LEDs leuchten nicht

Mike72 · Apr 13th 2019

Oben 3 LEDs, links, rechts, unten 0.
Wenn alles mit der Config stimmt müsste zumindest einmal der Starteffekt (Rainbow) kommen.

franzli · Apr 13th 2019

Danke euch für die Tipps.
Werde ich morgen mal testen und berichten.

franzli · Apr 14th 2019

so, stimmt das so, bevor ich es anschliesse:

Mambojambo · Apr 14th 2019

Quote from franzli

so, stimmt das so, bevor ich es anschliesse:

Sieht gut aus. Aber nicht mehr als 5V, sonst gibt es Schäden.

franzli · Apr 14th 2019

Passt, habe es auf genau 5v eingestellt.
Dann verbinde ich jetzt alles und berichte.

franzli · Apr 14th 2019

passt da alles?:

"installierenhyperion"

SSH Traffic:
ssh connected
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2019-04-14 10:27:46 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh out: debconf: unable to initialize frontend: Dialog
ssh out: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh out: debconf: falling back to frontend: Readline
ssh out: debconf: unable to initialize frontend: Readline
ssh out: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 21.)
ssh out: debconf: falling back to frontend: Teletype
ssh out: dpkg-preconfigure: unable to re-open stdin:
ssh in: Selecting previously unselected package fontconfig.
ssh in: (Reading database ...
ssh in: (Reading database ... 5%
ssh in: (Reading database ... 10%
ssh in: (Reading database ... 15%
ssh in: (Reading database ... 20%
ssh in: (Reading database ... 25%
ssh in: (Reading database ... 30%
ssh in: (Reading database ... 35%
ssh in: (Reading database ... 40%
ssh in: (Reading database ... 45%
ssh in: (Reading database ... 50%
ssh in: (Reading database ... 55%
ssh in: (Reading database ... 60%
ssh in: (Reading database ... 65%
ssh in: (Reading database ... 70%
ssh in: (Reading database ... 75%
ssh in: (Reading database ... 80%
ssh in: (Reading database ... 85%
ssh in: (Reading database ... 90%
ssh in: (Reading database ... 95%
ssh in: (Reading database ... 100%
ssh in: (Reading database ... 23428 files and directories currently installed.)
ssh in: Preparing to unpack .../00-fontconfig_2.11.0-6.7+b1_armhf.deb ...
ssh in: Unpacking fontconfig (2.11.0-6.7+b1) ...
ssh in: Selecting previously unselected package libxau6:armhf.
ssh in: Preparing to unpack .../01-libxau6_1%3a1.0.8-1_armhf.deb ...
ssh in: Unpacking libxau6:armhf (1:1.0.8-1) ...
ssh in: Selecting previously unselected package x11-common.
ssh in: Preparing to unpack .../02-x11-common_1%3a7.7+19_all.deb ...
ssh in: Unpacking x11-common (1:7.7+19) ...
ssh in: Selecting previously unselected package libice6:armhf.
ssh in: Preparing to unpack .../03-libice6_2%3a1.0.9-2_armhf.deb ...
ssh in: Unpacking libice6:armhf (2:1.0.9-2) ...
ssh in: Selecting previously unselected package libsm6:armhf.
ssh in: Preparing to unpack .../04-libsm6_2%3a1.2.2-1+b3_armhf.deb ...
ssh in: Unpacking libsm6:armhf (2:1.2.2-1+b3) ...
ssh in: Selecting previously unselected package libxdmcp6:armhf.
ssh in: Preparing to unpack .../05-libxdmcp6_1%3a1.1.2-3_armhf.deb ...
ssh in: Unpacking libxdmcp6:armhf (1:1.1.2-3) ...
ssh in: Selecting previously unselected package libxcb1:armhf.
ssh in: Preparing to unpack .../06-libxcb1_1.12-1_armhf.deb ...
ssh in: Unpacking libxcb1:armhf (1.12-1) ...
ssh in: Selecting previously unselected package libx11-data.
ssh in: Preparing to unpack .../07-libx11-data_2%3a1.6.4-3+deb9u1_all.deb ...
ssh in: Unpacking libx11-data (2:1.6.4-3+deb9u1) ...
ssh in: Selecting previously unselected package libx11-6:armhf.
ssh in: Preparing to unpack .../08-libx11-6_2%3a1.6.4-3+deb9u1_armhf.deb ...
ssh in: Unpacking libx11-6:armhf (2:1.6.4-3+deb9u1) ...
ssh in: Selecting previously unselected package libxt6:armhf.
ssh in: Preparing to unpack .../09-libxt6_1%3a1.1.5-1_armhf.deb ...
ssh in: Unpacking libxt6:armhf (1:1.1.5-1) ...
ssh in: Selecting previously unselected package libaudio2:armhf.
ssh in: Preparing to unpack .../10-libaudio2_1.9.4-5+b1_armhf.deb ...
ssh in: Unpacking libaudio2:armhf (1.9.4-5+b1) ...
ssh in: Selecting previously unselected package libmng1:armhf.
ssh in: Preparing to unpack .../11-libmng1_1.0.10+dfsg-3.1+b5_armhf.deb ...
ssh in: Unpacking libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
ssh in: Selecting previously unselected package qtcore4-l10n.
ssh in: Preparing to unpack .../12-qtcore4-l10n_4%3a4.8.7+dfsg-11_all.deb ...
ssh in: Unpacking qtcore4-l10n (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqtcore4:armhf.
ssh in: Preparing to unpack .../13-libqtcore4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtcore4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqt4-xml:armhf.
ssh in: Preparing to unpack .../14-libqt4-xml_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqtdbus4:armhf.
ssh in: Preparing to unpack .../15-libqtdbus4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqt4-network:armhf.
ssh in: Preparing to unpack .../16-libqt4-network_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqt4-network:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libxext6:armhf.
ssh in: Preparing to unpack .../17-libxext6_2%3a1.3.3-1+b2_armhf.deb ...
ssh in: Unpacking libxext6:armhf (2:1.3.3-1+b2) ...
ssh in: Selecting previously unselected package libxrender1:armhf.
ssh in: Preparing to unpack .../18-libxrender1_1%3a0.9.10-1_armhf.deb ...
ssh in: Unpacking libxrender1:armhf (1:0.9.10-1) ...
ssh in: Selecting previously unselected package libqtgui4:armhf.
ssh in: Preparing to unpack .../19-libqtgui4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtgui4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libusb-1.0-0:armhf.
ssh in: Preparing to unpack .../20-libusb-1.0-0_2%3a1.0.21-1_armhf.deb ...
ssh in: Unpacking libusb-1.0-0:armhf (2:1.0.21-1) ...
ssh in: Setting up libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
ssh in: Setting up qtcore4-l10n (4:4.8.7+dfsg-11) ...
ssh in: Setting up libusb-1.0-0:armhf (2:1.0.21-1) ...
ssh in: Processing triggers for libc-bin (2.24-11+deb9u3) ...
ssh in: Setting up libqtcore4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Processing triggers for systemd (232-25+deb9u6) ...
ssh in: Setting up libxdmcp6:armhf (1:1.1.2-3) ...
ssh in: Setting up x11-common (1:7.7+19) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: line 13: update-rc.d: command not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: Setting up libx11-data (2:1.6.4-3+deb9u1) ...
ssh in: Setting up libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxau6:armhf (1:1.0.8-1) ...
ssh in: Setting up fontconfig (2.11.0-6.7+b1) ...
ssh in: Regenerating fonts cache... done.
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxcb1:armhf (1.12-1) ...
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libx11-6:armhf (2:1.6.4-3+deb9u1) ...
ssh in: Setting up libxrender1:armhf (1:0.9.10-1) ...
ssh in: Setting up libqt4-network:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxext6:armhf (2:1.3.3-1+b2) ...
ssh in: Processing triggers for libc-bin (2.24-11+deb9u3) ...
ssh in: Processing triggers for systemd (232-25+deb9u6) ...
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libsm6:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Raspberry Pi found, but SPI is not set, we write "dtparam=spi=on" to /boot/config.txt
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2019-04-14 10:28:58 URL:https://kent.dl.sourceforge.ne…/hyperion_rpi_osmc.tar.gz [1640849/1640849] -> "-" [1]
ssh in: ---> Installing systemd script
ssh out: Created symlink /etc/systemd/system/multi-user.target.wants/hyperion.service ￢ﾆﾒ /etc/systemd/system/hyperion.service.
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh in: Rebooting now, we added dtparam=spi=on to config.txt

Mike72 · Apr 14th 2019

Vlt hab' ich schon 'nen Sehfehler, aber...

PIN 19 auf DI !!! bei dir gelb
PIN 23 auf CI !!! bei dir grün

franzli · Apr 14th 2019

Quote from Mike72

Vlt hab' ich schon 'nen Sehfehler, aber...

PIN 19 auf DI !!! bei dir gelb
PIN 23 auf CI !!! bei dir grün

was meinst Du damit?muss ich was ändern?

"test"

SSH Traffic:
ssh connected
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2019-04-14 10:27:46 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh out: debconf: unable to initialize frontend: Dialog
ssh out: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh out: debconf: falling back to frontend: Readline
ssh out: debconf: unable to initialize frontend: Readline
ssh out: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 21.)
ssh out: debconf: falling back to frontend: Teletype
ssh out: dpkg-preconfigure: unable to re-open stdin:
ssh in: Selecting previously unselected package fontconfig.
ssh in: (Reading database ...
ssh in: (Reading database ... 5%
ssh in: (Reading database ... 10%
ssh in: (Reading database ... 15%
ssh in: (Reading database ... 20%
ssh in: (Reading database ... 25%
ssh in: (Reading database ... 30%
ssh in: (Reading database ... 35%
ssh in: (Reading database ... 40%
ssh in: (Reading database ... 45%
ssh in: (Reading database ... 50%
ssh in: (Reading database ... 55%
ssh in: (Reading database ... 60%
ssh in: (Reading database ... 65%
ssh in: (Reading database ... 70%
ssh in: (Reading database ... 75%
ssh in: (Reading database ... 80%
ssh in: (Reading database ... 85%
ssh in: (Reading database ... 90%
ssh in: (Reading database ... 95%
ssh in: (Reading database ... 100%
ssh in: (Reading database ... 23428 files and directories currently installed.)
ssh in: Preparing to unpack .../00-fontconfig_2.11.0-6.7+b1_armhf.deb ...
ssh in: Unpacking fontconfig (2.11.0-6.7+b1) ...
ssh in: Selecting previously unselected package libxau6:armhf.
ssh in: Preparing to unpack .../01-libxau6_1%3a1.0.8-1_armhf.deb ...
ssh in: Unpacking libxau6:armhf (1:1.0.8-1) ...
ssh in: Selecting previously unselected package x11-common.
ssh in: Preparing to unpack .../02-x11-common_1%3a7.7+19_all.deb ...
ssh in: Unpacking x11-common (1:7.7+19) ...
ssh in: Selecting previously unselected package libice6:armhf.
ssh in: Preparing to unpack .../03-libice6_2%3a1.0.9-2_armhf.deb ...
ssh in: Unpacking libice6:armhf (2:1.0.9-2) ...
ssh in: Selecting previously unselected package libsm6:armhf.
ssh in: Preparing to unpack .../04-libsm6_2%3a1.2.2-1+b3_armhf.deb ...
ssh in: Unpacking libsm6:armhf (2:1.2.2-1+b3) ...
ssh in: Selecting previously unselected package libxdmcp6:armhf.
ssh in: Preparing to unpack .../05-libxdmcp6_1%3a1.1.2-3_armhf.deb ...
ssh in: Unpacking libxdmcp6:armhf (1:1.1.2-3) ...
ssh in: Selecting previously unselected package libxcb1:armhf.
ssh in: Preparing to unpack .../06-libxcb1_1.12-1_armhf.deb ...
ssh in: Unpacking libxcb1:armhf (1.12-1) ...
ssh in: Selecting previously unselected package libx11-data.
ssh in: Preparing to unpack .../07-libx11-data_2%3a1.6.4-3+deb9u1_all.deb ...
ssh in: Unpacking libx11-data (2:1.6.4-3+deb9u1) ...
ssh in: Selecting previously unselected package libx11-6:armhf.
ssh in: Preparing to unpack .../08-libx11-6_2%3a1.6.4-3+deb9u1_armhf.deb ...
ssh in: Unpacking libx11-6:armhf (2:1.6.4-3+deb9u1) ...
ssh in: Selecting previously unselected package libxt6:armhf.
ssh in: Preparing to unpack .../09-libxt6_1%3a1.1.5-1_armhf.deb ...
ssh in: Unpacking libxt6:armhf (1:1.1.5-1) ...
ssh in: Selecting previously unselected package libaudio2:armhf.
ssh in: Preparing to unpack .../10-libaudio2_1.9.4-5+b1_armhf.deb ...
ssh in: Unpacking libaudio2:armhf (1.9.4-5+b1) ...
ssh in: Selecting previously unselected package libmng1:armhf.
ssh in: Preparing to unpack .../11-libmng1_1.0.10+dfsg-3.1+b5_armhf.deb ...
ssh in: Unpacking libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
ssh in: Selecting previously unselected package qtcore4-l10n.
ssh in: Preparing to unpack .../12-qtcore4-l10n_4%3a4.8.7+dfsg-11_all.deb ...
ssh in: Unpacking qtcore4-l10n (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqtcore4:armhf.
ssh in: Preparing to unpack .../13-libqtcore4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtcore4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqt4-xml:armhf.
ssh in: Preparing to unpack .../14-libqt4-xml_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqtdbus4:armhf.
ssh in: Preparing to unpack .../15-libqtdbus4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqt4-network:armhf.
ssh in: Preparing to unpack .../16-libqt4-network_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqt4-network:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libxext6:armhf.
ssh in: Preparing to unpack .../17-libxext6_2%3a1.3.3-1+b2_armhf.deb ...
ssh in: Unpacking libxext6:armhf (2:1.3.3-1+b2) ...
ssh in: Selecting previously unselected package libxrender1:armhf.
ssh in: Preparing to unpack .../18-libxrender1_1%3a0.9.10-1_armhf.deb ...
ssh in: Unpacking libxrender1:armhf (1:0.9.10-1) ...
ssh in: Selecting previously unselected package libqtgui4:armhf.
ssh in: Preparing to unpack .../19-libqtgui4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtgui4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libusb-1.0-0:armhf.
ssh in: Preparing to unpack .../20-libusb-1.0-0_2%3a1.0.21-1_armhf.deb ...
ssh in: Unpacking libusb-1.0-0:armhf (2:1.0.21-1) ...
ssh in: Setting up libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
ssh in: Setting up qtcore4-l10n (4:4.8.7+dfsg-11) ...
ssh in: Setting up libusb-1.0-0:armhf (2:1.0.21-1) ...
ssh in: Processing triggers for libc-bin (2.24-11+deb9u3) ...
ssh in: Setting up libqtcore4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Processing triggers for systemd (232-25+deb9u6) ...
ssh in: Setting up libxdmcp6:armhf (1:1.1.2-3) ...
ssh in: Setting up x11-common (1:7.7+19) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: line 13: update-rc.d: command not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: Setting up libx11-data (2:1.6.4-3+deb9u1) ...
ssh in: Setting up libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxau6:armhf (1:1.0.8-1) ...
ssh in: Setting up fontconfig (2.11.0-6.7+b1) ...
ssh in: Regenerating fonts cache... done.
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxcb1:armhf (1.12-1) ...
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libx11-6:armhf (2:1.6.4-3+deb9u1) ...
ssh in: Setting up libxrender1:armhf (1:0.9.10-1) ...
ssh in: Setting up libqt4-network:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxext6:armhf (2:1.3.3-1+b2) ...
ssh in: Processing triggers for libc-bin (2.24-11+deb9u3) ...
ssh in: Processing triggers for systemd (232-25+deb9u6) ...
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libsm6:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Raspberry Pi found, but SPI is not set, we write "dtparam=spi=on" to /boot/config.txt
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2019-04-14 10:28:58 URL:https://kent.dl.sourceforge.ne…/hyperion_rpi_osmc.tar.gz [1640849/1640849] -> "-" [1]
ssh in: ---> Installing systemd script
ssh out: Created symlink /etc/systemd/system/multi-user.target.wants/hyperion.service ￢ﾆﾒ /etc/systemd/system/hyperion.service.
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh in: Rebooting now, we added dtparam=spi=on to config.txt
ssh disconnected
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Sun 2019-04-14 10:29:03 CEST, end at Sun 2019-04-14 10:45:24 CEST. --
ssh in: Apr 14 10:29:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: Hyperion Ambilight Deamon (313)
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: ERROR: No valid config found
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: Hyperion Ambilight Deamon (422)
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: ERROR: No valid config found
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: Hyperion Ambilight Deamon (424)
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: ERROR: No valid config found
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: Hyperion Ambilight Deamon (427)
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: ERROR: No valid config found
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: Hyperion Ambilight Deamon (429)
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: ERROR: No valid config found
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:08 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Start request repeated too quickly.
ssh in: Apr 14 10:29:08 osmc systemd[1]: Failed to start Hyperion Systemd service.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:45:16 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: Hyperion Ambilight Deamon (1283)
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: {
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "colorOrder" : "rgb",
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "name" : "MyHyperionConfig",
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "rate" : 1000000,
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "type" : "apa102"
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: }
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Creating linear smoothing
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Hyperion started and initialised
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: started
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Json server created and started on port 19444
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Frame grabber created and started
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 10:45:19 osmc hyperiond[1283]: EFFECTENGINE INFO: effect finished

franzli · Apr 14th 2019

nochmals getestet, nix:

"test1"

SSH Traffic:
ssh connected
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2019-04-14 10:27:46 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh out: debconf: unable to initialize frontend: Dialog
ssh out: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh out: debconf: falling back to frontend: Readline
ssh out: debconf: unable to initialize frontend: Readline
ssh out: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 21.)
ssh out: debconf: falling back to frontend: Teletype
ssh out: dpkg-preconfigure: unable to re-open stdin:
ssh in: Selecting previously unselected package fontconfig.
ssh in: (Reading database ...
ssh in: (Reading database ... 5%
ssh in: (Reading database ... 10%
ssh in: (Reading database ... 15%
ssh in: (Reading database ... 20%
ssh in: (Reading database ... 25%
ssh in: (Reading database ... 30%
ssh in: (Reading database ... 35%
ssh in: (Reading database ... 40%
ssh in: (Reading database ... 45%
ssh in: (Reading database ... 50%
ssh in: (Reading database ... 55%
ssh in: (Reading database ... 60%
ssh in: (Reading database ... 65%
ssh in: (Reading database ... 70%
ssh in: (Reading database ... 75%
ssh in: (Reading database ... 80%
ssh in: (Reading database ... 85%
ssh in: (Reading database ... 90%
ssh in: (Reading database ... 95%
ssh in: (Reading database ... 100%
ssh in: (Reading database ... 23428 files and directories currently installed.)
ssh in: Preparing to unpack .../00-fontconfig_2.11.0-6.7+b1_armhf.deb ...
ssh in: Unpacking fontconfig (2.11.0-6.7+b1) ...
ssh in: Selecting previously unselected package libxau6:armhf.
ssh in: Preparing to unpack .../01-libxau6_1%3a1.0.8-1_armhf.deb ...
ssh in: Unpacking libxau6:armhf (1:1.0.8-1) ...
ssh in: Selecting previously unselected package x11-common.
ssh in: Preparing to unpack .../02-x11-common_1%3a7.7+19_all.deb ...
ssh in: Unpacking x11-common (1:7.7+19) ...
ssh in: Selecting previously unselected package libice6:armhf.
ssh in: Preparing to unpack .../03-libice6_2%3a1.0.9-2_armhf.deb ...
ssh in: Unpacking libice6:armhf (2:1.0.9-2) ...
ssh in: Selecting previously unselected package libsm6:armhf.
ssh in: Preparing to unpack .../04-libsm6_2%3a1.2.2-1+b3_armhf.deb ...
ssh in: Unpacking libsm6:armhf (2:1.2.2-1+b3) ...
ssh in: Selecting previously unselected package libxdmcp6:armhf.
ssh in: Preparing to unpack .../05-libxdmcp6_1%3a1.1.2-3_armhf.deb ...
ssh in: Unpacking libxdmcp6:armhf (1:1.1.2-3) ...
ssh in: Selecting previously unselected package libxcb1:armhf.
ssh in: Preparing to unpack .../06-libxcb1_1.12-1_armhf.deb ...
ssh in: Unpacking libxcb1:armhf (1.12-1) ...
ssh in: Selecting previously unselected package libx11-data.
ssh in: Preparing to unpack .../07-libx11-data_2%3a1.6.4-3+deb9u1_all.deb ...
ssh in: Unpacking libx11-data (2:1.6.4-3+deb9u1) ...
ssh in: Selecting previously unselected package libx11-6:armhf.
ssh in: Preparing to unpack .../08-libx11-6_2%3a1.6.4-3+deb9u1_armhf.deb ...
ssh in: Unpacking libx11-6:armhf (2:1.6.4-3+deb9u1) ...
ssh in: Selecting previously unselected package libxt6:armhf.
ssh in: Preparing to unpack .../09-libxt6_1%3a1.1.5-1_armhf.deb ...
ssh in: Unpacking libxt6:armhf (1:1.1.5-1) ...
ssh in: Selecting previously unselected package libaudio2:armhf.
ssh in: Preparing to unpack .../10-libaudio2_1.9.4-5+b1_armhf.deb ...
ssh in: Unpacking libaudio2:armhf (1.9.4-5+b1) ...
ssh in: Selecting previously unselected package libmng1:armhf.
ssh in: Preparing to unpack .../11-libmng1_1.0.10+dfsg-3.1+b5_armhf.deb ...
ssh in: Unpacking libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
ssh in: Selecting previously unselected package qtcore4-l10n.
ssh in: Preparing to unpack .../12-qtcore4-l10n_4%3a4.8.7+dfsg-11_all.deb ...
ssh in: Unpacking qtcore4-l10n (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqtcore4:armhf.
ssh in: Preparing to unpack .../13-libqtcore4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtcore4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqt4-xml:armhf.
ssh in: Preparing to unpack .../14-libqt4-xml_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqtdbus4:armhf.
ssh in: Preparing to unpack .../15-libqtdbus4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libqt4-network:armhf.
ssh in: Preparing to unpack .../16-libqt4-network_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqt4-network:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libxext6:armhf.
ssh in: Preparing to unpack .../17-libxext6_2%3a1.3.3-1+b2_armhf.deb ...
ssh in: Unpacking libxext6:armhf (2:1.3.3-1+b2) ...
ssh in: Selecting previously unselected package libxrender1:armhf.
ssh in: Preparing to unpack .../18-libxrender1_1%3a0.9.10-1_armhf.deb ...
ssh in: Unpacking libxrender1:armhf (1:0.9.10-1) ...
ssh in: Selecting previously unselected package libqtgui4:armhf.
ssh in: Preparing to unpack .../19-libqtgui4_4%3a4.8.7+dfsg-11_armhf.deb ...
ssh in: Unpacking libqtgui4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Selecting previously unselected package libusb-1.0-0:armhf.
ssh in: Preparing to unpack .../20-libusb-1.0-0_2%3a1.0.21-1_armhf.deb ...
ssh in: Unpacking libusb-1.0-0:armhf (2:1.0.21-1) ...
ssh in: Setting up libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
ssh in: Setting up qtcore4-l10n (4:4.8.7+dfsg-11) ...
ssh in: Setting up libusb-1.0-0:armhf (2:1.0.21-1) ...
ssh in: Processing triggers for libc-bin (2.24-11+deb9u3) ...
ssh in: Setting up libqtcore4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Processing triggers for systemd (232-25+deb9u6) ...
ssh in: Setting up libxdmcp6:armhf (1:1.1.2-3) ...
ssh in: Setting up x11-common (1:7.7+19) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: line 13: update-rc.d: command not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: Setting up libx11-data (2:1.6.4-3+deb9u1) ...
ssh in: Setting up libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxau6:armhf (1:1.0.8-1) ...
ssh in: Setting up fontconfig (2.11.0-6.7+b1) ...
ssh in: Regenerating fonts cache... done.
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxcb1:armhf (1.12-1) ...
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libx11-6:armhf (2:1.6.4-3+deb9u1) ...
ssh in: Setting up libxrender1:armhf (1:0.9.10-1) ...
ssh in: Setting up libqt4-network:armhf (4:4.8.7+dfsg-11) ...
ssh in: Setting up libxext6:armhf (2:1.3.3-1+b2) ...
ssh in: Processing triggers for libc-bin (2.24-11+deb9u3) ...
ssh in: Processing triggers for systemd (232-25+deb9u6) ...
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libsm6:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Raspberry Pi found, but SPI is not set, we write "dtparam=spi=on" to /boot/config.txt
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2019-04-14 10:28:58 URL:https://kent.dl.sourceforge.ne…/hyperion_rpi_osmc.tar.gz [1640849/1640849] -> "-" [1]
ssh in: ---> Installing systemd script
ssh out: Created symlink /etc/systemd/system/multi-user.target.wants/hyperion.service ￢ﾆﾒ /etc/systemd/system/hyperion.service.
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh in: Rebooting now, we added dtparam=spi=on to config.txt
ssh disconnected
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Sun 2019-04-14 10:29:03 CEST, end at Sun 2019-04-14 10:45:24 CEST. --
ssh in: Apr 14 10:29:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: Hyperion Ambilight Deamon (313)
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:05 osmc hyperiond[313]: ERROR: No valid config found
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: Hyperion Ambilight Deamon (422)
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:06 osmc hyperiond[422]: ERROR: No valid config found
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: Hyperion Ambilight Deamon (424)
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:06 osmc hyperiond[424]: ERROR: No valid config found
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:06 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: Hyperion Ambilight Deamon (427)
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:07 osmc hyperiond[427]: ERROR: No valid config found
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: Hyperion Ambilight Deamon (429)
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:07 osmc hyperiond[429]: ERROR: No valid config found
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:07 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 14 10:29:08 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Start request repeated too quickly.
ssh in: Apr 14 10:29:08 osmc systemd[1]: Failed to start Hyperion Systemd service.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 14 10:29:08 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 14 10:45:16 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: Hyperion Ambilight Deamon (1283)
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: {
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "colorOrder" : "rgb",
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "name" : "MyHyperionConfig",
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "rate" : 1000000,
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: "type" : "apa102"
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: }
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Creating linear smoothing
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Hyperion started and initialised
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: started
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Json server created and started on port 19444
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: INFO: Frame grabber created and started
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 10:45:16 osmc hyperiond[1283]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 10:45:19 osmc hyperiond[1283]: EFFECTENGINE INFO: effect finished
ssh disconnected
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Thu 2016-11-03 18:16:42 CET, end at Sun 2019-04-14 10:53:25 CEST. --
ssh in: Apr 14 10:29:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: Hyperion Ambilight Deamon (337)
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: {
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: "colorOrder" : "rgb",
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: "name" : "MyHyperionConfig",
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: "rate" : 1000000,
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: "type" : "apa102"
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: }
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: INFO: Creating linear smoothing
ssh in: Apr 14 10:29:05 osmc hyperiond[337]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: INFO: Hyperion started and initialised
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: started
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: INFO: Json server created and started on port 19444
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: INFO: Frame grabber created and started
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 10:29:06 osmc hyperiond[337]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 10:29:09 osmc hyperiond[337]: EFFECTENGINE INFO: effect finished
ssh in: Apr 14 10:53:11 osmc hyperiond[337]: INFO: Application closed with code 0
ssh in: Apr 14 10:53:11 osmc hyperiond[337]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 14 10:53:11 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 14 10:53:11 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 10:53:15 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: Hyperion Ambilight Deamon (972)
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: {
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: "colorOrder" : "rgb",
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: "name" : "MyHyperionConfig",
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: "rate" : 1000000,
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: "type" : "apa102"
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: }
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Creating linear smoothing
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Hyperion started and initialised
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: started
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Json server created and started on port 19444
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: INFO: Frame grabber created and started
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 10:53:15 osmc hyperiond[972]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 10:53:18 osmc hyperiond[972]: EFFECTENGINE INFO: effect finished

franzli · Apr 14th 2019

habe gelb und grün getauscht.

Mike72 · Apr 14th 2019

Nochmal... gaaanz laaangsam...
Nach diesem Schaltplan verdrahten:

franzli · Apr 14th 2019

so:

Mambojambo · Apr 14th 2019

Quote from franzli

so:

Kleiner Tipp zum Löten.

Setze das Lötzinn auf die Stelle die du löten willst und punktiere dann mit dem Kolben, sodass du erstmal einen Lötpunkt an der Stelle hast wo du eine Verbindung herstellen möchtest.
Das abisolierte, verzwirbelte Kabel überziehst du ebenfalls mit Lötzinn.
Wenn 1. und 2. erfüllt sind, dann stellst du die Verbindung her, indem du den Lötpunkt auf dem Streifen mit dem Kolben erwärmst und dann das Kabel in den Lötpunkt schiebst. So hast du kleinere und sauberere Verbindungen.

Ich persönlich verwende am liebsten Lötzinn ohne Blei mit integriertem Flussmittel. Der Schmelzpunkt ist zwar höher, aber ich finde es lässt sich einfacher verarbeiten.

Arakon · Apr 14th 2019

Quote from Mike72

Nochmal... gaaanz laaangsam
Nach diesem Schaltplan verdrahten, ggf. an deine Kabelfarben anpassen:
hyperion-project.org/index.php?attachment/1793/

Dein Plan ist für WS2801, franzli benutzt aber APA102.. das nur mal, um Verwirrung zu reduzieren.

Quote from franzli

so:

Müsste so passen. Kontrollier aber nochmal ganz genau, dass die beiden Kabel bzw. Lötstellen in der Mitte des Streifens keinen Kontakt haben, das ist schlecht zu sehen (und gelötet).

Mike72 · Apr 14th 2019

Quote from Arakon

Dein Plan ist für WS2801, franzli benutzt aber APA102.. das nur mal, um Verwirrung zu reduzieren.

@Arakon: ist korrigiert.

Frage an die Spezialisten: Kann es sein, dass die APA102 mit den 3.3V SPI-Output vom Raspberry nicht klarkommen?

franzli · Apr 14th 2019

Bekomme dies lötpunkte nicht auf den Streifen, perlt nicht ab.
Wenn ich mit dem Lötkolben und dem Lötzinn an die Kabel oder streifen komme, bleibt alles Lötzinn am Kolben kleben, trotz Lötfett.
Wenn das so weiter geht fliegt alles zum Fenster raus.
Hab im Moment keinen Bock mehr.
Muss mal was essen dann später nochmal testen, vielleicht wird es dann besser.
So habe einen neuen Lötkolben mit einer Spitze besorgt.
Mal sehen ob es dann besser funktioniert.

Mambojambo · Apr 14th 2019

Ich verwende die APA102. Die Bilder im Anhang zeigen meinen Aufbau.

Vielleicht hilft es ja.

franzli · Apr 14th 2019

Waaaaahnsinnnnnnn.
Kann es nicht glauben, aber es hat funktioniert.
Die drei leds haben geleuchtet

wie mache ich denn nun weiter?

So wie auf dem Bild im post 42?

DeWe · Apr 14th 2019

Frage auch wenn es unwahrscheinlich ist: In welcher Gegend wohnst? Wenn Mch kann ich mal vorbeischauen...

franzli · Apr 14th 2019

"log"

SSH Traffic:
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Sun 2019-04-14 10:29:03 CEST, end at Sun 2019-04-14 16:38:08 CEST. --
ssh in: Apr 14 10:29:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: Hyperion Ambilight Deamon (311)
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: {
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "colorOrder" : "rgb",
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "name" : "MyHyperionConfig",
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "rate" : 1000000,
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "type" : "apa102"
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: }
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: INFO: Creating linear smoothing
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Hyperion started and initialised
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: started
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Json server created and started on port 19444
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Frame grabber created and started
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 10:29:09 osmc hyperiond[311]: EFFECTENGINE INFO: effect finished
ssh in: Apr 14 16:25:05 osmc hyperiond[311]: INFO: Application closed with code 0
ssh in: Apr 14 16:25:05 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 14 16:25:05 osmc hyperiond[311]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 14 16:25:05 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 16:25:07 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: Hyperion Ambilight Deamon (1129)
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: {
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: "colorOrder" : "rgb",
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: "name" : "MyHyperionConfig",
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: "rate" : 1000000,
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: "type" : "ws2801"
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: }
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Creating linear smoothing
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Hyperion started and initialised
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: started
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Json server created and started on port 19444
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: INFO: Frame grabber created and started
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 16:25:07 osmc hyperiond[1129]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 16:25:10 osmc hyperiond[1129]: EFFECTENGINE INFO: effect finished
ssh in: Apr 14 16:25:15 osmc hyperiond[1129]: INFO: Application closed with code 0
ssh in: Apr 14 16:25:15 osmc hyperiond[1129]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 14 16:25:15 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 14 16:25:15 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 16:25:16 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: Hyperion Ambilight Deamon (1155)
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: {
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: "colorOrder" : "rgb",
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: "name" : "MyHyperionConfig",
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: "rate" : 1000000,
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: "type" : "ws2801"
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: }
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Creating linear smoothing
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Hyperion started and initialised
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: started
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Json server created and started on port 19444
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: INFO: Frame grabber created and started
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 16:25:17 osmc hyperiond[1155]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 16:25:20 osmc hyperiond[1155]: EFFECTENGINE INFO: effect finished
ssh in: Apr 14 16:37:37 osmc hyperiond[1155]: INFO: Application closed with code 0
ssh in: Apr 14 16:37:37 osmc hyperiond[1155]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 14 16:37:37 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 14 16:37:37 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 16:37:39 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: Hyperion Ambilight Deamon (1368)
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: {
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: "colorOrder" : "rgb",
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: "name" : "MyHyperionConfig",
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: "rate" : 1000000,
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: "type" : "ws2801"
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: }
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Creating linear smoothing
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Hyperion started and initialised
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: started
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Json server created and started on port 19444
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: INFO: Frame grabber created and started
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 16:37:39 osmc hyperiond[1368]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 16:37:42 osmc hyperiond[1368]: EFFECTENGINE INFO: effect finished
ssh in: Apr 14 16:37:53 osmc hyperiond[1368]: INFO: Application closed with code 0
ssh in: Apr 14 16:37:53 osmc hyperiond[1368]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 14 16:37:53 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 14 16:37:53 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 16:37:55 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: Hyperion Ambilight Deamon (1391)
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: {
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: "colorOrder" : "rgb",
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: "name" : "MyHyperionConfig",
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: "rate" : 1000000,
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: "type" : "ws2801"
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: }
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Creating linear smoothing
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Hyperion started and initialised
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: started
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Json server created and started on port 19444
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 16:37:55 osmc hyperiond[1391]: INFO: Frame grabber created and started
ssh in: Apr 14 16:37:56 osmc hyperiond[1391]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 16:37:56 osmc hyperiond[1391]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 16:37:58 osmc hyperiond[1391]: EFFECTENGINE INFO: effect finished
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: hyperion-remote -c ff3591
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 255 53 145
ssh out: hyperion-remote -c 03ffb0
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 3 255 176
ssh out: hyperion-remote -c effff7
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 239 255 247
ssh out: hyperion-remote -c fbff2f
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 251 255 47
ssh out: hyperion-remote -c 36ffac
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 54 255 172
ssh out: hyperion-remote --clearall
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Clear all priority channels
ssh out: hyperion-remote -c 36ffac
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 54 255 172
ssh out: hyperion-remote -c 62ff55
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 98 255 85
ssh out: hyperion-remote -c 62ff55
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 98 255 85
ssh out: hyperion-remote -c 1d4a18
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh in: Connected to localhost:19444
ssh in: Set color to 29 74 24
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh disconnected
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh disconnected
ssh connected
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2019-04-14 16:43:21 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh in: Setting up x11-common (1:7.7+19) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: line 13: update-rc.d: command not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libsm6:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2019-04-14 16:43:53 URL:https://kent.dl.sourceforge.ne…/hyperion_rpi_osmc.tar.gz [1640849/1640849] -> "-" [1]
ssh in: ---> Installing systemd script
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh disconnected
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Thu 2016-11-03 18:16:42 CET, end at Sun 2019-04-14 17:36:06 CEST. --
ssh in: Apr 14 10:29:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: Hyperion Ambilight Deamon (311)
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION INFO: ColorTransform 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION INFO: ColorCorrection 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION INFO: ColorAdjustment 'default' => [0; 5]
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: {
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "colorOrder" : "rgb",
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "name" : "MyHyperionConfig",
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "rate" : 1000000,
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: "type" : "ws2801"
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: }
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: INFO: Creating linear smoothing
ssh in: Apr 14 10:29:05 osmc hyperiond[311]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Hyperion started and initialised
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: started
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Json server created and started on port 19444
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: INFO: Frame grabber created and started
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 10:29:06 osmc hyperiond[311]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 10:29:09 osmc hyperiond[311]: EFFECTENGINE INFO: effect finished
ssh in: Apr 14 17:35:56 osmc hyperiond[311]: INFO: Application closed with code 0
ssh in: Apr 14 17:35:56 osmc hyperiond[311]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 14 17:35:56 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 14 17:35:56 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 14 17:35:57 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: Hyperion Ambilight Deamon (1151)
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: HYPERION INFO: ColorTransform 'default' => [0; 93]
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: HYPERION INFO: ColorCorrection 'default' => [0; 93]
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: HYPERION INFO: ColorAdjustment 'default' => [0; 93]
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: LEDDEVICE INFO: configuration:
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: {
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: "colorOrder" : "rgb",
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: "name" : "MyHyperionConfig",
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: "output" : "/dev/spidev0.0",
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: "rate" : 1000000,
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: "type" : "apa102"
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: }
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Creating linear smoothing
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Hyperion started and initialised
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: started
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Json server created and started on port 19444
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Proto server created and started on port 19445
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: BLACKBORDER INFO: mode:default
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: INFO: Frame grabber created and started
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: BORDER SWITCH REQUIRED!!
ssh in: Apr 14 17:35:57 osmc hyperiond[1151]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 14 17:36:00 osmc hyperiond[1151]: EFFECTENGINE INFO: effect finished
ssh disconnected
ssh connected
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2019-04-14 17:44:23 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh in: Setting up x11-common (1:7.7+19) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: line 13: update-rc.d: command not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libsm6:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2019-04-14 17:44:42 URL:https://kent.dl.sourceforge.ne…/hyperion_rpi_osmc.tar.gz [1640849/1640849] -> "-" [1]
ssh in: ---> Installing systemd script
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
sftp Send Hyperion Config - Sourcepath: C:/Users/Joa/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null

habe es so verkabelt und folgende Datei konfiguriert.
es leuchtet nicht, kann es auch an dem Verbinder liegen (weisse Kabelklemme)?

LEDs leuchten nicht

Participate now!

Users Viewing This Thread