Sony Android Tv with android grabber

    Hello I have a sony tv with android grabber installed on it.

    the lights are on an esp32 with wled.

    and the server is on rpi5.

    I had the lights working for a while and I changed the router and somehow instead of the lights on the tv working, the lights under my bed started working which are also wled and esp32.

    Since then I remade the coorect ips on android grabber and on the server but the lights wont turn on. I can see wled but i do not get a device discovered for the android grabber. If i turn on the android grabber and I restart the server I see the rainbow and when the server is on they get off again.

    Also i can identify the lights from hyperion server.

    It is just like does not see the screen capture.

    hello.

    You changed the router, after that is doesn't work anymore >> so problem is probably caused bij LAN problems.

    check IP adres of your TV / Wled and make them static BIND > in router bind MAC to DHCP IP adres.

    Make sure after that you can reach Wled esp32 with the app from Aiircookie >> SWLED on Github

    as last, in Wled app, go to settings and delete Mdns adres in the IP section of the esp32 ( you don't need that)

    also set FPS to 25 frames in Wled

    Use the wizard for Wled again in Hyperion

    give Hyperion the "server" a new IP adres and BIND it as step 1

    Open the android grabber and connect.

    if not, then open router settings and make sure port 19445 PROTO is "open" to/from hyperion IP server


    if everything is okay it should work.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login