Hi all,
I have been planning for a long time to install hyperion behind my 55" LG Oled tv.
I looked at multiple videos online and people where saying that a rpi zero should be fine and that following capture card would work great:
https://www.aliexpress.com/ite…042311.0.0.27424c4dLhfLg4
So all went great and I did the following:
RPI zero
WS2812 60l per meter, total 219 leds.
5V 6A power supply, connected with a dig uno where I didn't use the wemos d1, but just connected in the GPIO2 pin and similar GPIO 18 on the rpi zero.
https://imgur.com/a/ZNmNcYg
This worked and I managed to record a video of it working. Then the RPI zero started stuttering and was unresponsive so I decided that I was not able to use a rpi zero and redid things with a rpi 4.
Here I never really got it working, but that is probably because the dig uno had probably been damaged somehow.
Anyways, so I was getting a lot of no signal with my Apple TV 4k and I started to understand that this was due to the Capture card. Firstly I thought it was just under powered, but it seemed that it was not able to handle 4K HDR and max was 4K SDR.
As I would not be able to accept this, I reverted back to just connecting the attached LEDs to a dig uno which allows me to use WLED.
I would love to hear what I could have done differently in terms of grabber, as the recommendations on youtube is clearly not able to handle the latest and greatest (which I believe Philips Hue Sync box is?)
Would appreciate some input here so I can order a proper USB grabber and get this working at some point!
Thanks!