Rpi3 and 4k

  • In this case, your grabber will ensure that only FullHD is played back, which is connected to the splitter and then states that I can only do FullHD.

    This will be a problem of the EDID data.

    It is best to use a splitter that supports EDID Copy from the TV, then you have the best resolution that the TV also supports and Downscaler to Grabber.

    RPI3 has HDMI 1.4, 3840 × 2160p @ 24 Hz

    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    AudioDSP: miniDSP 2x4HD - Lautsprecher ELAC
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.12 (dreamOS)
    Hyperion-ng (Debian Buster)
    6 x Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    5-Port HDMI Switch - FeinTech VSP01201 - Grabber Macrosilicon


    Ambilight for ever

    Edited once, last by pclin ().

  • The grabber will be one with a macrosilicon chip. Input resolution is probably FullHD. The splitter can probably only do 4K 30 Hz and no HDCP, Settings for EDID are not available, probably no downscaler for the grabber either.

    It's best to read here.

    regards pclin

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!