I built an hyperion ambilight setup but cannot get the lights to work. I'm sure that to someone with more experience, this will be easy to resolve. I've attached the debug log. TIA!
Modnar
I built an hyperion ambilight setup but cannot get the lights to work. I'm sure that to someone with more experience, this will be easy to resolve. I've attached the debug log. TIA!
Modnar
I built an hyperion ambilight setup but cannot get the lights to work. I'm sure that to someone with more experience, this will be easy to resolve. I've attached the debug log. TIA!
Modnar
Whats your setup?
leds, how you connect them etc.
I have a Raspberry Pi4. I followed the Ambilight Tutorial from Chris Majestic. I have BTF-LIGHTING WS2812B LED strip hooked up to the GPIO on the Pi. Here is the link to the tutorial I followed:
Externer Inhalt
www.youtube.com
Inhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.
Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.
It's already running with root.
Do you have a live image in Hyperion?
regards pclin
It's already running with root.
Do you have a live image in Hyperion?
Yes, I have a live image in Hyperion.
OK.
The problem you see in the log is
2022-05-06T02:53:16.173Z [ LEDDEVICE] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported'
Please more information about your system.
regards pclin
You need to update to a newer version of the Ws281x Library. Try Hyperion‘s nightly build.
Please more information about your system.
Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB)
Gofanco Prophecy 1x4 HDMI 2.0 Gaming Splitter with HDR (4K) to SDR (1080p) Enhancement – Auto Downscaler, 4K @60Hz 4:4:4, 18Gbps, Audio Extractor, EDID, 4 Port, 1 in 4 Out HDMI Splitter, TAA Compliant
Assletes Video Capture Card, 4K HDMI to USB 3.0 Video Capture Device, 1080P HD 60fps Broadcast Live and Record Video Audio Grabber
BTF-LIGHTING WS2812B RGB 5050SMD Individual Addressable 16.4FT 60Pixels/m 300Pixels
I'm attaching a picture of my setup. I did not include the logic level converter, capacitor, or resistor.
You need to update to a newer version of the Ws281x Library. Try Hyperion‘s nightly build.
I found the nightly build, installed it, and it works! Thank you so much for the help!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!