Ihr seid Großartig, auch wenn mir einige Details die ich hier ändern muss,
aber da könnt ihr ja nichts für .
Merci
Ihr seid Großartig, auch wenn mir einige Details die ich hier ändern muss,
aber da könnt ihr ja nichts für .
Merci
pclin Du sagst gerade Dinge, die ich so garnicht hören wollte
"Eine Karte mit Loop Out würde ich nicht empfehlen." Die lösung wäre Ideal für mich da es so schön Kompakt ist und ich mir das Splitter gedöns eigentlich sparen wollte. ARC geht mit dem jetzigen Grabber auch ohne Probleme.
HD Fury fällt mal ganz weit runter. Is ne Hobby spielerei dafür is mir das dann doch zuviel für nen bisschen rumspielen. Aber bisschen mehr als 10€ dürfen es dann schon sein. Den jetzigen Grabber hatte ich aus ner Empfehlung bei Youtube, da kannte ich dieses Froum noch nicht Was wäre denn akzeptabel mit Loop out um das ganze so schlank wie möglich zu halten?
Danke Dir für die Tipps, bringt mich schon mal einen Schritt weiter.
Also, Pfade stimmen und die Config wird auch nicht als root geladen. Soweit alles gut. User passt und Verzeichnis auch.
Werde das ganze jetzt nochmal durchspielen. Das mir nur ne Camera als Input angeoten wird ist somit dann auch Korrekt?
Denn da scheint Alpha10 definitiv daneben zu liegen. Dann hätte ich tatsächlich noch eine Frage zum Grabber, worauf sollte ich dabei achten wenn ich einen bestelle, brauche auf jeden fall einen mit Passthrough. Weil ich ich das Signal vom Receiver an den Grabber und von da, an den TV und den Raspi weiterleite. Danke nochmal für den Super Support
werde ich mal checken, wenn dann war es versehentlich, die Erstinstalltion war ziemlich tricky, weiß nur nicht ob ich das Vor
oder Nach dem neuen aufsetzen vom Debian gemacht hab. Wäre eine möglichkeit. Wobei die jetzige Installation von HyperionNG nicht als root läuft. Krieg das schon irgendwie ans laufen, falls nicht, kann ich mich ja hier wieder durchfragen. Echt super Support!!!
Jetzt fehlt mir nur noch der richtige Grabber und dann bin ich Glücklich
Einfach erklärt: wenn ich HyperionNG deiinstalliert habe, danach den .hyperion ordner lösche, danach HypernionNG wieder installiert habe, ins Dashboard einlogge ( komischerweise da ist alles wieder auf Standarteinstellungen) Ich dann die LED konfiguriere, hat er Automatisch die Anzahl der LEDs schon drin. Nur das Layout nicht. Die Einstelluingen vom Grabber sind nach der Auswahl auch so wie vorher schon gesetzt, inkl. Schwarzbalken erkennung die bei mir aud 7 steht.
im Debug modus starten wär dann mit welchen behefel unter Debian Buster?
Na das is doch mal ne klare Aussage. Kann ich ja nicht wissen, bastel ja erst seit 4 Wochen damit rum.
Eine Empfehlung für einen Grabber der das unterstützt und wo man den Ordern kann?
Wär für nen Tipp dankbar
Gruß
smoga
Das hab ich ja schon gemacht. Mehrfach. Hab sogar x11 qt5 die mit HyperionNG nicht deinstalliert werden, gelöscht. Trotzdem bekomme ich immer wieder das gleiche angeboten. Sobald ich die Instanzen angelegt habe ist alles schon wieder so wie es vorher war.
Was mir aufgefallen ist, egal was ich mache also Hyperion komplett deinstallieren, danach wieder installtieren, reste noch mal manuelll lösche vor der ernueten Installation, es ist immer die alte Konfiguration drin.
Ich hab keine Ahnung woher Hyperion sich die zieht. Hab in der config irgendwo was von Alpha8 gelesen, die hatte ich tatsächlich mal kurz drauf in kombination mit einem anderen Grabber. Was mir aber immer noch nicht erklärt warum es Vorher funktionert hat und jetzt keine einstellungen mehr vorhanden sind. Es wurde ja, bis auf das Update, nichts verändert.
Ich seh da nix, unterschiede seh ich auch keine.
v4l2-ctl --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[0]: 'MJPG' (Motion-JPEG, compressed)
Size: Discrete 1920x1080
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Size: Discrete 1280x720
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Size: Discrete 960x540
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Size: Discrete 800x450
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Size: Discrete 640x360
Interval: Discrete 0.017s (60.000 fps)
Interval: Discrete 0.033s (30.000 fps)
Alles anzeigen
pclin Bin mir gerade nicht sicher was Du mir damit sagen willst.
Also is mein Grabber mist? okay das kann durchaus sein, erklärt aber leider nicht, warum ich unter Alpha9 sämtliche Formate wählen konmnte und jezt unter 10 mir nur noch Camera1 und MJPEG angeboten wird.
Vorher wurde alles korrekt erkannt
dann könne wir auch auf deutsch kommunizieren, dann muss man sich nicht so verbiegen beim schreiben
Sorry for the delay, i was really occupied during the week. A job kills your life. Rellay ;.)
here is the output:
Driver Info:
Driver name : uvcvideo
Card type : USB3.0 HD Video Capture: USB3.0
Bus info : usb-0000:01:00.0-1.1
Driver version : 5.10.17
Capabilities : 0x84a00001
Video Capture
Metadata Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : uvcvideo
Model : USB3.0 HD Video Capture: USB3.0
Serial : HU123450
Bus info : usb-0000:01:00.0-1.1
Media version : 5.10.17
Hardware revision: 0x00000328 (808)
Driver version : 5.10.17
Interface Info:
ID : 0x03000002
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : USB3.0 HD Video Capture: USB3.0
Function : V4L2 I/O
Flags : default
Pad 0x01000007 : 0: Sink
Link 0x02000010: from remote pad 0x100000a of entity 'Processing 3': Data, Enabled, Immutable
Priority: 2
Video input : 0 (Camera 1: ok)
Format Video Capture:
Width/Height : 1280/720
Pixel Format : 'MJPG' (Motion-JPEG)
Field : None
Bytes per Line : 0
Size Image : 921600
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: ITU-R 601
Quantization : Default (maps to Full Range)
Flags :
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 1280, Height 720
Default : Left 0, Top 0, Width 1280, Height 720
Pixel Aspect: 1/1
Selection: crop_default, Left 0, Top 0, Width 1280, Height 720, Flags:
Selection: crop_bounds, Left 0, Top 0, Width 1280, Height 720, Flags:
Streaming Parameters Video Capture:
Capabilities : timeperframe
Frames per second: 30.000 (30/1)
Read buffers : 0
Alles anzeigen
Lord-Grey Obviously Hypeerion needs a reboot now I can chose some options but I can only choose Camera1 as input and MJPEG as codec
Yes i did already was in Expert Mode
Debug Hyperion
Hyperion System Summary Report (My Hyperion Config), Reported instance: First LED Hardware instance
< ----- System information -------------------- >
Hyperion Server:
- Build: master (GitHub-46115131/5ef8c23b-1626629002)
- Build time: Jul 28 2021 20:01:26
- Git Remote: https://github.com/hyperion-project/hyperion.ng.git
- Version: 2.0.0-alpha.10
- UI Lang: de (BrowserLang: de)
- UI Access: default
- Avail Capt: dispmanx,v4l2,framebuffer,qt
- Database: read/write
Hyperion Server OS:
- Distribution: Raspbian GNU/Linux 10 (buster)
- Architecture: arm
- CPU Model: ARMv7 Processor rev 3 (v7l)
- CPU Type: Raspberry Pi 4 Model B Rev 1.2
- CPU Revision: c03112
- CPU Hardware: BCM2711
- Kernel: linux (5.10.17-v7l+ (WS: 32))
- Qt Version: 5.11.3
- Python Version: 3.7.3
- Browser: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:90.0) Gecko/20100101 Firefox/90.0
< ----- Configured Instances ------------------ >
0: First LED Hardware instance Running: true
1: TV-LED Running: true
< ----- This instance's priorities ------------ >
240: VISIBLE! (V4L) Owner: V4L2
priorities_autoselect: true
< ----- This instance components' status ------->
ALL - true
SMOOTHING - true
BLACKBORDER - true
FORWARDER - false
BOBLIGHTSERVER - false
GRABBER - false
V4L - true
LEDDEVICE - true
< ----- This instance's configuration --------- >
Capture":{"systemEnable":false,"systemGrabberDevice":"NONE","systemPriority":250,"v4lEnable":true,"v4lGrabberDevice":"USB3.0 HD Video Capture: USB3.0","v4lPriority":240},"jsonServer":{"port":19444},"ledConfig":{"classic":{"bottom":74,"left":41,"right":41,"top":74},"ledBlacklist":[],"matrix":{"cabling":"snake","ledshoriz":1,"ledsvert":1,"start":"top-
2021-07-28T18:08:52.086Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[1], previousPriority[255]
2021-07-28T18:08:52.086Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-07-28T18:08:52.148Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:271:setInputImage()) Priority 1 is now active
2021-07-28T18:08:52.148Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:374:setCurrentTime()) Set visible priority to 1
2021-07-28T18:08:52.149Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-07-28T18:08:52.149Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[1], previousPriority[255]
2021-07-28T18:08:52.149Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-07-28T18:08:52.217Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2021-07-28T18:08:52.217Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2021-07-28T18:08:52.218Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-07-28T18:08:52.219Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-07-28T18:08:52.242Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-07-28T18:08:52.242Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-07-28T18:08:52.242Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-07-28T18:08:52.243Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :switch to Hyperion instance 1
2021-07-28T18:12:19.497Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:1278:discover()) inputs size [1], isEmpty [0]
2021-07-28T18:12:30.976Z [hyperiond V4L2] (DEBUG) (Grabber.cpp:141:setWidthHeight()) Set new width: 1280, height: 720 for capture
2021-07-28T18:12:30.976Z [hyperiond V4L2] (INFO) Set flipmode to NO_CHANGE
2021-07-28T18:12:30.976Z [hyperiond V4L2] (INFO) Reloading V4L2 Grabber
2021-07-28T18:12:30.976Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:122:uninit()) Uninit grabber: USB3.0 HD Video Capture: USB3.0 (/dev/video0)
2021-07-28T18:12:30.981Z [hyperiond V4L2] (INFO) Stopped
2021-07-28T18:12:30.983Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:151:init()) Set device (path) to: USB3.0 HD Video Capture: USB3.0 (/dev/video0)
2021-07-28T18:12:30.983Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:488:init_device()) Set device input to: Camera 1
2021-07-28T18:12:30.984Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:614:init_device()) Set resolution to width=1280 height=720
2021-07-28T18:12:30.985Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:631:init_device()) Set framerate to 30 fps
2021-07-28T18:12:30.985Z [hyperiond V4L2] (DEBUG) (V4L2Grabber.cpp:739:init_device()) Pixel format=MJPEG
2021-07-28T18:12:30.994Z [hyperiond V4L2] (INFO) Started
2021-07-28T18:12:31.055Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:271:setInputImage()) Priority 240 is now active
2021-07-28T18:12:31.055Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:374:setCurrentTime()) Set visible priority to 240
2021-07-28T18:12:31.056Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], p
xxioBroker:~ $ dmesg | grep -i Video
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1024x768M@60 smsc95xx.macaddr=DC:A6:32:A0:4E:81 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=a7b76aff-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 2.539526] usb 1-1.1: Product: USB3.0 HD Video Capture
[ 7.102231] videodev: Linux video capture interface: v2.00
[ 7.142140] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 7.312427] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 7.312983] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 7.313631] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 7.319737] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 7.334475] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 7.342247] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 7.356042] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 7.595183] uvcvideo: Found UVC 1.00 device USB3.0 HD Video Capture (eba4:7588)
[ 7.599565] usbcore: registered new interface driver uvcvideo
[ 7.599578] USB Video Class driver (1.1.1)
xx@ioBroker:~ $ v4l2-ctl --all
Driver Info:
Driver name : uvcvideo
Card type : USB3.0 HD Video Capture: USB3.0
Bus info : usb-0000:01:00.0-1.1
Driver version : 5.10.17
Capabilities : 0x84a00001
Video Capture
Metadata Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : uvcvideo
Model : USB3.0 HD Video Capture: USB3.0
Serial : HU123450
Bus info : usb-0000:01:00.0-1.1
Media version : 5.10.17
Hardware revision: 0x00000328 (808)
Driver version : 5.10.17
Interface Info:
ID : 0x03000002
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : USB3.0 HD Video Capture: USB3.0
Function : V4L2 I/O
Flags : default
Pad 0x01000007 : 0: Sink
Link 0x02000010: from remote pad 0x100000a of entity 'Processing 3': Data, Enabled, Immutable
Priority: 2
Video input : 0 (Camera 1: ok)
Format Video Capture:
Width/Height : 1280/720
Pixel Format : 'MJPG' (Motion-JPEG)
Field : None
Bytes per Line : 0
Size Image : 921600
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: ITU-R 601
Quantization : Default (maps to Full Range)
Flags :
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 1280, Height 720
Default : Left 0, Top 0, Width 1280, Height 720
Pixel Aspect: 1/1
Selection: crop_default, Left 0, Top 0, Width 1280, Height 720, Flags:
Selection: crop_bounds, Left 0, Top 0, Width 1280, Height 720, Flags:
Streaming Parameters Video Capture:
Capabilities : timeperframe
Frames per second: 30.000 (30/1)
Read buffers : 0
xx@ioBroker:~ $
Hi Guys,
I hope for some help with a strange problem which i got after the update to Alpha10
In Alpha9 my grabber was choosable and i could do settings like PAL/NTSC and resolution and stuff like that.
After the update I only can choose my Grabber and as Inputt only Camera1 and MJPEG.
As i recognized now this option is not given anymore. Now i can only change the resolution.
No idea what the issue is because i didn't changed anything on the configuration.
Downgrading back to Alpha9 sadly doesn't change anything of this behavior.
Any idea what could be the reason?
What i have done so far is unistlall an reinstall it, but for some reason always the old Configuration is loaded, compiled from scratch, same behavior including that the old config is loaded even if I deltetd before, lodaing another config file wich doesn't change anything.
Any help were appriciated. and yes, I'm not en english native speaker so please be kind if i was not veriy clear in my explanations.
Attached you find the outputs and the debug log