Displays boot colours then hangs

  • TPmodding

    Hat das Thema freigeschaltet.
  • How to help you with the information?

    OS, Grabber, Debug log.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

    • Offizieller Beitrag

    Grabber?

    Live Video in Hyperion?


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • Yes grabber is working I can see the screen capture in Hyperion and what the leds are supposed to be doing but the leds are stuck on the boot effects


    The leds have frozen though like half way through the effect

    Einmal editiert, zuletzt von Franky118 () aus folgendem Grund: Merged a post created by Franky118 into this post.

  • Common ground?


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • I already had the ground connected thanks for replying though

    It is strange though how it’s flickering as the data wire from the pic is only about 10cm long and it flickers crazy amount the length of the leds is nearly 3m in total so that’s why I’m assuming I need a logic level shifter

  • Although level shifter makes sense for many LED types, it has nothing to do with flickering.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • you have only 92 leds and running PWM0 on GPIO18


    Audio = off in settings with dtparam=audio=off



    So PSU has to be powerfull enough, what kind of ledstrip and PSU you have?


    Try rewritetime setting on 6000 at ledcontroller section, dma at 5


    I read that you have 30leds/mtr.

    With that length you should power the ledstrip with the connector AND white and red power cables


    Also at the end power the ledstrip on GND and +

    Einmal editiert, zuletzt von Ambientheater77 () aus folgendem Grund: Merged a post created by Lightning-guy77 into this post.

  • tip: use more GND pins on the Raspi, at least 2 of them


    So I’m running ws2811 leds 60/m so obviously more leds so 92 pixels

    You stated: ledstrip is little less then 3 meters long.


    in your config you addressed 92 leds.

    That makes in my book 32 or 30 leds/meter.

    Einmal editiert, zuletzt von Ambientheater77 () aus folgendem Grund: Merged a post created by Lightning-guy77 into this post.

  • You have the ws2811 12volt ledstrip.


    Leds (pixels) is only addressed by segments of 3 so you have to count the leds on each side and divide the number by 3



    Total leds into Hyperion can not be more then 60

    If you have a ledstrip of almost 3 meters with 60leds/mtr


    Goodluck.

  • I know this already

    total leds is 276 total configured pixels in Hyperion is 30 top and 30 bottom and 16 on left and 16 right so total 92 pixels

    It’s still flickering with 3 ground pins connected although it’s not flickering as much it’s still happening


    Hi do I rewrite the time settings you mentioned

    Einmal editiert, zuletzt von Franky118 () aus folgendem Grund: Merged a post created by Franky118 into this post.


  • Ververs snelheid, increase to 6000ms


    I changed it with APA102 and HD107s ledstrips from 1000 ( default) to 6000 and works fine.


    GND and common ground is okay you say.


    in config.txt be sure there's only one line with audio option, change/alter that one

    so:


    dtparam=audio=on (delete or change to =off AND remove the #

    then save it and reboot.



    still doesn't work? connect to GPIO19 PWM1 and or change DMA settings from 10 to 5


    With that length you should power the ledstrip with the connector AND white and red power cables


    Also at the end power the ledstrip on GND and +

    also do this above, i have 260 leds and even injected power in the middle of the ledstrip

    2 Mal editiert, zuletzt von Ambientheater77 () aus folgendem Grund: Merged a post created by Lightning-guy77 into this post.

  • So Ive tried other gpio pins and none of them are working so Ive come to the conclusion that the pic itself is faulty,

    I bought it second hand from eBay

    I’m going to get another pic and maybe a new set of leds also

    Thanks for the help guys much appreciated

  • Ok so Ive replaced the raspberry pi and it’s a lot better now it’s basically working now apart from the odd flash of like rainbow colours every ten seconds or so


    I’ve soldered the data line to gpio 18 and have 3 grounds connected also which are not soldered

    What is causing the random flashes

    2 Mal editiert, zuletzt von Franky118 () aus folgendem Grund: Merged a post created by Franky118 into this post.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!