Hyperion Not Detecting USB Video Capture
-
Manish Verma -
March 22, 2021 at 4:02 PM -
Thread is Resolved
-
-
that first screenshot, on that page if you scroll down to USB Capture, check the drop down boxes and see if you can define your device manually, or is it not showing up in there either?
-
-
its not 1 of the 2 devices listed?
-
Nope...i tried with both of those listed there but didn't work.
-
and have enabled the USB capture
what kind? whats the type and how did you connect it
-
-
Thread
LOOP capturing devices purchased from Amazon or Ali Express >> how to set up in Hyperion.NG? problem of re-apearing all the time in remote section/drivers, Only Raspi NOT Windows pc
hello folks,
because i read a lot of stories which i helped the members with this device i decided to make a thread out of this that goes for all capture devices type "LOOP"
no i am not working at Amazon or Ali express.
hyperion-project.org/index.php?attachment/4040/
we are are talking about this type of above device>> function is originally to use it for live streaming from game-pc or what not to a video card to record the session, or too split the screen into a double output for tv and…
Ambient_theater77March 20, 2021 at 2:02 PM take a look there.
maybe you find something that helps your problem. -
I read that thread... This is what it is written there
"
Go to the WebUI and menu USB grabber;
Device; USB video: USB video
Input; Camera1 ( or higher)
Resolution; in 16/9 lowest as possible and then build up the resolution
Size decimation; set to at least 4 until 12 >> the higher count, the worse image
Frames a second; 15FPS or go lower and higher.
"
The main issue is that my hyperion doesn't detect the usb capture in the first place...So i don't see the "USB Video" option under the USB capture tab to proceed further as instructed above.
-
I read that thread... This is what it is written there
"
Ofcourse i am not talking about that, i read your post of not detected by Hyperion> so Raspi is not detecting in first place.
if Hyperion thus Raspi not detects you can have a problem with USB power in config.txt
-
Manish Verma: Make a SSH connection to the RPi. Log in and type lsusb in the console. What's the output?
For more information about the video capture type dmesg | grep -i Video.
-
Manish Verma: Make a SSH connection to the RPi. Log in and type lsusb in the console. What's the output?
For more information about the video capture type dmesg | grep -i Video.
this is what i get from lsusb
And this is what i got from dmesg | grep -i Video
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835 .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=E4:5F:01:13:99:DE vc_mem.mem_base=0x 3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PART UUID=14543347-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 1.077470] vc-sm: Videocore shared memory driver
[ 4.246718] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.282566] videodev: Linux video capture interface: v2.00
[ 4.409032] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13
[ 4.409591] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14
[ 4.410027] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15
[ 4.410377] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16
[ 4.413394] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 4.427544] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 4.439965] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 277.585808] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 277.588895] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 277.588915] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 277.589316] usbcore: registered new interface driver uvcvideo
[ 277.589327] USB Video Class driver (1.1.1)
[ 278.944208] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 278.946022] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 278.946040] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 282.554011] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 282.555587] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 282.555605] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 287.337067] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 287.339027] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 287.339046] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 314.242626] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 314.244103] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 314.244121] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 318.512603] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 318.514438] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 318.514457] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 320.332414] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 320.333891] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 320.333908] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 322.283387] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 322.285290] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 322.285308] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 324.612217] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 324.613774] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 324.613793] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 328.392136] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 328.393634] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 328.393650] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 330.572066] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 330.573566] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 330.573584] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
When i plug any other usb device in my Rpi 4 like a flash drive ..it immediately shows up in lsusb
-
Hi I'm new here and have just got my first raspberry pi Hyperion project working with reasonable ease. From what I see my setup is exactly as you have done.
I might be able to offer an idea
I have noticed that the blue LED on my video capture device wasn't lighting up indicating a stable video input and Hyperion was not detecting the video capture device. I power cycled the video capture box including the 2 HDMI cables (as there is 5V power on the HDMI cable) and micro USB power and USB data cables.
When I connected the HDMI input source last I got the Blue LED and then Hyperion recognized the USB device and I could configure it as per the pic attached.
maybe your capture device needs the same reboot?
Hope this helps.
-
Display More
Hi I'm new here and have just got my first raspberry pi Hyperion project working with reasonable ease. From what I see my setup is exactly as you have done.
I might be able to offer an idea
I have noticed that the blue LED on my video capture device wasn't lighting up indicating a stable video input and Hyperion was not detecting the video capture device. I power cycled the video capture box including the 2 HDMI cables (as there is 5V power on the HDMI cable) and micro USB power and USB data cables.
When I connected the HDMI input source last I got the Blue LED and then Hyperion recognized the USB device and I could configure it as per the pic attached.
maybe your capture device needs the same reboot?
Hope this helps.
Yeah it worked but the USB Video option vanishes after sometime
-
Manish Verma: Seems the "Video capture with loop" is not recognized in your system.
If you have a windows PC, stick in the capture card and open the camera app.
The RGB test picture should appear the monitor.
-
The video capture device is working fine when i checked with OBS in my windows pc..But in Hyperion it works for just a few minutes and then vanishes...
I think i have to try with some other video capture device.
-
Strange... normally all devices with Macrosilicon 2109 chipset (534d:2109) works fine...

-
are you maybe setting the resolution too high and crashing the device? Does reducing it down make it more stable?
-
are you maybe setting the resolution too high and crashing the device? Does reducing it down make it more stable?
Nope i tried even with low resolution it didn't work..
-
The issue is resolved when i used a different video capture device..
-
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!