no usb

  • Enter usb-devices in the console and share the output.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • you mean this ?


    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1

    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1

    P: Vendor=1d6b ProdID=0002 Rev=05.10

    S: Manufacturer=Linux 5.10.63-v7+ dwc_otg_hcd

    S: Product=DWC OTG Controller

    S: SerialNumber=3f980000.usb

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA

    I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub


    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 5

    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1

    P: Vendor=0424 ProdID=9514 Rev=02.00

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA

    I: If#=0x0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub


    T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0

    D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=01 MxPS=64 #Cfgs= 1

    P: Vendor=0424 ProdID=ec00 Rev=02.00

    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA

    I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=smsc95xx


    T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0

    D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=1a86 ProdID=7523 Rev=02.54

    S: Product=USB2.0-Serial

    C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=96mA

    I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=02 Driver=ch341

    2 Mal editiert, zuletzt von Manny () aus folgendem Grund: Merged a post created by Manny into this post.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!