Posts by NHFFMNN

Hallo pclin,

Hyperion wird mit root gestartet...

User ist Hyperion (Standard Hyperbian Image --->sorry, macht ja einen Unterschied).

Hab jetzt einen MS2130 Grabber dran, und dieser läuft stable, heißt wird direkt sauber erkannt. Nun muss ich aber immer noch wenn ich den Strom abschalte und alles neu hoch fahre, die USB Aufnahme einmal aus, und wieder anschalten... dieses Problem haben ja anscheinend mehrere mit einem nicht wirklich empfohlenen Pi Modell

Guten Abend, kann es sein das ein RP1 Probleme mit einem digitalen Grabber (ms2109) hat. ws2801 laufen auf hyperion.ng (raspbian) wenn ich die USB Aufnahme aus und einschalte sporadisch, aber nicht immer und schon garnicht beim booten des Systems. Hyperion ist als root User auch mit in der Video Gruppe. Langsam verzweifel ich...

Mit freundlichen Grüßen

hyperion ist in the video group =( but IT wont Work probably =(

Sometimes it works, sometimes not... fck! what do i wrong?

ok... ive logged in with hyperion, ambientelight, and then typed: sudo usermod -a -G video hyperion, right?

_{ahh hallo pclin. Ich habe schon einige Beiträge von dir gelesen... wo kann ich das den einstellen?}

_{Hast du den vielleicht eine Idee was es sein könnte bei meinem Ambilight? Der Grabber hat doch eigentlich einen vernünftigen Chip ---> MS2109? Mittlerweile läuft es irgendwie gar nicht mehr obwohl meine Hyperion Config nichts behindern dürfte, und der Grabber die niedrigsten Anforderungen abgibt MJPEG, 640x480, 10fps...}

Mit freundlichen Grüßen

or is it my old Raspberry Pi 1?

Hello everyone,

ive done my second hyperion project in 12 years as a absolut noobie. Everything is working fine, but i think hyperion cant connect to my capture device after booting. To run the leds, i need to switch USB capture in the WebUi off and on. do i need another splitter/grabber combination? this ist my actual -->

TenYua Capture Camcorder Aufnahme Streaming

i hope you can help me 🙈

friendly regards!

2025-01-08T22:57:48.182Z [EFFECTFILES] (INFO) 41 effects loaded from directory :/effects/
2025-01-08T22:57:48.342Z [EFFECTFILES] (INFO) 23 effect schemas loaded from directory :/effects/schema/
2025-01-08T22:57:48.362Z [EFFECTFILES] (INFO) 0 effects loaded from directory /home/hyperion/.hyperion/custom-effects/
2025-01-08T22:57:49.279Z [V4L2] (INFO) Set image size decimation to 1
2025-01-08T22:57:49.313Z [V4L2] (INFO) Set flipmode to NO_CHANGE
2025-01-08T22:57:49.315Z [V4L2] (INFO) Set new frames per second to: 30 fps
2025-01-08T22:57:49.328Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video14' error code 13, Permission denied
2025-01-08T22:57:49.350Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video22' error code 13, Permission denied
2025-01-08T22:57:49.351Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video12' error code 13, Permission denied
2025-01-08T22:57:49.371Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video20' error code 13, Permission denied
2025-01-08T22:57:49.392Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video1' error code 13, Permission denied
2025-01-08T22:57:49.394Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video10' error code 13, Permission denied
2025-01-08T22:57:49.400Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video15' error code 13, Permission denied
2025-01-08T22:57:49.401Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video23' error code 13, Permission denied
2025-01-08T22:57:49.427Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video13' error code 13, Permission denied
2025-01-08T22:57:49.428Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video31' error code 13, Permission denied
2025-01-08T22:57:49.429Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video21' error code 13, Permission denied
2025-01-08T22:57:49.431Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video11' error code 13, Permission denied
2025-01-08T22:57:49.432Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video0' error code 13, Permission denied
2025-01-08T22:57:49.448Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video18' error code 13, Permission denied
2025-01-08T22:57:49.449Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video16' error code 13, Permission denied
2025-01-08T22:57:49.622Z [EVENTS-SCHED] (INFO) Disabling event scheduler
2025-01-08T22:57:49.806Z [DAEMON] (INFO) CEC event handler created
2025-01-08T22:57:49.336Z [LEDDEVICE|First LED Hardware instance] (INFO) Start LedDevice 'ws2801'.
2025-01-08T22:57:49.359Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2801 ON
2025-01-08T22:57:49.359Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2801 is ON
2025-01-08T22:57:49.360Z [LEDDEVICE|First LED Hardware instance] (INFO) LedDevice 'ws2801' enabled
2025-01-08T22:57:49.418Z [EFFECTENGINE|First LED Hardware instance] (INFO) Run effect "Rainbow swirl" on channel 1
2025-01-08T22:57:49.540Z [FLATBUFSERVER] (INFO) Started on port 19400
2025-01-08T22:57:49.557Z [PROTOSERVER] (INFO) Started on port 19445
2025-01-08T22:57:49.594Z [HYPERION|First LED Hardware instance] (INFO) Initial foreground effect 'Rainbow swirl' started
2025-01-08T22:57:49.843Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video14' error code 13, Permission denied
2025-01-08T22:57:49.849Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video22' error code 13, Permission denied
2025-01-08T22:57:49.855Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video12' error code 13, Permission denied
2025-01-08T22:57:49.858Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video20' error code 13, Permission denied
2025-01-08T22:57:49.859Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video1' error code 13, Permission denied
2025-01-08T22:57:49.887Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video10' error code 13, Permission denied
2025-01-08T22:57:49.905Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video15' error code 13, Permission denied
2025-01-08T22:57:49.914Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video23' error code 13, Permission denied
2025-01-08T22:57:49.945Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video13' error code 13, Permission denied
2025-01-08T22:57:49.958Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video31' error code 13, Permission denied
2025-01-08T22:57:49.963Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video21' error code 13, Permission denied
2025-01-08T22:57:49.995Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video11' error code 13, Permission denied
2025-01-08T22:57:49.999Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video0' error code 13, Permission denied
2025-01-08T22:57:50.002Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video18' error code 13, Permission denied
2025-01-08T22:57:50.005Z [V4L2] (ERROR) Throws error nr: Cannot open '/dev/video16' error code 13, Permission denied
2025-01-08T22:57:50.008Z [HYPERION-INSTMGR] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2025-01-08T22:57:50.286Z [JSONSERVER] (INFO) Started on port 19444
2025-01-08T22:57:50.393Z [EVENTS-CEC] (INFO) CEC handler disabled
2025-01-08T22:57:52.704Z [WEBSERVER] (INFO) 'Hyperion http-Webserver' started on port 8090
2025-01-08T22:57:53.096Z [WEBSERVER] (INFO) 'Hyperion https-Webserver' started on port 8092
2025-01-08T22:57:55.784Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2801 OFF
2025-01-08T22:57:55.793Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2801 is OFF
2025-01-08T22:57:55.893Z [EFFECTENGINE|First LED Hardware instance] (INFO) Effect [Rainbow swirl] finished

so... i installed everything correctly, but hyperion wont get a signal from the old Lightberry grabber (no signal screen in live Video). Maybe hes broken over the years?

Now i buyed another loop grabber (uvc Chip). hes working, but i think the pie cant handle the signal. is there a loop grabber someone can recommend? If not... which splitter-grabber combination?

now i set the resolution from the grabber on minimum and it works...

ahhh... now that i read a bit for myself, ther comes more and more knowledge from those days, so that i would like to delete my first Questions 🙈

ok, then i run it on SPIdev 0.0. with my good old Lightberry Splitter.

I read more actual Tutorials and a few recommended a 4k or 2k HDMI splitter and av converter, and i remember back then, there was "Lightberry HD". But why? I think a the end there ist the grabber with sd Output, or not? otherwise is it relevant for single Led spots? My Lightberry HDMI passthrough is 4k to TV?

friendly regards

l forgot... someone recommended to weld the leds and other cables together instead of connectors, If you got more then 90-100 leds. I got 112. ais that a Problem?

so i can let gpios be in the position where they are in the picture and only install Hyperion 2.01.6?

Hello together,

its been 10 years now, since i buy and run my first ambilight setup with the first old leds from Lightberry itself. Since 4 years or something like that, i put it away from tv. Inbetween i ordered ws2801. Now that i have a little free time and saw the package with the setup i would like to install the whole thing. But damn... it wasnt easy for me back then, but just like it is now, and offered me some questions.

Does the actual Hyperbian Image work with my old Pi b+?

I read anywhere else that i dont need the Lightberry Splitter anymore If i got the latest Hyperion version, ist that right?

Do i need to fix my gpios?

is there nowadays any option to grab the original TV Signal? (otherwise i only will run a ps4 on it)

i hope you can help a guy with almost no Idea in such things.

friendly regards =)