Hyperion.NG stopps after start/web configuration not available

  • Hi all,


    When the Pi3 starts, the rainbow effect appears. After about 20 seconds, the LEDs are off.

    Yesterday evening, all still functioned properly.


    Also, the web application is not accessible from Hyperion. Yesterday had also worked without problems.


    Anybody have an idea?

    I can't read the logs, because I can't get to the web interface.

    Can I get the logs from somewhere else to see where the problem is?


    Translated with http://www.DeepL.com/Translator (free version)

  • Can you do something with it?


    Schlafzimmer:~ # ps auxw

    PID USER TIME COMMAND

    1 root 0:13 /usr/lib/systemd/systemd

    2 root 0:00 [kthreadd]

    3 root 0:00 [rcu_gp]

    4 root 0:00 [rcu_par_gp]

    8 root 0:00 [mm_percpu_wq]

    9 root 0:00 [ksoftirqd/0]

    10 root 0:01 [rcu_sched]

    11 root 0:00 [rcu_bh]

    12 root 0:00 [migration/0]

    13 root 0:00 [cpuhp/0]

    14 root 0:00 [cpuhp/1]

    15 root 0:00 [migration/1]

    16 root 0:00 [ksoftirqd/1]

    18 root 0:00 [kworker/1:0H-kb]

    19 root 0:00 [cpuhp/2]

    20 root 0:00 [migration/2]

    21 root 0:00 [ksoftirqd/2]

    23 root 0:00 [kworker/2:0H-kb]

    24 root 0:00 [cpuhp/3]

    25 root 0:00 [migration/3]

    26 root 0:00 [ksoftirqd/3]

    29 root 0:00 [kdevtmpfs]

    30 root 0:00 [netns]

    35 root 0:00 [oom_reaper]

    36 root 0:00 [writeback]

    37 root 0:00 [kcompactd0]

    38 root 0:00 [crypto]

    39 root 0:00 [kblockd]

    40 root 0:00 [watchdogd]

    41 root 0:00 [rpciod]

    42 root 0:00 [kworker/u9:0-hc]

    43 root 0:00 [xprtiod]

    48 root 0:00 [kswapd0]

    49 root 0:00 [nfsiod]

    50 root 0:00 [cifsiod]

    51 root 0:00 [cifsoplockd]

    80 root 0:00 [iscsi_eh]

    81 root 0:00 [dwc_otg]

    82 root 0:00 [DWC Notificatio]

    83 root 0:09 [vchiq-slot/0]

    84 root 0:00 [vchiq-recy/0]

    85 root 0:00 [vchiq-sync/0]

    86 root 0:00 [vchiq-keep/0]

    87 root 0:00 [SMIO]

    88 root 0:00 [ipv6_addrconf]

    89 root 0:00 [kworker/2:2-eve]

    90 root 0:00 [irq/86-mmc1]

    109 root 0:00 [mmc_complete]

    118 root 0:00 [kworker/0:1H-mm]

    119 root 0:00 [kworker/3:1H-kb]

    134 root 0:00 [loop0]

    136 root 0:00 [jbd2/mmcblk0p2-]

    137 root 0:00 [ext4-rsv-conver]

    203 root 0:04 /usr/lib/systemd/systemd-journald

    215 root 0:00 [kworker/u8:2-ev]

    223 root 0:00 /usr/bin/rpcbind -f

    238 root 0:00 [kworker/0:2-eve]

    245 root 0:00 [kworker/3:2-eve]

    252 root 0:00 /usr/lib/systemd/systemd-udevd

    265 root 0:00 /usr/sbin/connman-vpnd -n

    267 root 0:01 /usr/lib/systemd/systemd-logind

    268 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket

    271 root 0:00 /usr/bin/pulseaudio --system --disallow-exit --exit-idle-t

    273 dbus 0:06 /usr/bin/dbus-daemon --system --address=systemd: --nofork

    275 root 0:00 /sbin/crond -f -S

    285 root 0:00 [spi0]

    307 root 0:00 [cfg80211]

    308 root 0:00 [brcmf_wq/mmc1:0]

    309 root 0:00 [brcmf_wdog/mmc1]

    316 root 0:00 /usr/sbin/sshd -D

    342 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf

    353 avahi 0:01 avahi-daemon: running [Schlafzimmer.local]

    373 root 0:00 /usr/bin/wpa_supplicant -u

    448 root 0:00 /usr/sbin/nmbd

    458 root 0:00 /usr/sbin/smbd

    462 root 0:00 {smbd-notifyd} /usr/sbin/smbd

    464 root 0:00 {cleanupd} /usr/sbin/smbd

    467 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs

    471 root 6:48 /usr/lib/kodi/kodi.bin --standalone -fs

    473 root 0:00 {lpqd} /usr/sbin/smbd

    508 root 0:00 [kworker/u9:2-hc]

    509 root 0:00 /usr/bin/hciattach /dev/serial1 bcm43xx 921600 noflow - b8

    518 root 0:00 /usr/lib/bluetooth/bluetoothd

    1030 root 0:00 [kworker/1:1-cgr]

    1080 root 0:00 sshd: root@pts/0

    1082 root 0:00 -sh

    1134 root 0:00 [kworker/1:1H]

    1138 root 0:00 [kworker/3:0H]

    1152 root 0:00 [kworker/2:1H]

    1177 root 0:00 [kworker/0:0H]

    1487 root 0:00 [kworker/u8:0-ev]

    1639 root 0:00 [kworker/0:1-cgr]

    1643 root 0:00 [kworker/2:3-eve]

    1664 root 0:00 [kworker/3:0-cgr]

    1681 root 0:00 [kworker/2:1-eve]

    1692 root 0:00 [kworker/1:2-cgr]

    1726 root 0:00 [kworker/2:0-eve]

    1735 root 0:00 ps auxw

  • I have now reset the entire system.

    Strangely, now only 2-4 LEDs light up and nothing else.

    Possibly now the LEDs are still broken?


    I can not get it to run now.

    So slowly it is enough for me. I have already bought almost everything 2-4 times because something is always broken.

  • maybe it's just a corrupted sd card and Hyperion is damaged by it.


    How do you turn off the PI ?

  • i turn of the pi like on/off Button on Kable.

    On my PI2 it works also since 3


    yes i did that to before, but people made me aware that it can hurt the SD card to bluntly cut of power of the PI.

    now i use a start/stop script on GPIO 3 to gentfully sign off the PI > goes into sleep > then cut the power

    or others there leave the PI always on.


    its possible hyperion is still running, can you execute hyperiond in the terminal?


    if it is respond will be " hyperion deamon is already running"


    if its not try to start it,



Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!