SOS. Can't make it work!

  • Hello there,


    I got the idea to build myself some abientlights using a raspberry pi.

    I follow a turtorial on the youtube, got all the parts and went on to execute it.



    Problem is the software side or gpio pin side


    What i did is:

    1) i installed rasbian and god the update/upgrades.

    2) i installed hyperion, by download and installing it.

    3) i went to hyperion(ipadres webbrowser) and followed allong the turtorial.


    For the gpio pin, i took the middle cable of the led lights and connected it to gpio18.


    (when in hyperion, the led lightswitch goes back off when i leave the page.)


    Hope someone can help me! :S

  • for PWM you have to run Hyperion under root> try this;


    go to config.txt and add a line without#


    dtparam=audio=off


    then in terminal

    sudo nano /etc/systemd/system/hyperiond@.service

    Remove the User sessionline and save with CTRL+O and exit CTRL+x.

    Don't forget to reboot

  • First of all thank you for your fast reply.


    I did the following, unplugged everything(because of frustration) and plugged it back.


    The lights work, im not in the dark anymore.

    Only thing that i am not able to make work is the ambilight part. How do i know if the capturecard works and how do i make sure hyperion can find it?

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!