Hello guys,
Is Multiple channel output can be works on hyperbian, for example first channel on GPIO 18 for LEDs no 1 to 200 and second channel on another GPIO for LEDs no 200 to 400, and each led fully controlled not paraleled
Thank you
Hello guys,
Is Multiple channel output can be works on hyperbian, for example first channel on GPIO 18 for LEDs no 1 to 200 and second channel on another GPIO for LEDs no 200 to 400, and each led fully controlled not paraleled
Thank you
Hi!
It should work, I believe you can control diffriend strips via diffrent GPIO's. In panel you can creat a number of instances.
Cant help you with DMA channel - no idea what is it
here you can put all your details about your leds.
How many of them, what GPIO they are connected and what's the RGB order.
Will help you more when home with acces to hyperion
DMA is a solid level setting that has to do with memory banks and your CPU in the Raspi, DMA channel is linked to activities and CPU on that channel which are sometimes are already in use.
normally DMA channel 5 is free to use, but u can also try DMA channel 10 if that fails.
See here why Hyperion‘s default channel is 10 now
Nice Info, in my case I use 2 strip connected to PIN 18 and PIN 13 on RPi, should I set both DMA channel differ on both instance, or it must on the same DMA channel?
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!