THIS capture setup works great!

  • I bought this Zasluke 4K capture device (link below) for my Hyperion setup. It works great with Roku apps (XBox, Netflix, Disney+, Prime, YouTube, Hulu, etc.).

    I

    occasionally have an issue with the LEDs turn off when activating a device via my HDMI switchbox.


    To fix, I go to Hyperion WebUI, turn "Status" off from Dashboard, and the turn back on. This reactivated the lighting system.


    ZasLuke Capture Capture Record Playstation Switch

  • Ccan you please share the output from

    Code
    usb-devices
    v4l2-ctl --all
    v4l2-ctl --list-formats-ext

    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • Your devices and how they are connected would be interesting.

    Do you use 4K, HDR, DV, ARC, CEC and what are the results?

    Hyperion Version?

    RPI and OS?

    Stripes?


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

    2 Mal editiert, zuletzt von pclin ()

  • USB


    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 Mx

    Ch= 1

    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1

    P: Vendor=1d6b ProdID=0002 Rev=05.10

    S: Manufacturer=Linux 5.10.17-v7+ dwc_otg_hcd

    S: Product=DWC OTG Controller

    S: SerialNumber=3f980000.usb

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA

    I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driv

    er=hub


    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 Mx

    Ch= 4

    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1

    P: Vendor=0424 ProdID=2514 Rev=0b.b3

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA

    I: If#=0x0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driv

    er=hub


    T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 Mx

    Ch= 3

    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1

    P: Vendor=0424 ProdID=2514 Rev=0b.b3

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA

    I: If#=0x0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driv

    er=hub


    T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=480 Mx

    Ch= 0

    D: Ver= 2.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS=64 #Cfgs= 1

    P: Vendor=0424 ProdID=7800 Rev=03.00

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA

    I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driv

    er=lan78xx


    T: Bus=01 Lev=03 Prnt=03 Port=01 Cnt=02 Dev#= 4 Spd=480 Mx

    Ch= 0

    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

    P: Vendor=148f ProdID=5370 Rev=01.01

    S: Manufacturer=Ralink

    S: Product=802.11 n WLAN

    S: SerialNumber=1.0

    C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA

    I: If#=0x0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driv

    er=rt2800usb


    T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=03 Dev#= 6 Spd=480 Mx

    Ch= 0

    D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1

    P: Vendor=eba4 ProdID=7588 Rev=03.28

    S: Manufacturer=USB3.0 HD Audio Capture

    S: Product=USB3.0 HD Video Capture

    S: SerialNumber=HU123450

    C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=200mA

    I: If#=0x0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driv

    er=snd-usb-audio

    I: If#=0x1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driv

    er=snd-usb-audio

    I: If#=0x2 Alt= 0 #EPs= 0 Cls=0e(video) Sub=01 Prot=00 Driv

    er=uvcvideo

    I: If#=0x3 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driv

    er=uvcvideo

    pi@HyperBian:~ $




    Driver Info:

    Driver name : uvcvideo

    Card type : USB3.0 HD Video Capture: USB3.0

    Bus info : usb-3f980000.usb-1.1.3

    Driver version : 5.10.17

    Capabilities : 0x84a00001

    Video Capture

    Metadata Capture

    Streaming

    Extended Pix Format

    Device Capabilities

    Device Caps : 0x04200001

    Video Capture

    Streaming

    Extended Pix Format

    Media Driver Info:

    Driver name : uvcvideo

    Model : USB3.0 HD Video Capture: USB3.0

    Serial : HU123450

    Bus info : usb-3f980000.usb-1.1.3

    Media version : 5.10.17

    Hardware revision: 0x00000328 (808)

    Driver version : 5.10.17

    Interface Info:

    ID : 0x03000002

    Type : V4L Video

    Entity Info:

    ID : 0x00000001 (1)

    Name : USB3.0 HD Video Capture: USB3.0

    Function : V4L2 I/O

    Flags : default

    Pad 0x01000007 : 0: Sink

    Link 0x02000010: from remote pad 0x100000a of enti

    ty 'Processing 3': Data, Enabled, Immutable

    Priority: 2

    Video input : 0 (Camera 1: ok)

    Format Video Capture:

    Width/Height : 960/540

    Pixel Format : 'MJPG' (Motion-JPEG)

    Field : None

    Bytes per Line : 0

    Size Image : 518400

    Colorspace : sRGB

    Transfer Function : Rec. 709

    YCbCr/HSV Encoding: ITU-R 601

    Quantization : Default (maps to Full Range)

    Flags :

    Crop Capability Video Capture:

    Bounds : Left 0, Top 0, Width 960, Height 540

    Default : Left 0, Top 0, Width 960, Height 540

    Pixel Aspect: 1/1

    Selection: crop_default, Left 0, Top 0, Width 960, Height 54

    0, Flags:

    Selection: crop_bounds, Left 0, Top 0, Width 960, Height 540

    , Flags:

    Streaming Parameters Video Capture:

    Capabilities : timeperframe

    Frames per second: 30.000 (30/1)

    Read buffers : 0

    pi@HyperBian:~ $



    $ v4l2-ctl --list-formats-ext

    ioctl: VIDIOC_ENUM_FMT

    Type: Video Capture


    [0]: 'MJPG' (Motion-JPEG, compressed)

    Size: Discrete 1920x1080

    Interval: Discrete 0.017s (60.000 fp

    s)

    Interval: Discrete 0.033s (30.000 fp

    s)

    Size: Discrete 1280x720

    Interval: Discrete 0.017s (60.000 fp

    s)

    Interval: Discrete 0.033s (30.000 fp

    s)

    Size: Discrete 960x540

    Interval: Discrete 0.017s (60.000 fp

    s)

    Interval: Discrete 0.033s (30.000 fp

    s)

    Size: Discrete 800x450

    Interval: Discrete 0.017s (60.000 fp

    s)

    Interval: Discrete 0.033s (30.000 fp

    s)

    Size: Discrete 640x360

    Interval: Discrete 0.017s (60.000 fp

    s)

    Interval: Discrete 0.033s (30.000 fp

    s)

  • My Roku Express box displays at 1080p. I have it hooked to a 3x1 HDMI switch. But, to be certain the switch wasn't stripping the HDCP, I hooked direct to the capture device. I was able to get the same result without the switch. I haven't upgraded our TV service to 4k yet.


    I'm a newbie to the 4k/HDR world. I recently upgraded from a 2007 Philips Ambilight plasma TV that died. So I'm finding my way around terms and what settings work best.


    TV is an LG UP7070 Series 4k/UHD


    Running HyperBian alpha10 on a Pi3 B+

  • Hey pclin, forget the cookie monster, your the capture card monster... only joking ^^ . I'm waiting on a 3 input one output capture card that claims 4k@30fps on usb 3 and full spec hdmi at just under $80. I'll feed you the data, lol :D;(

  • The card is modest, no USB3.0, only MJPEG, no settings for brightness, contrast, saturation and hue, unusual resolutions.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

    Einmal editiert, zuletzt von pclin ()

  • I was surprised that some posts were mentioning that capture devices were no less than $80-100. This one was ~$30 US and seems to do a good job. I found the 1080p capture for lighting lagged a little for this project. But backing it down to 720p works great.


    At this price, the added functionality for HDCP devices was a big surprise.

  • james2brite

    4k 60 Hz HDR HDCP Switch amd ezcap 269 is a good solution.

    or

    4k 60 Hz HDR HDCP Switch, FeinTech or ezco Splitter 4K 60 HDR HDCP and Macrosilicon Grabber.


    Both is less than $80-100


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • yeah starting to struggle with this card also, originally had it running on usb2 lead - wouldn't play ball, got usb 3 lead still wont play ball.


    From what i can see so far this card does not want to work without using the loopback (reason why it wouldnt play ball on usb 2 and 3), had it all up and running last night capturing tv @ 1080 - this is a plus as last card would only get 720 but finished with tv last night and woke up to no signal, Ambientheater77 knows how much i hate being woke up to remove some hdmi cables form chinese devices to get a working tv again - so the loopback is pants imo in terms of stability.


    It does worry me tho why it will not work with only input 1 as my splitter is using EDID 1080p 2D 2CH so surely the card should be happy and operate without the loopback?


    pclin is pretty much spot on with it tho esp the usb speed - on usb 2 only @ 480M


    The only plus side that I can see would be if it worked without using loopback, yes there are no settings to fine tune the video but as it has a usb cable i would be tempted cut it open and run the power in the cable through a relay to control when the device is actually powered up rather than it being on 24/7, this way may expand its lifespan and stabilize the system a bit more.


    https://paste.ee/p/Y9VQw


    any ideas on how to get this running with HDMI splitter please let me know :thumbup:

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!