Hallo ich hätte ein Problem. Nutze Hyperion NG auf dem Raspberry Pi 3 mit Libreelec.
wenn ich die Cololight einbinden möchte, passiert nichts. Es kommt nur die Meldung warten oder verlassen nach einiger zeit.
identifizieren kann ich de cololight strip. jedoch speichern funktioniert nicht.
vielen dank für eure hilfe.
Schöne Grüsse aus österreich
Martin
mein log:
Code
2021-01-06T08:07:36.685Z [hyperiond HYPERION] (INFO) Hyperion instance 'Cololight' has been stopped
2021-01-06T08:07:36.685Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.123' switch to Hyperion instance 0
2021-01-06T08:07:36.692Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.123
2021-01-06T08:07:37.352Z [hyperiond LEDDEVICE] (INFO) Stopped LedDevice 'cololight'
2021-01-06T08:07:50.349Z [hyperiond HYPERION] (DEBUG) (HyperionIManager.cpp:143:stopInstance()) Can't stop Hyperion instance index '1' with name 'Cololight' it's not running'
2021-01-06T08:07:55.617Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2021-01-06T08:07:57.096Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.123
2021-01-06T08:07:57.097Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.123' switch to Hyperion instance 0
2021-01-06T08:07:59.451Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2021-01-06T08:07:59.458Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2021-01-06T08:07:59.458Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-01-06T08:07:59.522Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'cololight'.
2021-01-06T08:07:59.523Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":300,"hardwareLedCount":1,"host":"192.168.0.185","latchTime":0,"type":"cololight"}]
2021-01-06T08:07:59.523Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-01-06T08:07:59.523Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2021-01-06T08:07:59.523Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.0.185 as an IP-address.
2021-01-06T08:07:59.523Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.0.185:8900
2021-01-06T08:07:59.524Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:69:init()) DeviceType : cololight
2021-01-06T08:07:59.524Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:70:init()) ColorOrder : rgb
2021-01-06T08:07:59.524Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:71:init()) LatchTime : 0
2021-01-06T08:07:59.525Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-01-06T08:07:59.526Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-06T08:07:59.528Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2021-01-06T08:07:59.531Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2021-01-06T08:07:59.531Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2021-01-06T08:07:59.532Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2021-01-06T08:07:59.533Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2021-01-06T08:07:59.534Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-01-06T08:07:59.535Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-01-06T08:07:59.536Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2021-01-06T08:07:59.538Z [hyperiond HYPERION] (INFO) Hyperion instance 'Cololight' has been started
2021-01-06T08:07:59.771Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:220:getInfo()) #LEDs found [0x12c], [300], distance [0]
2021-01-06T08:07:59.772Z [hyperiond LEDDEVICE] (INFO) Model not identified, assuming Cololight Strip
2021-01-06T08:07:59.772Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:112:initLedsConfiguration()) Model type : Strip
2021-01-06T08:07:59.773Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:127:initLedsConfiguration()) LedCount : 300
2021-01-06T08:08:00.286Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2021-01-06T08:08:00.286Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-06T08:08:00.286Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2021-01-06T08:08:00.287Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-01-06T08:08:00.299Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-01-06T08:08:00.299Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-06T08:08:00.460Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2021-01-06T08:08:03.485Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2021-01-06T08:08:03.486Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-06T08:08:03.486Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-06T08:08:03.486Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2021-01-06T08:08:03.735Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2021-01-06T08:08:03.736Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
2021-01-06T08:08:05.868Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.123' switch to Hyperion instance 1
2021-01-06T08:08:12.412Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1400:handleLedDeviceCommand()) message: [{"command":"leddevice","ledDeviceType":"cololight","subcommand":"discover","tan":453}]
2021-01-06T08:08:12.475Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:598:discover()) Cololight discovered at [192.168.0.185]
2021-01-06T08:08:12.977Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1424:handleLedDeviceCommand()) response: [{"devices":[{"domain":"home","hostname":"192.168.0.185","ip":"192.168.0.185","mac":"ac:67:b2:54:07:38","model":"OD_WE_QUAN","name":"QUAN","type":"HKC32"}],"ledDeviceType":"cololight"}]
2021-01-06T08:08:12.987Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1400:handleLedDeviceCommand()) message: [{"command":"leddevice","ledDeviceType":"cololight","params":{"host":"192.168.0.185"},"subcommand":"getProperties","tan":396}]
2021-01-06T08:08:12.988Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"type":"cololight"}]
2021-01-06T08:08:12.988Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-01-06T08:08:12.988Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2021-01-06T08:08:12.988Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.0.185 as an IP-address.
2021-01-06T08:08:12.988Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.0.185:8900
2021-01-06T08:08:13.213Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:220:getInfo()) #LEDs found [0x12c], [300], distance [0]
2021-01-06T08:08:13.213Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1434:handleLedDeviceCommand()) response: [{"distance":0,"ledBeadCount":300,"ledCount":1,"modelType":"Strip"}]
2021-01-06T08:08:15.066Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1400:handleLedDeviceCommand()) message: [{"command":"leddevice","ledDeviceType":"cololight","params":{"host":"192.168.0.185"},"subcommand":"identify","tan":1}]
2021-01-06T08:08:15.066Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"type":"cololight"}]
2021-01-06T08:08:15.066Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-01-06T08:08:15.066Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2021-01-06T08:08:15.066Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.0.185 as an IP-address.
2021-01-06T08:08:15.067Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.0.185:8900
2021-01-06T08:12:24.419Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2021-01-06T08:12:27.861Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.123
2021-01-06T08:12:27.862Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.123' switch to Hyperion instance 0
2021-01-06T08:12:28.389Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.123' switch to Hyperion instance 1
2021-01-06T08:12:33.038Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.123
Alles anzeigen