Hey guys,
I have a Pi B running the latest version of Hyperion-NG and a set of WS2812B's which I am powering with a 500W CPU Power Supply (for now).
I have the Pi Setup using GPIO18 and Common Ground with LEDs & PSU.
I have only 5m of LED's but 300 on that line and they just don't obey, thing is I have done this before same hardware and got it working, I have copied the settings (from Hyperion webpage, otherwise fresh install) from the first hardware but still for some reason the lights just do random s$£%!
The only difference between the setup working correctly and this one is the others running on a Pi 4.
I have tried setting static colour red, green or blue to all LED's which works on other setup but on mine the first LED is right then every other one is just random colour IDK WTF is going on?!
I have checked, double checked and triple checked the wiring, bullet connectors all around to ensure good connections but still no luck.
Information
Hyperion status: On
Platform: Raspberry Pi
Controller type: ws281x
Instance: GPIO18
Ports (flat|proto): 19400 | 19445
Your Hyperion version: 2.0.0-alpha.9
Watched version branch: Stable
Latest Hyperion version: 2.0.0-alpha.9
I have a common earth, it's only a short run and the software appears to be running correctly just the lights don't respond?!
5V Correctly serving light, not dimming wired from both ends (except data wired from one).
Any advise?!
Thanks