Hallo zusammen,
ich habe aktuell folgende Hardware mit Hyperion 2.0.14 im Einsatz:
LED's: WS2801
Grabber: 4K HDMI to USB Grabber
Splitter: FeinTech VMS04201
Leider lassen sich die LED's nicht ansteuern (einige LED's leuchten durchgehend, aber es ändert sich nichts). Angeschlossen habe ich diese am PI wie folgt:
GPIO Pin 6 = GND
GPIO Pin 19 = SI
GPIO Pin 23 = CK
Ebenfalls natürlich zusätzlich an einem 5V Netzteil angeschlossen.
Über Hyperion Web Konfiguration kann ich mir das Bild Live anzeigen lassen, allerdings lassen Sich weder über die Effekte, noch über den Grabber direkt die LED's ansteuern.
Habe ich die LED's falsch angeklemmt oder muss ich zusätzlich noch etwas in der Web Konfiguration einstellen?
LOG:
Code
2022-12-29T13:26:21.958Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:97:handleCompStateChangeRequest()) Disable Hyperion, store current component states
2022-12-29T13:26:21.958Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Hyperion: disabled
2022-12-29T13:26:21.958Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Smoothing: disabled
2022-12-29T13:26:21.958Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Blackborder detector: disabled
2022-12-29T13:26:21.959Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Framegrabber: disabled
2022-12-29T13:26:21.959Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) V4L capture device: disabled
2022-12-29T13:26:21.971Z [V4L2] (INFO) Stopped
2022-12-29T13:26:21.959Z [LEDDEVICE|First LED Hardware instance] (DEBUG) (LedDevice.cpp:189:disable()) Disable device ws2801'
2022-12-29T13:26:21.960Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2801 OFF
2022-12-29T13:26:21.960Z [LEDDEVICE|First LED Hardware instance] (DEBUG) (LedDevice.cpp:471:powerOff()) Power Off: ws2801
2022-12-29T13:26:21.960Z [LEDDEVICE|First LED Hardware instance] (DEBUG) (LedDevice.cpp:368:writeBlack()) Set LED strip to black to switch of LEDs
2022-12-29T13:26:21.964Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2801 is OFF
2022-12-29T13:26:21.965Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) LED device: disabled
2022-12-29T13:26:22.209Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:359:updatePriorities()) Removed source priority 240
2022-12-29T13:26:22.209Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:359:updatePriorities()) Removed source priority 250
2022-12-29T13:26:22.209Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:422:updatePriorities()) Set visible priority to 255
2022-12-29T13:26:22.210Z [HYPERION|First LED Hardware instance] (DEBUG) (Hyperion.cpp:628:handleSourceAvailability()) No source left -> Pause output processing and switch LED-Device off
2022-12-29T13:26:25.609Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:114:handleCompStateChangeRequest()) Enable Hyperion, recover previous component states
2022-12-29T13:26:25.610Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Hyperion: enabled
2022-12-29T13:26:25.610Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Smoothing: enabled
2022-12-29T13:26:25.610Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Blackborder detector: enabled
2022-12-29T13:26:25.610Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:178:registerInput()) Register new input 'System/GRABBER' () with priority 250 as inactive
2022-12-29T13:26:25.611Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) Framegrabber: enabled
2022-12-29T13:26:25.611Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:178:registerInput()) Register new input 'System/V4L' () with priority 240 as inactive
2022-12-29T13:26:25.611Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) V4L capture device: enabled
2022-12-29T13:26:25.850Z [V4L2] (DEBUG) (V4L2Grabber.cpp:152:init()) Set device (path) to: usb video: usb video (/dev/video0)
2022-12-29T13:26:25.850Z [V4L2] (DEBUG) (V4L2Grabber.cpp:489:init_device()) Set device input to: Camera 1
2022-12-29T13:26:25.851Z [V4L2] (DEBUG) (V4L2Grabber.cpp:615:init_device()) Set resolution to width=1920 height=1080
2022-12-29T13:26:25.853Z [V4L2] (DEBUG) (V4L2Grabber.cpp:632:init_device()) Set framerate to 5 fps
2022-12-29T13:26:25.853Z [V4L2] (DEBUG) (V4L2Grabber.cpp:708:init_device()) Pixel format=YUYV
2022-12-29T13:26:25.918Z [V4L2] (INFO) Started
2022-12-29T13:26:25.918Z [V4L2] (DEBUG) (GrabberWrapper.cpp:62:start()) Grabber start()
2022-12-29T13:26:25.611Z [LEDDEVICE|First LED Hardware instance] (DEBUG) (LedDevice.cpp:135:enable()) Enable device ws2801'
2022-12-29T13:26:25.612Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2801 ON
2022-12-29T13:26:25.612Z [LEDDEVICE|First LED Hardware instance] (DEBUG) (LedDevice.cpp:485:powerOn()) Power On: ws2801
2022-12-29T13:26:25.613Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2801 is ON
2022-12-29T13:26:25.613Z [LEDDEVICE|First LED Hardware instance] (INFO) LedDevice 'ws2801' enabled
2022-12-29T13:26:25.614Z [COMPONENTREG|First LED Hardware instance] (DEBUG) (ComponentRegister.cpp:82:setNewComponentState()) LED device: enabled
2022-12-29T13:26:26.537Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:178:registerInput()) Register new input 'System/V4L' (V4L2) with priority 240 as inactive
2022-12-29T13:26:26.537Z [MUXER|First LED Hardware instance] (DEBUG) (PriorityMuxer.cpp:422:updatePriorities()) Set visible priority to 240
2022-12-29T13:26:26.537Z [HYPERION|First LED Hardware instance] (DEBUG) (Hyperion.cpp:637:handleSourceAvailability()) new source available -> Resume output processing and switch LED-Device on
2022-12-29T13:26:26.540Z [LEDDEVICE|First LED Hardware instance] (DEBUG) (LedDevice.cpp:397:switchOn()) Device ws2801 is already on. Skipping.
2022-12-29T13:26:31.174Z [WEBSOCKET] (DEBUG) (JsonAPI.cpp:1197:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.188.48Danke und Gruß
