LED leuchten nicht -keine Fehlermeldung-

  • Hallo libe Community,

    ich habe mein Ambilight noch nicht zum laufen gebracht.


    Alle Beiträge hier habe ich schon durchforstet und ausprobiert.

    Die LEDs wollen einfach nicht leuchten. Ich bekomme aber auch keine Fehlermeldung via SSH Protokoll. Farben senden funktioniert, bringt aber kein Erfolg.


    Kann es sein das mein pi kaputt ist? Ich bekomm ja keine Fehlermeldung.

    Oder falsch angeschlossen? Hab ich irgendetwas übersehen?



    mein Setup:

    Pi 3b+ V.1.2

    Hyperion V1.3.5

    WS2801 15LED langer Teststreifen (an einer Seite angeschlossen; siehe Foto)

    den UTVF007 Grabber

    LibreELEC-RPi2.arm-9.2.8.img

    32004-20210728-170316-jpg

    32005-20210728-170333-jpg

    Config:


    // Automatically generated configuration file for Hyperion ambilight daemon

    // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)

    // Generated by: HyperCon (The Hyperion deamon configuration file builder)

    // Created with HyperCon V1.03.4 (02.02.2020)


    {

    // DEVICE CONFIGURATION

    "device" :

    {

    "name" : "MyHyperionConfig",

    "type" : "ws2801",

    "output" : "/dev/spidev0.0",

    "rate" : 921600,

    "colorOrder" : "rgb"

    },


    // COLOR CALIBRATION CONFIG

    "color" :

    {

    "channelAdjustment" :

    [

    {

    "id" : "default",

    "leds" : "*",

    "pureRed" :

    {

    "redChannel" : 255,

    "greenChannel" : 0,

    "blueChannel" : 0

    },

    "pureGreen" :

    {

    "redChannel" : 0,

    "greenChannel" : 255,

    "blueChannel" : 0

    },

    "pureBlue" :

    {

    "redChannel" : 0,

    "greenChannel" : 0,

    "blueChannel" : 255

    }

    }

    ],

    "temperature" :

    [

    {

    "id" : "default",

    "leds" : "*",

    "correctionValues" :

    {

    "red" : 255,

    "green" : 255,

    "blue" : 255

    }

    }

    ],

    "transform" :

    [

    {

    "id" : "default",

    "leds" : "*",

    "hsl" :

    {

    "saturationGain" : 1.0000,

    "luminanceGain" : 1.0000,

    "luminanceMinimum" : 0.0000

    },

    "red" :

    {

    "threshold" : 0.0000,

    "gamma" : 2.5000

    },

    "green" :

    {

    "threshold" : 0.0000,

    "gamma" : 2.5000

    },

    "blue" :

    {

    "threshold" : 0.0000,

    "gamma" : 2.5000

    }

    }

    ],

    // SMOOTHING CONFIG

    "smoothing" :

    {

    "type" : "linear",

    "time_ms" : 200,

    "updateFrequency" : 20.0000,

    "updateDelay" : 0

    }

    },


    // V4L2 GRABBER CONFIG

    "grabber-v4l2" :

    {

    "device" : "/dev/video0",

    "input" : 0,

    "standard" : "NO-CHANGE",

    "width" : -1,

    "height" : -1,

    "frameDecimation" : 2,

    "sizeDecimation" : 8,

    "priority" : 900,

    "mode" : "2D",

    "cropLeft" : 0,

    "cropRight" : 0,

    "cropTop" : 0,

    "cropBottom" : 0,

    "redSignalThreshold" : 0.0,

    "greenSignalThreshold" : 0.0,

    "blueSignalThreshold" : 0.0

    },


    // BLACKBORDER CONFIG

    "blackborderdetector" :

    {

    "enable" : true,

    "threshold" : 0.15,

    "unknownFrameCnt" : 600,

    "borderFrameCnt" : 50,

    "maxInconsistentCnt" : 10,

    "blurRemoveCnt" : 1,

    "mode" : "default"

    },


    // BOOTEFFECT CONFIG

    "bootsequence" :

    {

    "color" : [0,0,0],

    "effect" : "Rainbow swirl fast",

    "duration_ms" : 3000,

    "priority" : 700

    },


    // JSON SERVER CONFIG

    "jsonServer" :

    {

    "port" : 19444

    },


    // PROTO SERVER CONFIG

    "protoServer" :

    {

    "port" : 19445

    },


    // EFFECT PATH

    "effects" :

    {

    "paths" :

    [

    "/storage/hyperion/effects",

    "/usr/share/hyperion/effects"

    ]

    },


    // NO FRAME GRABBER CONFIG

    // NO KODI CHECK CONFIG

    // NO BOBLIGHT SERVER CONFIG

    // NO JSON/PROTO FORWARD CONFIG


    // LED CONFIGURATION

    "leds" :

    [

    {

    "index" : 0,

    "hscan" : { "minimum" : 0.9333, "maximum" : 1.0000 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 1,

    "hscan" : { "minimum" : 0.8667, "maximum" : 0.9333 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 2,

    "hscan" : { "minimum" : 0.8000, "maximum" : 0.8667 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 3,

    "hscan" : { "minimum" : 0.7333, "maximum" : 0.8000 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 4,

    "hscan" : { "minimum" : 0.6667, "maximum" : 0.7333 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 5,

    "hscan" : { "minimum" : 0.6000, "maximum" : 0.6667 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 6,

    "hscan" : { "minimum" : 0.5333, "maximum" : 0.6000 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 7,

    "hscan" : { "minimum" : 0.4667, "maximum" : 0.5333 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 8,

    "hscan" : { "minimum" : 0.4000, "maximum" : 0.4667 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 9,

    "hscan" : { "minimum" : 0.3333, "maximum" : 0.4000 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 10,

    "hscan" : { "minimum" : 0.2667, "maximum" : 0.3333 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 11,

    "hscan" : { "minimum" : 0.2000, "maximum" : 0.2667 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 12,

    "hscan" : { "minimum" : 0.1333, "maximum" : 0.2000 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 13,

    "hscan" : { "minimum" : 0.0667, "maximum" : 0.1333 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    },

    {

    "index" : 14,

    "hscan" : { "minimum" : 0.0000, "maximum" : 0.0667 },

    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }

    }

    ],


    "endOfJson" : "endOfJson"

    }




    SSH Protokoll:


    ssh connected

    ssh out: cat /storage/logfiles/hyperion.log

    ssh in: Hyperion Ambilight Deamon (468)

    ssh in: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780

    ssh in: Build Time: Aug 25 2019 10:39:29

    ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json

    ssh in: HYPERION INFO: ColorTransform 'default' => [0; 14]

    ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 14]

    ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 14]

    ssh in: LEDDEVICE INFO: configuration:

    ssh in: {

    ssh in: "colorOrder" : "rgb",

    ssh in: "name" : "MyHyperionConfig",

    ssh in: "output" : "/dev/spidev0.0",

    ssh in: "rate" : 921600,

    ssh in: "type" : "ws2801"

    ssh in: }

    ssh in: INFO: Creating linear smoothing

    ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0

    ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects

    ssh in: EFFECTENGINE INFO: Initializing Python interpreter

    ssh in: INFO: Hyperion started and initialised

    ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0

    ssh in: BLACKBORDER INFO: threshold set to 0.15 (39)

    ssh in: BLACKBORDER INFO: mode:default

    ssh in: started

    ssh in: INFO: Json server created and started on port 19444

    ssh in: INFO: Proto server created and started on port 19445

    ssh in: V4L2GRABBER INFO: width=720 height=480

    ssh in: V4L2GRABBER INFO: pixel format=YUYV

    ssh in: BLACKBORDER INFO: threshold set to 0.15 (39)

    ssh in: BLACKBORDER INFO: mode:default

    ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}

    ssh in: V4L2GRABBER INFO: started

    ssh in: INFO: V4L2 grabber created and started

    ssh in: V4L2GRABBER INFO: stopped

    ssh in: EFFECTENGINE INFO: effect finished

    ssh in: V4L2GRABBER INFO: started



    putty (mit Stopp- und Startbefehl):

    LibreELEC (official): 9.2.8 (RPi2.arm)

    LibreELEC:~ # killall hyperiond

    LibreELEC:~ # /storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.confi

    g.json

    Hyperion Ambilight Deamon (585)

    Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780

    Build Time: Aug 25 2019 10:39:29

    INFO: Selected configuration file: /storage/.config/hyperion.config.json

    HYPERION INFO: ColorTransform 'default' => [0; 14]

    HYPERION INFO: ColorCorrection 'default' => [0; 14]

    HYPERION INFO: ColorAdjustment 'default' => [0; 14]

    LEDDEVICE INFO: configuration:

    {

    "colorOrder" : "rgb",

    "name" : "MyHyperionConfig",

    "output" : "/dev/spidev0.0",

    "rate" : 921600,

    "type" : "ws2801"

    }


    INFO: Creating linear smoothing

    HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0

    EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects

    EFFECTENGINE INFO: Initializing Python interpreter

    INFO: Hyperion started and initialised

    INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0

    BLACKBORDER INFO: threshold set to 0.15 (39)

    BLACKBORDER INFO: mode:default

    started

    INFO: Json server created and started on port 19444

    INFO: Proto server created and started on port 19445

    V4L2GRABBER INFO: width=720 height=480

    V4L2GRABBER INFO: pixel format=YUYV

    BLACKBORDER INFO: threshold set to 0.15 (39)

    BLACKBORDER INFO: mode:default

    V4L2GRABBER INFO: signal threshold set to: {0,0,0}

    V4L2GRABBER INFO: started

    INFO: V4L2 grabber created and started

    V4L2GRABBER INFO: stopped

    EFFECTENGINE INFO: effect finished

    V4L2GRABBER INFO: started

  • Hallo marc-ambi,


    wenn du wie geschrieben schon alles durch hast, müsstest irgendwo mal gelesen haben das Libreelec und das "alte" Hyperion im Forum nicht mehr unterstützt werden. Das "neue" heißt Hyperion.ng. Aber mal zu deinem Problem denke das SPI noch nicht aktiv sind warum dein Stripe kein Licht von sich gibt.


    sudo raspi-config

    Inerface Options

    P4

    SPI aktivieren

    Finish

    sudo reboot now


    nach dem neustart sollte es nun laufen


    Gruß
    JumpigJoe

  • Sorry mein fehler ;)


    also nochmal von vorn

    in Putty

    mount -o remount,rw /flash

    nano /flash/config.txt


    bei mir ist es Zeile 48

    #dtparam=spi=on

    aus kommentieren in

    dtparam=spi=on


    Datei mit strg+o speichern

    und mit strg+x schließen

    mount -o remount,ro /flash

    reboot


    nun sollte es funktionieren

  • hab ich gemacht. Die Zeile 48 ist bei mir eine andere. Habe den Befehl jetzt ans Ende geschrieben.

    meine raspi-config sieht so aus:

    # SPDX-License-Identifier: GPL-2.0-or-later

    # Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)

    # Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)

    ################################################################################

    # Bootloader configuration - config.txt

    ################################################################################


    ################################################################################

    # Memory (System/GPU configuration )

    ################################################################################


    # Default GPU memory split (do not change if you do not know what you are doing)

    gpu_mem=128


    # Configure GPU memory based on SDRAM size - overrides above setting

    gpu_mem_256=112

    gpu_mem_512=160

    gpu_mem_1024=256

    ################################################################################

    # For overclocking and various other settings, see:

    # https://www.raspberrypi.org/do…nfiguration/config-txt.md

    ################################################################################

    # Set 'force_turbo=1' to disable dynamic overclocking and enable overclocking a>

    force_turbo=0


    # Make display smaller to stop text spilling off the screen

    #

    # Note that the overscan settings only affect the splash screen and not Kodi.

    #

    # If you experience overscan/underscan issues the best solution is to adjust

    # your TV settings ("full pixel", "1-1 pixel" etc.). Alternatively, there is a

    # calibration menu in the Kodi GUI.

    # disable_overscan=1


    # Force HDMI even if unplugged or powered off

    hdmi_force_hotplug=1

    Doesn't sent initial active source message.

    # Avoids bringing CEC (enabled TV) out of standby and channel switch when

    # rebooting.

    hdmi_ignore_cec_init=1


    ################################################################################

    # License keys to enable GPU hardware decoding for various codecs

    # to obtain keys visit the shop at http://www.raspberrypi.com

    ################################################################################


    # decode_MPG2=0x00000000

    # decode_WVC1=0x00000000


    ################################################################################

    # End of default configuration

    ################################################################################


    ################################################################################

    # Include distribution specific config file if it exists.

    ################################################################################

    #

    [all]

    include distroconfig.txt


    max_usb_current=1

    dtparam=spi=on

    hdmi_force_hotplug=1



    aber vorher sowie jetzt kommt in Putty:


    LibreELEC:~ # ls -l /dev/spi*

    crw------- 1 root root 153, 0 Apr 11 2019 /dev/spidev0.0

    crw------- 1 root root 153, 1 Apr 11 2019 /dev/spidev0.1

    LibreELEC:~ #


    bedeutet das nicht, das sie aktiviert sind?


  • kannst auch einen Test machen hab hier etwas gefunden.


    aber mal eine andere Frage. Kannst doch auch alles auf das einfache Raspberry Pi OS realisieren und dazu würde ich dir dann Hyperion.NG empfehlen. Es gibt genug Anleitungen im Netz wie man Kodi installiert und das in den Autostart bringt, Optional vielleicht RetroPi ;) da kann man in der Installationsroutine sogar auswählen ob RetroPi oder Kodi automatisch gestartet wird.

    Gruß JumpigJoe

  • moin,

    Ist beim HyperBian Image spi schon aktiviert?

    Also ich hab jetzt ein Pegelwandler noch dazwischen geschaltet. Muss ich die 5v Power von Raspberry mit dem Netzteil wie auf dem Foto verbinden? Und GND auch genau wie auf dem Bild verbinden?

  • Ist beim HyperBian Image spi schon aktiviert?

    Gute Frage… am besten mal unter sudo raspi-config nachschauen.

    Zum Rest, ja.


    Edit: Laut deiner Config sollte SPI schon aktiviert sein. Vlt mal den SPI-Test machen.

    Grüße aus Österreich / Greetings from Austria !

    - Don't wanna miss it anymore !

    Einmal editiert, zuletzt von Mike72 ()

  • Hab alles angeschlossen wie auf dem Bild. Aber es funktioniert nicht. Auch hab ich das SPI über raspi Config aktiviert. Der Spi Test hat gezeigt das mein spidev0.0 funktioniert.

    Hat Pin 19 und 23 das gleiche Potential wie GND? Wenn ich die beiden gegen GND messe steht da 0V ,ist das normal? Meines Erachtens kann ich 0V ja nicht zu 5V über den Pegelwandler hochskalieren.

    Was soll ich tun?

  • Zum Testen würde ich den Pegelwandler erstmal weg lassen. Und so anschließen


    wollen die Fehlerquelle so gering wie möglich halten. Wenn das Licht dann funktioniert könnte man den Pegelwandler wieder einbinden, wenn dann es nicht geht hat man sich bei irgendwas vertan.

  • Pin 19 bzw. 23 kannst du auch nicht mit einem Multimeter messen, das ist ein hochfrequentes Signal im kHz-Bereich. Ich würde dem Vorschlag von JumpigJoe folgen und erst mal schauen dass bei korrekter Konfig beim hochfahren der eingestellte Starteffekt über alle LEDs wiedergegeben wird.


    Edit: Hast du eigentlich ein Netzteil für alles, oder hat der RPi sein eigenes?

    Grüße aus Österreich / Greetings from Austria !

    - Don't wanna miss it anymore !

    Einmal editiert, zuletzt von Mike72 ()

  • Das Raspberry bekommt den Saft über microUSB. Ich hab alles so angeschlossen wie JumpigJoes Foto es zeigt. Es passiert nix, auch wenn ich ein anderen Effekt über Hyperion.NG einbette.

  • Micro USB kannst weglassen wenn es so wie im Bild angeschlossen wird

    Stimmt, hab' ich übersehen.


    marc-ambi: Wenn du die 5V Betriebsspannung für den RPi über die GPIOs einspeist brauchst du kein microUSB-Netzteil.

    Allerdings übergehst du damit die interne Schutzschaltung vom Pi. Also Netzteil auf genau 5V einstellen!

    Grüße aus Österreich / Greetings from Austria !

    - Don't wanna miss it anymore !

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!