Hello all,
i configured my setup with a Raspberry Pi 4 and the Raspberry Pi OS lite with the following Tutorial.
I use a HDMI splitter and a 3RCA adapter.
My Raspberry Pi is connected with the Arduino via USB and gets detected by Hyperion.
The Arduino is connected with the LED strip on Pin 6.
Futhermore i have a Video grabber connected to my Raspi. The Video Grabber is connected to the 3RCA adapter, which is connected to the HDMI splitter and my PS4.
The Video Grabber gets detected by Hyperion as USB Recording Hardware "AV TO USB 2.0".
So far my setup "works". When i start my Raspberry, first the LED blink twice white. After that i get the Rainbow swirl.
I can even visualize the video input and see my PS4 screen.
But the colors I see are totally incorrect. For example, when I use the RGB Byte order Assistent, I always see two colors. My strip is then exactly divided in two which show two different colors.
At red: the first half is green and the second half is red.
At green: the first half is blue and the second half is green.
So instead of only showing one color i always get two different colors.
Sometimes when i restart, it only blinks twice and nothing happens after.
My Arduino code is from the hyperion Github.
Hyperion config:
When conected to the RaPi I can only find the "hyperion.config.jsoon.default". Where can I find my modified one?
Thanks for the help!