Updraw is also working fine for me... I checked with the wled option and that also worked...
Beiträge von Manish Verma
-
-
Well i got it working using udpraw
-
It says hardware revision not supported..What does that mean?
I have a Raspberry Pi 4B 2GB Ram model.
-
2021-04-06T08:26:32.871Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyAMA0'
2021-04-07T07:05:15.447Z
[hyperiond LEDDEVICE] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported'
2021-04-07T07:05:56.777Z
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.29.143
2021-04-07T07:05:56.777Z
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.29.143
-
-
Its a usb video capture stick like this one-
-
The issue is resolved when i used a different video capture device..
-
are you maybe setting the resolution too high and crashing the device? Does reducing it down make it more stable?
Nope i tried even with low resolution it didn't work..
-
The video capture device is working fine when i checked with OBS in my windows pc..But in Hyperion it works for just a few minutes and then vanishes...
I think i have to try with some other video capture device.
-
Hi I'm new here and have just got my first raspberry pi Hyperion project working with reasonable ease. From what I see my setup is exactly as you have done.
I might be able to offer an idea
I have noticed that the blue LED on my video capture device wasn't lighting up indicating a stable video input and Hyperion was not detecting the video capture device. I power cycled the video capture box including the 2 HDMI cables (as there is 5V power on the HDMI cable) and micro USB power and USB data cables.
When I connected the HDMI input source last I got the Blue LED and then Hyperion recognized the USB device and I could configure it as per the pic attached.
maybe your capture device needs the same reboot?
Hope this helps.
Yeah it worked but the USB Video option vanishes after sometime
-
Manish Verma: Make a SSH connection to the RPi. Log in and type lsusb in the console. What's the output?
For more information about the video capture type dmesg | grep -i Video.
this is what i get from lsusb
And this is what i got from dmesg | grep -i Video
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835 .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=E4:5F:01:13:99:DE vc_mem.mem_base=0x 3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PART UUID=14543347-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 1.077470] vc-sm: Videocore shared memory driver
[ 4.246718] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.282566] videodev: Linux video capture interface: v2.00
[ 4.409032] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13
[ 4.409591] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14
[ 4.410027] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15
[ 4.410377] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16
[ 4.413394] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 4.427544] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 4.439965] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 277.585808] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 277.588895] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 277.588915] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 277.589316] usbcore: registered new interface driver uvcvideo
[ 277.589327] USB Video Class driver (1.1.1)
[ 278.944208] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 278.946022] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 278.946040] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 282.554011] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 282.555587] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 282.555605] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 287.337067] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 287.339027] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 287.339046] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 314.242626] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 314.244103] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 314.244121] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 318.512603] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 318.514438] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 318.514457] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 320.332414] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 320.333891] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 320.333908] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 322.283387] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 322.285290] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 322.285308] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 324.612217] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 324.613774] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 324.613793] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 328.392136] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 328.393634] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 328.393650] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
[ 330.572066] uvcvideo: Found UVC 1.00 device <unnamed> (534d:2109)
[ 330.573566] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not i nitialized!
[ 330.573584] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initi alized!
When i plug any other usb device in my Rpi 4 like a flash drive ..it immediately shows up in lsusb
-
I read that thread... This is what it is written there
"
Go to the WebUI and menu USB grabber;
Device; USB video: USB video
Input; Camera1 ( or higher)
Resolution; in 16/9 lowest as possible and then build up the resolution
Size decimation; set to at least 4 until 12 >> the higher count, the worse image
Frames a second; 15FPS or go lower and higher.
"
The main issue is that my hyperion doesn't detect the usb capture in the first place...So i don't see the "USB Video" option under the USB capture tab to proceed further as instructed above.
-
-
Nope...i tried with both of those listed there but didn't work.
-
-