Is there any links to the docs for Instances, I couldn't find any?
Hyperion Instances
- davieboy
- Erledigt
-
-
What do you want to know?
-
thanks @Paulchen-Panther , It was originally relating to adding another Instance to run another Light project when playing audio, upon thinking about it after posting it did not make sense and i may have over though it rather than running whichever was needed at the time.
-
i want to run multiple Instances on a raspberry pi 4.
but i dont know how to add the second. For the first 1 i use the gpio 18.
-
woutermartens13 Go to Configuration/ General in the Hyperion UI. Add a new instance and start it. Now switch to the instance using the two arrow icon on the top right. Then configure your next LED device.
-
Which pin do i use for that? For the data? (on the pi)
-
can i use both Instances at the same time?
-
can i use both Instances at the same time?
in theory yes, if you have the ledstrip connected to the PIN the second one has to be connected to another PIN.
i didn't experiment with that myself, but what you can do
whats the kind/type of ledstrip that you have? You have probably two ws2812b strips yes?
the first instance/ledcontroller is PWM ws281x [GPIO 18 [PIN 12
the second you can take SPI controller ws2812 [GPIO 10 [PIN 19
make sure the SPI device0 is activated in config.txt
dtparam=spi=on
then it should work, let us know if this is okay
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!