Posts by Tyler983

You deserve a beer here in Italy

Guys I got it finally!!!! It was a Baudrate issue... I settled it at 500000 and problem is solved. Thx a lot for the patience, really!!!

You’re right and I’ve done it, some post ago I specify that it was a connection problem and when I solved it finally my leds light up and do the double blink check at startup. Assuming that, now what baudrate I can try to solve?

I've seen the thread, why are you showing it to me? Mines are apa102 should be the best but I can't understand what it mean with my issue

i setted it on bgr and other sequences too, but it's always the same. I'm using a 20a power supply but it seems to be a gnd issue

ground is connected to the Arduino properly. if I detach it they stop to blink and show solid false colors...

TPmodding Ambient_theater77 I had wrong connection and now leds are all on. The issue is that they are always blinking like a Christmas tree in wrong colors... following my debug log.

Please help me

The previous strip reported the same: apa102c printed on the strip.

It was an old lightberry strip led...

Quote from TPmodding

no i mean setting a static color at the hyperion webUI.

if the leds faulty then yes, if you have some rests, i would first try them, if those work then you know that your actual may have some issues

I suspect static color will not function but we'll see... Yes i have some rests i can use but i want to be sure what segment i should cut.
I've the doubt my leds aren't apa102 but sk9822, could be helpful to change the name inside the arduino sketch or it's the same thing?

Are you meaning in fastled examples?

This evening i'll do 2 things: verify connections and this thing

TPmodding if the first 6 leds are faulty, i just need to cut them and redo the connections?

If it could help, this is the link to my led strip https://it.aliexpress.com/item…042311.0.0.164e4c4dzsCH0L

Well, sure it's just the death... anyway when i started the first light test in fastled examples, they all turn on showing a warm light through the tv.

There's something i can try to be sure leds are not the problem?

Quote from TPmodding

https://pastebin.com/z3SfYBwx

try this one, i have changed eveything for you

Thx for the time you dedicated to me. I copied your new sketch but the result is always the same unfortunately: just few leds on at the beginning of the led strip in solid color.

I saw you modified bgr with rgb, I’ve done the same in the Hyperion webui but nothing… it seems there’s something in the arduino communication that doesn’t work, but what?

I found an error in the debug log about the led, maybe could help to know what to do....

Anyway now leds are not recognized in the component status

Ok leds definitely function. I trained with first light test and all of leds function properly.

So I think there’s something in the sketch or in the Hyperion setting

TPmodding can you help me please?

Well I don't think it's a led strip problem cause inverting the pins on the Arduino it was all on but with not proper colors. So leds are ok

TPmodding i tryied blink sketch and just the first 6 leds blink alternates. The rest of the leds is turned off... following the sketch compiled I used for test, maybe I've done it wrong...

ok i got it. when i'll be at home i'll try and report...

are you meaning it? #define ANALOG_MODE_LAST_LED 1\
Should i config the sketch compiling a minus number of my real leds? Ex: the real number of my leds is 200, i set in the sketch for max 100 leds

Shouldn't set my real led count to 200? Just a minus number like 100?

Really i don't know how to do it.
Can you please tell me how to do it, should i try one of the demos i can see in the fastled library in the arduino ide?

I’ve done with no luck. Nothing appear. Meanwhile today I will add a new 5v - 20a power supply.