Posts by 730LEO

  • Live Video in Hyperion NOT WORKING - Black Screen

    Hi, thank you for your feedback!

    I’ve installed Hyperion version 2.0.16, but the Live Video Preview is still black.

    For testing, I’m currently using a Nintendo Switch, connected to the splitter that goes to an old flat TV and the grabber on the raspberry (i'll be using a Marantz AV receiver in the final set up).

    The TV receives the signal correctly through the splitter, so I assume the issue is related either to the grabber itself or how the Raspberry Pi detects it.

    I’m not sure if this could be related to HDCP, but even when I connect my PC to the grabber, the Live Video Preview in Hyperion doesn’t seem to work.

    I’ll attach the log again.

    Sorry if these are basic questions — I’m still quite new to all this.

  • Live Video in Hyperion NOT WORKING - Black Screen

    Hi,

    I’m trying to set up Hyperion on my Raspberry Pi 4 (HyperBian)

    My setup is:

    The grabber works fine when connected to my PC with OBS, but inside Hyperion the live video preview remains black.

    From the log I can see that:

    • The V4L2 grabber is detected as /dev/video0 ("USB Video: USB Video").

    • It initializes correctly at 640x480, 30fps, YUYV format.

    • Hyperion reports V4L2 started and the grabber is enabled.

    • However, the video feed never shows up in the web interface (only a black preview).

    I already tried:

    • Switching pixel format (MJPEG / YUYV)

    • Different resolutions (640x480, 1280x720)

    • With and without the HDMI splitter

    None of these made the video appear inside Hyperion.

    👉 I’m attaching the full Hyperion System Summary Report + logs below for reference.

    Does anyone have an idea why the grabber initializes but the video stream is not visible in Hyperion (So I assume no LEDs will light up if all the pixels are black)?

    Thanks in advance for your help!