0.20
2020-09-14T22:49:04.999Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.20

Alles anzeigen

TPmodding · 3. November 2020

eventuell kann es sein das der grabber zu wenig strom bekommt? hast du ein usb hub mit eigenem netzteil eventuell?

Multiplexer02 · 4. November 2020

Also hab den den Grabber mal an ein USB Hub gehangen, passiert genau das gleiche, also nix.
Was ich noch raus gefunden habe ist, wenn der USBGrabber aktiv ist geht nix. Kann keine Farben anzeigen, selbst der Farb Assistent geht nicht. Nur wenn ich den Plattform Grabber alleine aktiviere funktioniert alles. Als wenn sich das System mit dem USB Grabber aufhängt.

Denke, dass ich den Raspberry 1 dafür vergessen kann.

TPmodding · 5. November 2020

eventuell ne kleinere auflösung im grabber nutzen

Multiplexer02 · 5. November 2020

Keine Chance. Tut sich nix

Jetzt mitmachen!