Hey, alright, i ordered this power supply and wanted to use it for the ESP32 and the LED strip. Do you think that would be sufficient for both? Or would you recommend to still use an external power supply for the ESP32?
And how exactly have you wired all of this together? So which of the 5 wires of the SK6812 did you wire to the ESP32, which to the power supply, etc.? And did you use any fuse or transistors?
Thanks!
Hey there,
all right, now have an ESP32-WROOM-32D flashed with WLED in front of me and the LED strip (SK6812 RGBW-NW 60 LEDs/m) will also arrive in the next few days.
My question is: What do i also need for the Hyperion setup? Do i need an external energy source for the mentioned strip or is the voltage of the ESP32 enough? And do i have to power the ESP32 with a special power supply or is an old phone charger + micro usb cable sufficient?
Kind regards
Thank you two for your answers!
So the LG would speak with the ESP32 which is connected to the LED strip, right?
Nothing more is needed for that? Are there any cases or something like that to connect the ESP directly to the strip? I would rather not like to use a development board behind my TV. And can you recommend me a good ESP32 with everything which is needed (eg. case, cable, ... ?) and an LED-strip? (The SK6812 RGBW-NW 60 LEDs/m looking like a good start)
Greetings
PS: sorry for these dumb questions. I hated microcontroller programming since for ever, but want to try this ambilight solution even more 
Hallo zusammen,
vorab die Hardware:
- OLED77C22LB (webOS Version: 7.2.0-44 (mullet-marine), Software Version: 03.21.30)
- NVIDIA Shield Pro
- Raspberry Pi 4
Nachdem der Root des C2 funktioniert hat, wollte ich mich nun mit dem ambientlight beschäftigen, wofür es im webOS Homebrew Store auch einige Applikationen gibt (https://repo.webosbrew.org/apps/org.webosbrew.piccap, https://repo.webosbrew.org/app…webosbrew.hyperhdr.loader, https://repo.webosbrew.org/app…osbrew.hyperion.ng.loader).
Nun wollte ich fragen, ob es da eine unkomplizierte Möglichkeit gibt einen LED-Streifen anzusteuern, ohne einen weiteren Microcontroller zu kaufen und diesen gar flashen zu müssen.
Ich habe auch einen Raspberry Pi 4 für andere Applikationen im Betrieb, kann aber nur als Server verwendet werden und demnach nicht die GPIO-Pins.
Meine Traumvorstellung wäre ein WiFi-LED-Streifen der direkt von einer der genannten webOS Applikationen angesteuert wird oder der Raspberry Pi als Proxy dient.
Ist sowas möglich?
Danke und viele Grüße im Vorraus
---
Hello all,
first of all the hardware:
- OLED77C22LB (webOS version: 7.2.0-44 (mullet-marine), software version: 03.21.30)
- NVIDIA Shield Pro
- Raspberry Pi 4
After the root of the C2 worked, I now wanted to deal with the ambient light, for which there are also some applications in the webOS homebrew store (https://repo.webosbrew.org/apps/org.webosbrew.piccap, https://repo.webosbrew.org/app…webosbrew.hyperhdr.loader, https://repo.webosbrew.org/app…osbrew.hyperion.ng.loader).
Now I wanted to ask if there is an uncomplicated way to control a LED strip without buying another microcontroller and even having to flash it.
I also have a Raspberry Pi 4 for other applications in use, but can only be used as a server and therefore not the GPIO pins.
My dream idea would be a WiFi LED strip that is directly controlled by one of the mentioned webOS applications or the Raspberry Pi serves as a proxy.
Is something like this possible?
Thanks and many greetings in advance
