Posts by refrivera

I have tried https://www.amazon.com/dp/B0839PRQ2V?tag=hyperioforum-21&ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 and it worked for about a month and now loses connection randomly.

I then got https://www.amazon.com/dp/B0B7W94LHB?tag=hyperioforum-21&ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 and the display goes black when it detects both outputs.

My setup is Hyperion on Raspberry Pi 4 with https://www.amazon.com/dp/B0C2MDTY8P?tag=hyperioforum-21&ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 . The input is an Apple TV that I stream Plex with.

Do you have a recommendation on what I might be doing wrong or a different splitter to try?

Thanks for your help!

I have tried two different splitters and both have different problems. What is everyone using today?

I have recently setup Hyperion and when I do the color calibration and tell Hyperion to display "blue" it will display the correct color. When streaming content, the Blue's are showing up as Purple.

Any ideas what settings I will need to change?

I hooked the grabber up to my pc and it sends video to the camera app with no issue. It's been working for over an hour.

Any other suggestions?

I am streaming content from Plex, so I don't think it's a DRM or HDCP problem. I'm new to this, so could be wrong.

The capture card I am using states it is HDCP 2.2 and has EDID.

When it stops working, this is what the logs say.

2024-12-29T17:06:49.257Z [V4L2] (ERROR) Frame too small: 0 != 614400
2024-12-29T17:06:49.376Z [IMAGETOLED|TV Ambient Lighting] (DEBUG) (ImageToLedsMap.cpp:112:ImageToLedsMap()) Total index number is: 2084 (memory: 2084). Reduced pixel set factor: 0, Accuracy level: 2, Image size: 107 x 80, LED areas: 92
2024-12-29T17:08:09.283Z [MUXER|TV Ambient Lighting] (DEBUG) (PriorityMuxer.cpp:293:setInputImage()) Priority 240 is now inactive
2024-12-29T17:08:09.284Z [MUXER|TV Ambient Lighting] (DEBUG) (PriorityMuxer.cpp:422:updatePriorities()) Set visible priority to 255
2024-12-29T17:08:09.284Z [HYPERION|TV Ambient Lighting] (DEBUG) (Hyperion.cpp:645:handleSourceAvailability()) No source left -> Pause output processing and switch LED-Device off
2024-12-29T17:08:09.284Z [LEDDEVICE|TV Ambient Lighting] (INFO) Switching device ws281x OFF
2024-12-29T17:08:09.284Z [LEDDEVICE|TV Ambient Lighting] (DEBUG) (LedDevice.cpp:468:powerOff()) Power Off: ws281x
2024-12-29T17:08:09.284Z [LEDDEVICE|TV Ambient Lighting] (DEBUG) (LedDevice.cpp:363:writeBlack()) Set LED strip to black to switch LEDs off
2024-12-29T17:08:09.285Z [LEDDEVICE|TV Ambient Lighting] (INFO) Device ws281x is OFF

Newbie here...

I have setup Hyperbian on a Raspberry pi 4 and everything works on initial setup. At a random time Hyperion does not detect any video from the capture card. If I toggle "Capture USB Input" off then on, it restores the video feed and the LEDs begin to work again (or I can reboot the pi).

Any suggestions to resolve this?

My setup is Roku -> Rybozen Capture Recording Streaming Broadcasting -> Rasberry Pi