Beiträge von Hayman

Zitat von pclin

Normal would be Main Out from Marantz to EZCOO.

Out 1 to TV EDID Copy On, Scaler Off, Out 2 to Grabber Scaler On. HDMI Out 2 from Marantz not used.

The Marantz only sees the EDID data from the TV and works as if nothing else was connected.

I can't say whether this solves your problem.

regards pclin

Alles anzeigen

Hello friend,I've did what you told me and spilt the main output of the Marantz and wacht the Hole movie with no problem . Hope will keep like that! Still can't understand why that's happened when I use the secondary output.

Okey I'll try that ,I used the secondary output just not to lose anything from the video quality .I'll try it and let you know

Hello friends,

I've a working Hyperion on pi4 ws2812b and 3 wled.but when I play a movie the picture goes black for few seconds and come back it's happened alot ! Any help please? My setup is

Nvidia shield pro to Marantz (SR6015)

from Marantz main output to TV ,

secondary output to

ezcoo 4K ( 4K 120Hz HDMI 2.1 Splitter 8K 60Hz 1 in2 out VRR ALLM HDCP2.3 HDR10 8KUHD Dolby Vision Atmos Scaler ) splitter and scaler.

4K 120Hz HDMI 2.1 Splitter 8K 60Hz 1 in2 out VRR ALLM HDCP2.3 HDR10 8KUHD Dolby Vision Atmos Scaler 4K EDID 1080P Dual Monitors HDMI 2.1 Splitter 1X2

Mode: EZ-SP12H21 4K 120Hz HDMI 2.1 Splitter 8K 60Hz 1 in2 out VRR ALLM HDCP2.3 Compatible with NVIDIA, AMD, PS5, Xbox

www.easycoolav.com

from ezcoo to USB grabber ( Video Recording Card, Exquisite 4K HDMI to 1080P USB )

to the PI4 !

Is there anything in the settings I can change to prevent the signal loss action?

Thanks

hello, can you share it with us please