In other words, how to sync a smart ceiling projector to hyperion and existing leds?
Hope I don't need to solder anything because I've been able to avoid it so far haha.
is there a Galaxy Light out there that I can sync with my current Hyperion instance?
-
Him -
October 22, 2025 at 8:49 PM -
Thread is Resolved
- Go to Best Answer
-
i would advice using Tuya/Zigbee and home assistant myself, start with a Smarthub and enroll that and the smart ceiling projector onto that with help of the Smartlife app.
thats step one.
thats said, its possible to steer Philips HUE lights with Hyperion.NG, i have that in my house. The Philips HUE use their own HUB for that though.
Maybe there is a protocol build in Hyperion.NG that can steer your Tuya/zigbee HUB, if there is you can use a separate Instance in Hyperion.NG to program the settings to the smartHUB
eg:
Ik heb dit zojuist gevonden op AliExpress:
€20,19 | Tuya ZigBee 3.0 Smart Hub, draadloze/bekabelde gatewaybrug voor app-spraakafstandsbediening, werkt met Alexa Google Home Assistant
€20,19 | Tuya ZigBee 3.0 Smart Hub, draadloze/bekabelde gatewaybrug voor app-spraakafstandsbediening, werkt met Alexa Google Home Assistant€20,19 | Tuya ZigBee 3.0 Smart Hub, draadloze/bekabelde gatewaybrug voor app-spraakafstandsbediening, werkt met Alexa Google Home Assistanta.aliexpress.comor ask the developers
-
- Official Post
Hyperion has no direct Tuya protocol support.
But if you connect the device to HomeAssistant, Hyperion is able to send to HA. As suggested by Ambient_theater77,
Go and try the HA route.
If the device has Wifi, you should be able to connect directly to HA
-
Thanks this sounds promising. First, what is home assistant?
I see Home Assistant is a phone app that I have to learn how to set up. So the next step is to get a wifi powered Tuya projector . I will probably get this one
Tuya WiFi intelligent high-definition starry sky projector intelligent voice control system APP adjustment projector home gifts - AliExpress 39Smarter Shopping, Better Living! Aliexpress.comwww.aliexpress.com -
home assistant is Linux based en you can run that with a Thinclient pc or with raspberry PI or other ways.
its a server, that can connect a lot of different Home Automation IP based devices in your home. Mostly you connect to a HUB with Home Assistant setups.
what Lord-Grey mentioned;
if the device is WIFI based (no Tuya/Zigbee) then you can connect the device directly to Home Assistant.
Home Assistant will automatically scan your IP network for new devices, as soon as they will be activated on your WiFi (or LAN) it detects automatically in a popup..
normally you log in on HA server with url:
example: 192.168.1.1:8123
8123 is default portnumber
-
- Best Answer
yes.
1] ceiling projector type with tuya/zigbee, then need a smart HUB and Smartlife app to connect to HA
(there's also other ways but this is the easiest way for you with tuya/zigbee devices)
2] ceiling projector type with Wi-Fi then you don't need a smart HUB or Smartlife app to connect to HA
(the WiFi type is the easiest device for you, you only need the ceiling projector)
just check the AliExpress/Amazon and see what type you want
-
Thanks
-
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!