I solved it but I'm putting all info together to show off the solution
Beiträge von Alessandro1985
-
-
I had time to dump the log:
Code
Alles anzeigenssh out: sudo journalctl -u hyperion.service 2>/dev/null ssh in: -- Logs begin at Mon 2017-03-27 19:16:40 UTC, end at Mon 2017-03-27 19:20:42 UTC. -- ssh in: Mar 27 19:16:49 raspberrypi systemd[1]: Starting Hyperion Systemd service... ssh in: Mar 27 19:16:49 raspberrypi systemd[1]: Started Hyperion Systemd service. ssh in: Mar 27 19:16:51 raspberrypi hyperiond[341]: Hyperion Ambilight Deamon (341) ssh in: Mar 27 19:16:51 raspberrypi hyperiond[341]: Version : V1.03.2 (brindosch-99d9396/d3713a8-1469452981 ssh in: Mar 27 19:16:51 raspberrypi hyperiond[341]: Build Time: Jul 25 2016 06:54:40 ssh in: Mar 27 19:16:51 raspberrypi hyperiond[341]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: HYPERION INFO: ColorTransform 'default' => [0; 203] ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: HYPERION INFO: ColorCorrection 'default' => [0; 203] ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: HYPERION INFO: ColorAdjustment 'default' => [0; 203] ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: LEDDEVICE INFO: configuration: ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: { ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: "colorOrder" : "rgb", ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: "name" : "MyHyperionConfig", ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: "type" : "ws2812b" ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: } ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: Page 0 not present (pfn 0xa100000000016979) ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: Page map: 1 pages ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: WS2812b init finished ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: INFO: Creating linear smoothing ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects ssh in: Mar 27 19:16:52 raspberrypi hyperiond[341]: EFFECTENGINE INFO: Initializing Python interpreter ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: INFO: Hyperion started and initialised ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: INFO: Boot sequence 'Knight rider' EFFECTENGINE INFO: run effect Knight rider on channel 0 ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: BLACKBORDER INFO: mode:default ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: started ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: INFO: Json server created and started on port 19444 ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: INFO: Proto server created and started on port 19445 ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: V4L2GRABBER INFO: width=720 height=576 ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: V4L2GRABBER INFO: pixel format=UYVY ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: BLACKBORDER INFO: mode:default ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: V4L2GRABBER INFO: signal threshold set to: {0,0,0} ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: V4L2GRABBER INFO: started ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: INFO: V4L2 grabber created and started ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: V4L2GRABBER ERROR: Frame too small: 825372 != 829440 ssh in: Mar 27 19:16:53 raspberrypi hyperiond[341]: V4L2GRABBER ERROR: Frame too small: 825486 != 829440 ssh in: Mar 27 19:16:54 raspberrypi hyperiond[341]: V4L2GRABBER INFO: stopped ssh in: Mar 27 19:16:56 raspberrypi hyperiond[341]: EFFECTENGINE INFO: effect finished ssh in: Mar 27 19:16:57 raspberrypi hyperiond[341]: V4L2GRABBER INFO: started
I'm not sure but probably is the Page 0 not present (pfn 0xa100000000016979) part???
-
5 x 30 = 150
wooops.. I meant 60 led/m...
I wrote 300 in the first istance, then I deleted one zero... and didn't change it to 60.
EDITED!;) -
Hi everyone,
this thing is driving me crazy...
Hyperion is not controlling leds. No turning on, no turning off... nothing on boot, nothing on executing standard effects...
HyperCon is connected, but can't change color (even turn on or off leds)
Android App not working either. (it syncs with daemon and lists all effects available, but nothing happens)I'm sure its a simple problem and I'm focusing on the wrong spot....
My specs:
Board = Rpi1 B (2011.12)
Leds = WS2812b - 5m - 60leds/m [*edit]
ALL 300 LEDS ARE CONNECTED RIGHT NOW. IN CONFIGURATION FILE ONLY 206 ARE CONSIDERED. should not be a problem... should it?Wiring = as per the following guide:
http://dordnung.de/raspberrypi-ledstrip/ws2812
(testd with python script included in this tutorial and every thing is working fine - all 300 leds work and can be controlled)SO = fresh install 2017-03-02-raspbian-jessie-lite
Hyperion = installed with command line script (after apt update && apt upgrade)HyperCon is able to connect via SSH and take screenshot of grabber, starting / stopping daemon...
On boot hyperiond starts correctly, and no error is returned.Config:
Code
Alles anzeigen// Automatically generated configuration file for Hyperion ambilight daemon // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area) // Generated by: HyperCon (The Hyperion deamon configuration file builder) // Created with HyperCon V1.03.1 (11.06.2016) { // DEVICE CONFIGURATION "device" : { "name" : "MyHyperionConfig", "type" : "ws2812b", "colorOrder" : "rgb" }, // COLOR CALIBRATION CONFIG "color" : { "channelAdjustment" : [ { "id" : "default", "leds" : "*", "pureRed" : { "redChannel" : 255, "greenChannel" : 0, "blueChannel" : 0 }, "pureGreen" : { "redChannel" : 0, "greenChannel" : 255, "blueChannel" : 0 }, "pureBlue" : { "redChannel" : 0, "greenChannel" : 0, "blueChannel" : 255 } } ], "temperature" : [ { "id" : "default", "leds" : "*", "correctionValues" : { "red" : 255, "green" : 255, "blue" : 255 } } ], "transform" : [ { "id" : "default", "leds" : "*", "hsl" : { "saturationGain" : 1.0000, "luminanceGain" : 1.0000, "luminanceMinimum" : 0.0000 }, "red" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "green" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "blue" : { "threshold" : 0.0000, "gamma" : 2.5000 } } ], // SMOOTHING CONFIG "smoothing" : { "type" : "linear", "time_ms" : 200, "updateFrequency" : 20.0000, "updateDelay" : 0 } }, // V4L2 GRABBER CONFIG "grabber-v4l2" : { "device" : "/dev/video0", "input" : 0, "standard" : "PAL", "width" : 640, "height" : 480, "frameDecimation" : 2, "sizeDecimation" : 8, "priority" : 900, "mode" : "2D", "cropLeft" : 22, "cropRight" : 22, "cropTop" : 22, "cropBottom" : 22, "redSignalThreshold" : 0.1, "greenSignalThreshold" : 0.1, "blueSignalThreshold" : 0.1 }, // BLACKBORDER CONFIG "blackborderdetector" : { "enable" : true, "threshold" : 0.0, "unknownFrameCnt" : 600, "borderFrameCnt" : 50, "maxInconsistentCnt" : 10, "blurRemoveCnt" : 1, "mode" : "classic" }, // BOOTEFFECT CONFIG "bootsequence" : { "color" : [0,0,0], "effect" : "Rainbow swirl fast", "duration_ms" : 3000, "priority" : 700 }, // JSON SERVER CONFIG "jsonServer" : { "port" : 19444 }, // PROTO SERVER CONFIG "protoServer" : { "port" : 19445 }, // EFFECT PATH "effects" : { "paths" : [ "/storage/hyperion/effects", "/usr/share/hyperion/effects" ] }, // NO FRAME GRABBER CONFIG // NO KODI CHECK CONFIG // NO BOBLIGHT SERVER CONFIG // NO JSON/PROTO FORWARD CONFIG // LED CONFIGURATION "leds" : [ { "index" : 0, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5156 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 1, "hscan" : { "minimum" : 0.4844, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 2, "hscan" : { "minimum" : 0.4688, "maximum" : 0.4844 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 3, "hscan" : { "minimum" : 0.4531, "maximum" : 0.4688 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 4, "hscan" : { "minimum" : 0.4375, "maximum" : 0.4531 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 5, "hscan" : { "minimum" : 0.4219, "maximum" : 0.4375 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 6, "hscan" : { "minimum" : 0.4063, "maximum" : 0.4219 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, .....ALL LEDS IN BETWEN..... { "index" : 200, "hscan" : { "minimum" : 0.5938, "maximum" : 0.6094 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 201, "hscan" : { "minimum" : 0.5781, "maximum" : 0.5938 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 202, "hscan" : { "minimum" : 0.5625, "maximum" : 0.5781 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 203, "hscan" : { "minimum" : 0.5469, "maximum" : 0.5625 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 204, "hscan" : { "minimum" : 0.5313, "maximum" : 0.5469 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 205, "hscan" : { "minimum" : 0.5156, "maximum" : 0.5313 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } } ], "endOfJson" : "endOfJson" }
Thanks for support!!!
Alex