alles klar dann geht der mal zurück
Danke dir Mike
Werde mir dann wohl den WisFox Stick bestellen, die MiraBox ist einfach zu teuer.
Der Funktioniert ja anscheinend bis jetzt bei allen.
Oder gibts was besseres was "RockSolid" ist?
alles klar dann geht der mal zurück
Danke dir Mike
Werde mir dann wohl den WisFox Stick bestellen, die MiraBox ist einfach zu teuer.
Der Funktioniert ja anscheinend bis jetzt bei allen.
Oder gibts was besseres was "RockSolid" ist?
lsusb
Bus 002 Device 005: ID 0711:0a05 Magic Control Technology Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg | grep -i Video
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=DC:A6:32:3E:B8:CF vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=adcbc582-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 4.877714] videodev: Linux video capture interface: v2.00
[ 4.880852] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.974111] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 4.976128] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 4.983074] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 4.983474] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 5.047281] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.075363] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.106508] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.128494] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 5.297148] uvcvideo: Found UVC 1.00 device J5-USB Device (0711:0a05)
[ 5.315770] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 5.322489] usbcore: registered new interface driver uvcvideo
[ 5.322507] USB Video Class driver (1.1.1)
[ 791.852115] uvcvideo: Found UVC 1.00 device J5-USB Device (0711:0a05)
[ 791.855758] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 804.773394] uvcvideo: Found UVC 1.00 device J5-USB Device (0711:0a05)
[ 804.777415] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 813.327353] uvcvideo: Found UVC 1.00 device J5-USB Device (0711:0a05)
[ 813.336464] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 826.598872] uvcvideo: Found UVC 1.00 device J5-USB Device (0711:0a05)
[ 826.612167] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Alles anzeigen
Hi Pilin,
dritter versuch. Habe ich auch schon versucht, hat keinen Unterschied gemacht.
Habe nun einen anderen Grabber versucht (diesmal ohne Link)
JVA04 von j5Create
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.10
S: Manufacturer=Linux 5.10.63-v7l+ xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2109 ProdID=3431 Rev=04.21
S: Product=USB2.0 Hub
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=05.10
S: Manufacturer=Linux 5.10.63-v7l+ xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=0711 ProdID=0a05 Rev=01.00
S: Manufacturer=MCT
S: Product=J5-USB Device
S: SerialNumber=63212009291201
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=600mA
I: If#=0x0 Alt= 0 #EPs= 0 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#=0x1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I: If#=0x2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#=0x3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
Alles anzeigen
v4l2-ctl --all
Driver Info:
Driver name : uvcvideo
Card type : J5-USB Device: J5-CAPTURE
Bus info : usb-0000:01:00.0-1
Driver version : 5.10.63
Capabilities : 0x84a00001
Video Capture
Metadata Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : uvcvideo
Model : J5-USB Device: J5-CAPTURE
Serial : 63212009291201
Bus info : usb-0000:01:00.0-1
Media version : 5.10.63
Hardware revision: 0x00000100 (256)
Driver version : 5.10.63
Interface Info:
ID : 0x03000002
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : J5-USB Device: J5-CAPTURE
Function : V4L2 I/O
Flags : default
Pad 0x01000007 : 0: Sink
Link 0x02000010: from remote pad 0x100000a of entity 'Extension 4': Data, Enabled, Immutable
Priority: 2
Video input : 0 (Camera 1: ok)
Format Video Capture:
Width/Height : 720/480
Pixel Format : 'YUYV' (YUYV 4:2:2)
Field : None
Bytes per Line : 1440
Size Image : 691200
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: ITU-R 601
Quantization : Default (maps to Limited Range)
Flags :
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 720, Height 480
Default : Left 0, Top 0, Width 720, Height 480
Pixel Aspect: 1/1
Selection: crop_default, Left 0, Top 0, Width 720, Height 480, Flags:
Selection: crop_bounds, Left 0, Top 0, Width 720, Height 480, Flags:
Streaming Parameters Video Capture:
Capabilities : timeperframe
Frames per second: 29.970 (2997/100)
Read buffers : 0
brightness 0x00980900 (int) : min=0 max=255 step=1 default=128 value=128
contrast 0x00980901 (int) : min=0 max=255 step=1 default=128 value=128
saturation 0x00980902 (int) : min=0 max=255 step=1 default=128 value=128
hue 0x00980903 (int) : min=0 max=63 step=1 default=32 value=32
Alles anzeigen
Mit dem habe ich ein paar Sekunden eine Ausgabe und dann wird es schwarz ... ich hab schon pech.
Werde wohl nun eine MiraBox bestellen.
LG
Ritschi
Hi Mike72,
ist nen RPi4 mit 4GB Ram, steckt auf dem USB 3.0 Port.
Egal ob MJPEG oder YUYV, das Signal wird "kurz" (im ms Bereich) angezeigt und dann kommt der Regenbogen.
LG
Ritschi
Hallo zusammen,
ich habe mal was neues, einen HAMA Grabber, er wird erkannt kann auch alles einstellen. Jedoch wird das Video Signal nur kurz angezeigt und dann bekomm ich nen Regenbogen angezeigt:
Ausgabe am TV ist einwandfrei.
Hier die ausgaben vom Grabber:
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.10
S: Manufacturer=Linux 5.10.63-v7l+ xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2109 ProdID=3431 Rev=04.21
S: Product=USB2.0 Hub
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=534d ProdID=2109 Rev=21.00
S: Manufacturer=MACROSILICON
S: Product=USB Video
C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 0 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#=0x1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I: If#=0x2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#=0x3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#=0x4 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=05.10
S: Manufacturer=Linux 5.10.63-v7l+ xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
Alles anzeigen
v4l2-ctl --all
Driver Info:
Driver name : uvcvideo
Card type : USB Video: USB Video
Bus info : usb-0000:01:00.0-1.2
Driver version : 5.10.63
Capabilities : 0x84a00001
Video Capture
Metadata Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : uvcvideo
Model : USB Video: USB Video
Serial :
Bus info : usb-0000:01:00.0-1.2
Media version : 5.10.63
Hardware revision: 0x00002100 (8448)
Driver version : 5.10.63
Interface Info:
ID : 0x03000002
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : USB Video: USB Video
Function : V4L2 I/O
Flags : default
Pad 0x01000007 : 0: Sink
Link 0x0200000d: from remote pad 0x100000a of entity 'Processing 2': Data, Enabled, Immutable
Priority: 2
Video input : 0 (Camera 1: ok)
Format Video Capture:
Width/Height : 720/480
Pixel Format : 'YUYV' (YUYV 4:2:2)
Field : None
Bytes per Line : 1440
Size Image : 691200
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: ITU-R 601
Quantization : Default (maps to Limited Range)
Flags :
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 720, Height 480
Default : Left 0, Top 0, Width 720, Height 480
Pixel Aspect: 1/1
Selection: crop_default, Left 0, Top 0, Width 720, Height 480, Flags:
Selection: crop_bounds, Left 0, Top 0, Width 720, Height 480, Flags:
Streaming Parameters Video Capture:
Capabilities : timeperframe
Frames per second: 30.000 (30/1)
Read buffers : 0
brightness 0x00980900 (int) : min=-128 max=127 step=1 default=-11 value=-11
contrast 0x00980901 (int) : min=0 max=255 step=1 default=148 value=148
saturation 0x00980902 (int) : min=0 max=255 step=1 default=180 value=180
hue 0x00980903 (int) : min=-128 max=127 step=1 default=0 value=0
Alles anzeigen
v4l2-ctl --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[1]: 'YUYV' (YUYV 4:2:2)
Size: Discrete 1920x1080
Interval: Discrete 0.200s (5.000 fps)
Size: Discrete 1600x1200
Interval: Discrete 0.200s (5.000 fps)
Size: Discrete 1360x768
Interval: Discrete 0.125s (8.000 fps)
Size: Discrete 1280x1024
Interval: Discrete 0.125s (8.000 fps)
Size: Discrete 1280x960
Interval: Discrete 0.125s (8.000 fps)
Size: Discrete 1280x720
Interval: Discrete 0.100s (10.000 fps)
Size: Discrete 1024x768
Interval: Discrete 0.100s (10.000 fps)
Size: Discrete 800x600
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
Interval: Discrete 0.200s (5.000 fps)
Size: Discrete 720x576
Interval: Discrete 0.040s (25.000 fps)
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
Interval: Discrete 0.200s (5.000 fps)
Size: Discrete 720x480
Interval: Discrete 0.033s (30.000 fps)
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
Interval: Discrete 0.200s (5.000 fps)
Size: Discrete 640x480
Interval: Discrete 0.033s (30.000 fps)
Interval: Discrete 0.050s (20.000 fps)
Interval: Discrete 0.100s (10.000 fps)
Interval: Discrete 0.200s (5.000 fps)
Alles anzeigen
System: rPi4 HyperBian neuste Version 2.0.0-alpha.11
HDMI Splitter: FeinTech VSP01201
Danke schon im Vorfeld für eure Hilfe.
LG
Ritschi