Beiträge von Dennis

    Hoi iedereen,


    Ik heb nu enige tijd mijn Ambilight werkend met apa102 leds en dat werkt perfect!
    Nu heb ik sinds 2 weken 2 Philips Hue lampen en de de bridge v2.0.
    Ik heb al van alles geprobeerd om deze ook werkend te krijgen maar ik krijg het voor geen mogelijkheid werkend.
    Ik heb een user id aangemaakt en ingevuld met het juiste ip adres , dit alles heb ik gedaan op een nieuwe opzet om mijn werkende sd voor de apa102 leds niet om zeep te helpen.
    Ik ben geen programmeur dus heb de stap voor stap handleiding gevolgd die hier te vinden is.


    Wie heeft hier een tutorital voor of een stap voor stap uitleg?


    Bij voorbaat dank!

    Hoi,


    Na heel veel zoeken op het internet en diverse forums en het niet kunnen vinden wat ik zoek stel ik de vraag hier met de hoop op dat iemand mij kan helpen aan een schema.


    Het gaat om een schema voor level shifter 74ahct126 in combinatie met een raspberry 3b en apa102 rgb.


    Ik heb wel een schema gevonden bij adafruit voor een level shifter 74ahct125 ,maar ik weet niet of dat goed gaat ik kan hier niks over vinden.


    Ik ben niet bekend met de level shifter maar ik heb gelezen dat deze het flikkeren van de leds kan voorkomen.


    Ik hoop dat iemand mij op weg kan helpen hiermee.


    Bij voorbaat dank.

    Hoi,


    Graag zou ik willen weten of er een manier is om de achtergrond kleur van de muur te compenseren?
    Ik heb namelijk een lichtblauwe achterwand dus de kleuren zien er iets anders uit.
    Zijn er plannen om deze functie te integreren of is dat technisch niet haalbaar?


    Alvast bedankt.


    Groeten Dennis.

    En het volgende krijg ik te zien als log:


    SSH Traffic:
    ssh connected
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl start hyperion 2>/dev/null ; sudo service hyperion start 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo journalctl -u hyperion.service 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'

    Hallo Rick,


    Mijn distributie is OpenELEC-RPi2.arm-6.0.3_lightberry.img


    Op een of andere manier krijg ik geen log te zien en loopt Hypercon vast en moet ik hem sluiten doormiddel van taakbeheer.


    Is er een andere manier om die log te krijgen?

    Hoi,


    Ik ben bezig met ambilight vie RPI3 en Aruino ik heb bijna alles werkend maar ik krijg geen effecten in mijn Hyperion Android app.
    Colorwheel werkt wel maar zodra ik de effecten selecteer blijft dat leeg.


    Als ik inlog op de RPI3 via WinSCP en het mapje opent van Hyperion en vervolgens die van effects staan er 41 effecten in
    maar zijn niet zichtbaar in de Android app.


    Ben ik soms iets vergeten om te selecteren bij het configureren van de config file van Hypercon?


    Ik hoop dat iemand mij kan helpen hiermee , aangezien ik pas begonnen ben met RPI3 en Arduino.


    Alvast bedankt.


    Dennis