Hello
my idea is to run hyperion on android device with usb hdmi grabber.
Will it be possible with no SPI and only forward data to extensions?
Any ideas how to compile/port to android?
Hope somebody have advice to start with.
Thanks and best regards
Hello
my idea is to run hyperion on android device with usb hdmi grabber.
Will it be possible with no SPI and only forward data to extensions?
Any ideas how to compile/port to android?
Hope somebody have advice to start with.
Thanks and best regards
Hello
first thanks for this extension.
But how could i change brightness for effects? In colour whell mode it works. Running Hyperion Remote on Android.
Thanks
you have to change the brightness in hyperion
Gut, das geht mit dem Rapsberry und einem ESP8266 oder mit zwei ESP, danke.
Hey guys, I could bring my D1 with WS2801 up and running very easy.
But unfortunately, I can not controll the ES8266 after a few minutes with the App anymore (the controller still controlls the LEDs) and I have to reeboot it then.
Any idear where to start on this to troubleshoot it?
Also, how can I import other effects to this?
I just find manuals for the Raspberry
Use WLED : https://github.com/Aircoookie/WLED
Full LED control you have by udpe131
Just to give you a feedback: I just checked WLED about Christmas, there was no W2801 support, so I ignored it.
Since February there is W2801 support!
It is 100% what I am looking for!
Thanks Ktosiu!
i would recommend udpraw instead of udpe131, some users have sometimes issues with that...
and ws2801 was in the code, but you had to compile it yourself...i also added lpd8806
If you have multple instances of hyperion you will need to forward the grabbers data from the first instance to the others.
Another example for that is found here.
The link is dead. Can somebody told me how to start/autostart the second instance?
The link is dead. Can somebody told me how to start/autostart the second instance?
Yeah I would know too
Hi all,
I've been following this project closely and love the expansion Hyperion has seen due to countless hours by many. The only issue I'm struggling to understand (and this is probably due to lack of experience with Hyperion). I'm trying to work out if I can select just a portion of the screen to be grabbed and sent to two ESP8266 located on either side of the bed. Basically, I have WS2812 strips on either side of the bed and I would like them to represent the colours captured from the bottom of the screen for their respective sides. So if the bottom left of the TV is blue I would like the left side of the bed to be blue. Is this something that is possible or anyone had experience with achieving?
Thanks!
Just create two instances in hyperion, one for left, one for right and define the corresponding Ledlayout per each.
I was encounter few errors, when trying to compile for Wemos D1 Mini. I was using:
Arduino IDE 1.8.19
esp8266 v.3.0.2
ArduinoThread 2.1.1
ArduinoJSON 6.18.5
LinkedList 1.3.2
FastLED 3.4.0
To resolve problem with compilation I must do two changes.
1. File BaseHeader.h
add line:
right before #endif
2. File ConfigStructures.h
right before the line:
#include <FastLED.h>
add line:
With this two modification I was able to compile and upload the code to Wemos D1 Mini.
Hi, I know this is an old thread and yes, I have brought it back to life but after following the instructions, when I try and download the SciLor / Arduino-logging-library, theres no ZIP to download.
does anyone still have it or can offer me a work around?
Thanks
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!