Hyperion not Idling

  • Hi all, just got my setup running yesterday and absolutely love it!!

    • Hyperion alpha 11 installed on Raspbian (rPi 4)
    • Rullz 4K capture card
    • WLED controller
    • APA102 strips, 60/m


    I have Effects set to run during "idle", but my effects never play. Even if I kill the feed to my capture card, all I get is the rainbow glow of the test pattern (see pic below).


    How do I get Hyperion to idle? Any help would be appreciated!


    • Hilfreichste Antwort

    I believe the problem is the capture card. Like mine it outputs the rainbox effect (in your image) and thus Hyperion is receiving a signal from it and therefore it's not idle. You'll need to power off the capture card to get an idle state. Pull the power to the capture card and see if the effects play then you'll know for sure. Then you'll have to a, live with it b,change the card or c, work out a convenient method for powering it down each time. See: this

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!