Updated Windows Screen Grabber Available - Supports Multiple Displays & Servers, 4K UHD, DirectX 11

Sabaat Ahmad · 18. Oktober 2017

More details and download links can be found here:
https://hyperion-project.org/t…dows-screen-grabber.1018/

Alomamabobo · 24. Februar 2019

Tested today on a RPi3 b+ with APA102, a nice piece of soft, Thank You

LooseChange · 11. September 2020

The software is very nice, you are smarter than me if you can get it to work.

My hardware setup:
1. I have a pi4 with raspOS and apa102 leds connected directly to the pi to it with SPI pins (MOSI 19 and SCLK 23).
2. I have a windows 10 64bit PC running the Grabber software with 1080p resolution.

The problem:
Hyperion shows the startup rainbow and changes over to the idle effect, so the the leds and hyperion are working. Grabber says that it is connected Proto on port 19445 but hyperion just keeps showing the idle effect. I tried setting Grabber to DX9 and DX11, no change, hyperion doesnt show the Grabber output. I tried turning on and off Platform Capture in Hyperion, but that didn't change anything.

Any ideas?

LooseChange · 11. September 2020

Code

2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.Program.Main:0 - **********************************************************
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.Program.Main:0 - Application Startup. Logger Initialized.
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.Program.Main:0 - **********************************************************
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm..ctor:0 - Instantiating MainForm
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.SettingsManager.LoadSetttings:0 - Loading settings from user.config
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.SettingsManager.LoadSetttings:0 - Loaded settings from user.config
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.Helper.UpdateChecker.StartUpdateCheck:0 - Starting update check
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm..ctor:0 - MainForm Instantiated
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.MainForm_Shown:0 - MainForm Shown
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.Init:0 - Initialization requested with parameters reInit=False, forceOn=False
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.Init:0 - Initialization lock set
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.ToggleCapture:0 - Processing toggle capture command: ON
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.ToggleCapture:0 - Toggle capture lock set
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.ToggleCapture:0 - Executing toggle capture command on a new Thread[IsBackground = True]
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.ApiServer.StartServer:0 - Starting API server: localhost:9191
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.ApiServer.StartServer:0 - API server started
2020-09-10 17:13:09 [INFO] [1] HyperionScreenCap.MainForm.Init:0 - Initialization lock unset
2020-09-10 17:13:09 [INFO] [4] HyperionScreenCap.MainForm.EnableCapture:0 - Enabling 1 screen capture(s)
2020-09-10 17:13:09 [INFO] [4] HyperionScreenCap.Helper.HyperionTask.EnableCapture:0 - HyperionTask[ConfigurationId: ddadd9]: Enabling screen capture
2020-09-10 17:13:09 [INFO] [4] HyperionScreenCap.MainForm.EnableCapture:0 - Enabled 1 screen capture(s)
2020-09-10 17:13:09 [INFO] [4] HyperionScreenCap.MainForm.ExecuteToggleCaptureCommand:0 - Toggle capture command ON completed
2020-09-10 17:13:09 [INFO] [4] HyperionScreenCap.MainForm.ExecuteToggleCaptureCommand:0 - Toggle capture lock unset
2020-09-10 17:13:09 [INFO] [7] HyperionScreenCap.Helper.HyperionTask.InitScreenCapture:0 - HyperionTask[ConfigurationId: ddadd9]: Initializing screen capture
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.Helper.HyperionTask.InitScreenCapture:0 - HyperionTask[ConfigurationId: ddadd9]: Screen capture initialized
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.Helper.HyperionTask.ConnectProtoClients:0 - HyperionTask[ConfigurationId: ddadd9]: Connecting ProtoClient[10.0.2.110:19445 (10)]
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.ProtoClient.Dispose:0 - Disconnecting ProtoClient[10.0.2.110:19445 (10)]
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.ProtoClient.TryClearPriority:0 - Clearing Hyperion priority for ProtoClient[10.0.2.110:19445 (10)]
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.ProtoClient.TryClearPriority:0 - Hyperion priority cleared for ProtoClient[10.0.2.110:19445 (10)]
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.ProtoClient.Dispose:0 - ProtoClient[10.0.2.110:19445 (10)] disconnected
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.ProtoClient.Connect:0 - ProtoClient[10.0.2.110:19445 (10)] Init lock set
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.ProtoClient.Connect:0 - ProtoClient[10.0.2.110:19445 (10)] Init lock unset
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.Helper.HyperionTask.ConnectProtoClients:0 - HyperionTask[ConfigurationId: ddadd9]: ProtoClient[10.0.2.110:19445 (10)] connected
2020-09-10 17:13:10 [INFO] [7] HyperionScreenCap.NotificationUtils.Info:0 - Info notification: Connected to Hyperion server using ProtoClient[10.0.2.110:19445 (10)]!

Alles anzeigen

pho08 · 16. September 2020

try setting priority to 101

LooseChange · 17. September 2020

The priority of WHAT?
On the Hyperion webif I can set the priority of:
Instance capture :
- Platform capture (type Automatic) priority channel 250
- USB capture (off) priority channel 240

jochenf · 17. September 2020

hi,

inside the applikation, under the IP settings

regards

Michael

LooseChange · 18. September 2020

:kiss::kiss::kiss::puke::kiss::kiss::kiss: Thank you guys, the "1" in the priority gave me more pain than you can ever know. Fixed!

raptor_demon · 9. Oktober 2020

does anyone have this working on alpha 8? the hyperion screen capture says it is connected to hyperion but it does not show up under remote control.

what am i doing wrong?

Paulchen-Panther · 9. Oktober 2020

@raptor_demon which priority have you set in the windows screen grabber?

raptor_demon · 9. Oktober 2020

200 at the moment

Paulchen-Panther · 10. Oktober 2020

https://prnt.sc/uwffdw

raptor_demon · 10. Oktober 2020

That fixed it thanks! The default should probably be changed to help it integrate

Stirling · 7. August 2021

Hi guuys, I'm having a problem. I'm not sure if the problem is in the Windows Grabber or the Hyperion itself.

The screen being captured is not my whole screen, but just a fraction of it.

Let me show the image, this is what I see on my TV:

This is what hyperion is capturing, as you can see, only about 2/3 of the screen.

Does anyone know what I can do to solve this problem? Am I missing some configuration?

Lord-Grey · 7. August 2021

Stirling I would suggest you open an own thread and not intermingle your issue with another…

Please provide more detail…

Are you using Hyperion‘s screengrbber or an external one?

What is the Screengrabber‘s configuration? Are you using any cropping?

Stirling · 8. August 2021

Sorry, I replied this thread because I'm using the Windows Screen Grabber. Should I open another or can I use this one?

My Windows Grabber configuration is the following:

About the Hyperion configurations, I don't know which one could be related to this problem. I didn't find cropping nor resolution control for the data sent from the Windows Grabber.

Jetzt mitmachen!