Hello, I'm running a Raspberry Pi 4B with an HDMI to USB capture card and an Enttec DMX USB Pro. I got DMX output working manually using Node and the dmx package from npm but struggled with acceptable camera image latency so I tried Hyperion out.
However, even when running effects from Hyperion the connected light doesn't react, even after a restart and not using any of my own software. The devices appear correctly (USB capture device and DMX output device) and I only have one light mapped to cover the entire screen - capture seems to be working but is a very dark representation of the screen sometimes. Where should I be looking to determine or change the DMX addressing layout? My light is at address 1 of universe 1 and is in 3-channel mode but in practice I may be using lights with an intensity channel at channel 1 and potentially other functions as well which displace the colour channels - a non-zero intensity channel output will also be necessary to get output from the lights in this case. I'd appreciate some help. Cheers
I am using Raspberry Pi OS 32-bit, flashed yesterday with fswebcam installed. I didn't install anything explicitly to handle DMX output, that works using the device /dev/ttyUSB0 as serial from Node.