The right leds do not light up correctly

1. offizieller Beitrag

    I have recently configured hyperion with raspberry pi 3

    I have used many different capture devices even ones which support high fps


    I have installed capacitor and logic converter


    Yet still same issues


    When i play any video for example when i play


    Externer Inhalt youtu.be
    Inhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.
    Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.


    This video none of the leds lighr up when its on the edge and only top bottom and left light up if the whole screen is lit up


    I dont understand what i am doing wrong or what i have to change within settings

    I have attached images of my screen you can see the issues


    I have also attached my settings

    LED Typ, PSU, wirering

    1280x720 60 FPS, NV12 is too much for RPI, and also not necessary!

    Screenshot of your LED layout.


    Your pictures are not suitable for an assessment of your problem!


    Something is still wrong, compare your picture with mine.


    regards pclin

    Hi this is my layout

    Psu is a 12v led driver

    WS2811 leds 12v

    Very short wiring

    Einmal editiert, zuletzt von Gok.tk () aus folgendem Grund: Merged a post created by Gok.tk into this post.

    So if top has 70 leds how will i calculate it and yes each strip has 3 leds


    What will i put on top instead of 70


    Thanks

    I divided them by 3 now the edged display but its in thw wrong location


    No matter what starting position i put it in does not fix it

    Einmal editiert, zuletzt von Gok.tk () aus folgendem Grund: Merged a post created by Gok.tk into this post.

    count the leds on every side and divide by 3.

    Each side should be equal amount

    Each side divide by 3

    No gaps and every setting default to start with


    Then be sure the led start position is correct AND the reverse direction option.

    Leds should be placed clockwise, if not from your view mark that setting and save.

    Done that solved it thank you i just dont understand why it was not doing each individually so does this mean each 3 will omly.light up and display the house same colour all together and not separately


    May i also ask how i can make the leds more brighter

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden