booting with video capture

Hello everyone,

ive done my second hyperion project in 12 years as a absolut noobie. Everything is working fine, but i think hyperion cant connect to my capture device after booting. To run the leds, i need to switch USB capture in the WebUi off and on. do i need another splitter/grabber combination? this ist my actual -->

TenYua Capture Camcorder Aufnahme Streaming

i hope you can help me 🙈

friendly regards!

2025-01-08T22:57:48.182Z [EFFECTFILES] (INFO) 41 effects loaded from directory :/effects/
2025-01-08T22:57:48.342Z [EFFECTFILES] (INFO) 23 effect schemas loaded from directory :/effects/schema/
2025-01-08T22:57:48.362Z [EFFECTFILES] (INFO) 0 effects loaded from directory /home/hyperion/.hyperion/custom-effects/
2025-01-08T22:57:49.279Z [V4L2] (INFO) Set image size decimation to 1
2025-01-08T22:57:49.313Z [V4L2] (INFO) Set flipmode to NO_CHANGE
2025-01-08T22:57:49.315Z [V4L2] (INFO) Set new frames per second to: 30 fps
2025-01-08T22:57:49.328Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video14' error code 13, Permission denied
2025-01-08T22:57:49.350Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video22' error code 13, Permission denied
2025-01-08T22:57:49.351Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video12' error code 13, Permission denied
2025-01-08T22:57:49.371Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video20' error code 13, Permission denied
2025-01-08T22:57:49.392Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video1' error code 13, Permission denied
2025-01-08T22:57:49.394Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video10' error code 13, Permission denied
2025-01-08T22:57:49.400Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video15' error code 13, Permission denied
2025-01-08T22:57:49.401Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video23' error code 13, Permission denied
2025-01-08T22:57:49.427Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video13' error code 13, Permission denied
2025-01-08T22:57:49.428Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video31' error code 13, Permission denied
2025-01-08T22:57:49.429Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video21' error code 13, Permission denied
2025-01-08T22:57:49.431Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video11' error code 13, Permission denied
2025-01-08T22:57:49.432Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video0' error code 13, Permission denied
2025-01-08T22:57:49.448Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video18' error code 13, Permission denied
2025-01-08T22:57:49.449Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video16' error code 13, Permission denied
2025-01-08T22:57:49.622Z [EVENTS-SCHED] (INFO) Disabling event scheduler
2025-01-08T22:57:49.806Z [DAEMON] (INFO) CEC event handler created
2025-01-08T22:57:49.336Z [LEDDEVICE|First LED Hardware instance] (INFO) Start LedDevice 'ws2801'.
2025-01-08T22:57:49.359Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2801 ON
2025-01-08T22:57:49.359Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2801 is ON
2025-01-08T22:57:49.360Z [LEDDEVICE|First LED Hardware instance] (INFO) LedDevice 'ws2801' enabled
2025-01-08T22:57:49.418Z [EFFECTENGINE|First LED Hardware instance] (INFO) Run effect "Rainbow swirl" on channel 1
2025-01-08T22:57:49.540Z [FLATBUFSERVER] (INFO) Started on port 19400
2025-01-08T22:57:49.557Z [PROTOSERVER] (INFO) Started on port 19445
2025-01-08T22:57:49.594Z [HYPERION|First LED Hardware instance] (INFO) Initial foreground effect 'Rainbow swirl' started
2025-01-08T22:57:49.843Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video14' error code 13, Permission denied
2025-01-08T22:57:49.849Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video22' error code 13, Permission denied
2025-01-08T22:57:49.855Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video12' error code 13, Permission denied
2025-01-08T22:57:49.858Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video20' error code 13, Permission denied
2025-01-08T22:57:49.859Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video1' error code 13, Permission denied
2025-01-08T22:57:49.887Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video10' error code 13, Permission denied
2025-01-08T22:57:49.905Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video15' error code 13, Permission denied
2025-01-08T22:57:49.914Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video23' error code 13, Permission denied
2025-01-08T22:57:49.945Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video13' error code 13, Permission denied
2025-01-08T22:57:49.958Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video31' error code 13, Permission denied
2025-01-08T22:57:49.963Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video21' error code 13, Permission denied
2025-01-08T22:57:49.995Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video11' error code 13, Permission denied
2025-01-08T22:57:49.999Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video0' error code 13, Permission denied
2025-01-08T22:57:50.002Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video18' error code 13, Permission denied
2025-01-08T22:57:50.005Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video16' error code 13, Permission denied
2025-01-08T22:57:50.008Z [HYPERION-INSTMGR] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2025-01-08T22:57:50.286Z [JSONSERVER] (INFO) Started on port 19444
2025-01-08T22:57:50.393Z [EVENTS-CEC] (INFO) CEC handler disabled
2025-01-08T22:57:52.704Z [WEBSERVER] (INFO) 'Hyperion http-Webserver' started on port 8090
2025-01-08T22:57:53.096Z [WEBSERVER] (INFO) 'Hyperion https-Webserver' started on port 8092
2025-01-08T22:57:55.784Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2801 OFF
2025-01-08T22:57:55.793Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2801 is OFF
2025-01-08T22:57:55.893Z [EFFECTENGINE|First LED Hardware instance] (INFO) Effect [Rainbow swirl] finished

or is it my old Raspberry Pi 1?

_{ahh hallo pclin. Ich habe schon einige Beiträge von dir gelesen... wo kann ich das den einstellen?}

_{Hast du den vielleicht eine Idee was es sein könnte bei meinem Ambilight? Der Grabber hat doch eigentlich einen vernünftigen Chip ---> MS2109? Mittlerweile läuft es irgendwie gar nicht mehr obwohl meine Hyperion Config nichts behindern dürfte, und der Grabber die niedrigsten Anforderungen abgibt MJPEG, 640x480, 10fps...}

Mit freundlichen Grüßen

ok... ive logged in with hyperion, ambientelight, and then typed: sudo usermod -a -G video hyperion, right?

hyperion ist in the video group =( but IT wont Work probably =(

Sometimes it works, sometimes not... fck! what do i wrong?