Hello. I bought a splitetter VSP01201 and unfortunately CEC does not work for me. The TV is connected to HDMI OUT1, Fiere Stick to HDMI IN.
Could you please help me.
Problem with FeinTech VSP01201
- Mirek
- Unerledigt
-
-
HDMI-CEC communication is possible between source and HDMI 1.
Older VSP01201 could not CEC.
There are also HDMI cables where PIN 13 is not connected through.
regards pclin
-
I tried different HDMI cables - it's rather out
It looks more like an old model to me.
So only soldering PIN 13 remains?
-
I would open the device and measure if PIN 13 goes through from HDMI IN to HDMI OUT 1.
You can also do this with an 'old' Hdmi cable, cut through and measure PIN 13 CEC.
With the browser search you can find out the color of the cable.
regards pclin
-
Thank you for your help.
Regards.I cut the old HDMI cable and after measuring it turned out that there is no transition on pin 13. Sorry for my English, I'm writing through a translator.
-
there was a person here on the forum who connected the inbound and outbound HDMI pin13 together and had a successful working CEC after that.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!